ADDN ALTN TO BUILDING NO P 5 AT ATS BELAGAVI

Amount

M&L for complete removal of existing treatment of walls by scrapping, rubbing down, washing and applying two coats of oil bound distemper on walls over a coat of alkali-resistant primer over 1mm thick wall care putty and necessary scaffolding complete all as specified and directed.

M&L for one coat of oil bound distenper on old decorated surfaces of ceilings including necessary preparation of surfaces and necessary scaffolding complete all as specified and directed.

M&L for two coats of white wash on old decorated surfaces of walls, pillasters, cornices, etc., including necessary preparation of surfaces and necessary scaffolding complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old wooden surfaces of any description over 10cm width or girth including necessary preparation of surfaces complete all as specified and as directed.

M&L for one coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surfaces complete all as specified and as directed.

S&F Anodised aluminium powder coated frame for doors, windows, ventilators and partition with one or more rebates including jointing cleat for fixing etc. complete all as specified and as directed.

M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both sides with coloured plain laminations fixed with screws/clips to aluminium frame work in any position complete all as specified and as directed,

Demolition of cement concrete (unreinforced) in floors and pavings not exc 15cm thickness below or above ground level including removal of debris out of MD land complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregates) as in sub-floors, sub-bases, floors and pavings, etc. complete all as specified and as directed.

M&L for machine cut pre-polished Kota stone slab flooring 20mm to 22mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 20mm screed bed in cement mortar 1:4, complete all as specified and directed.

M&L for machine cut pre-polished Kota stone slab 18mm to 20mm thick in steps skirting, dado over and including 10mm thick rendering in cement mortar 1:3 and jointed with grey cement slurry mixed with pigments to match the shade of the slab complete all as specified and directed.

S&F 25mm dia chromium plated brass curtain rod having wall thickness of 1.25mm complete all as specified and as directed

S&F stainless steel brackets for fixing of 25mm dia curtain rod to wall and including decorative stops/ rollers/end cap fixed to both ends of 25mm dia stainless steel rod, all as specified Note: Each pair inclusive of two numbers of stainless steel brackets and two numbers of decorative stainless steel stops/roller/end cap.

S&F 12mm thick plywood grade BWR, type BB, fixed with timber frame work to make shelves etc. including edges beading of required width and varnishing complete mounted over two nos fillet brackets (sectional area of fillet -13 to 25 sqcm) fixed to wall with screws complete all as specified and directed.

S&F15mm dia bore Bib taps with nozzle, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for pipe complete all as specified and directed.

S&F stainless steel hooks 50mm length with SS plate fixed to wall for cloth hanger complete all as specified and directed.

S&F plain mild steel wire, 3.15mm dia, galvanised class 3, in detached work such as for mosquito nets and including straining bolts, hooks, eyes fixed to wall, securing with and provision of galvanised iron tying wire of hanging portion with ceiling with galvanised iron staples or steel pins complete all as specified and directed.

S&F mild steel adjustable hooks 6mm dia rod with rack bolt including lugs for hooks fixed to wall with fastners and bolts and making good for mosquito net wire complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed.

M&L for preparation of floor and wall surfaces, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry complete all as specified and directed.

M&L for applying first layer of cement slurry at 0.488 kg/ sqm mixed with Acrylic based polymer 'ARMOUR -CRETE' of structural water proofing pvt ltd by ratio 1:2 (one Armour Crete : Two cement) or 'POLYCRYL' of Green boro polychem pvt ltd by ratio 1:2 (one polycryl : Two cement) or Ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. This layer will be allowed to Air Cure for 4 hours and as directed

M&L for applying second layer of 1.5mm to 2.0mm thick slurry of cement at 0.242kg/sqm mixed with acrylic based polymer 'ARMOUR CRETE' of structural water proofing pvt ltd and silica sand by ratio 1:2:2 (Armour-crete : cement : silica sand) or 'POLYCRYL' of Green boro polychem pvt ltd and silica sand by ratio 1:2:2 (Polycryl : cement : silica sand) or ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. This layer will be allowed to Air Cure for 4 hours followed by water curing of 48 hours and as directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in lean concrete in sunken portion complete all as specified and directed.

Dismantling wall floor hearth tiling including cement mortar bedding (but not backing) and removing unserviceable material complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles laid over and including 15mm thick screed bed in CM(1:6) complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10 cm thick backing with CM(1:4) complete all as specified and directed.

S&F in repairs PVC SWR pipe 75 mm bore, in any length with rubber ring joints, fixed to walls including taking down existing pipe making good the existing surface complete all as specified and directed.

S&F in repairs 75 mm dia bore PVC (SWR) bend of any radius complete all as specified and directed.

S&F in repairs 75 mm dia bore PVC (SWR) bend with oval access door complete all as specified

S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Taking up or down 15 mm bore GI/PPR/PVC tubing and connections along with fittings complete all as specified and directed.

S&F 15mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc complete all as specified and directed

M&L for cutting holes of superficial area not exceeding 150 Sq cm into or through in brick walls built in cement mortar or cement lime mortar and stone walls built in cement mortar or PCC solid block walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

M&L for pre cast cement concrete block masonry 1:3:6, type C1 (using 20 mm graded crushed stone agrregates) solid blocks not exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm complete all as specified and directed

S&F 30mm thick second class hardwood plain, framed, panelled shutters (any number of panels), facytory made with panels of timber flat on both sides (feather eged), or of veneered particle board medium density, wood particle board witn commercial face veneers; supplied and fitted to chowkats complete all as specified and directed

S&F second class hard wood glazed and skeleton shutters facytory made, 30 mm thick, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth including necessary preparation of surfaces complete all as specified and directed

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F 100 mm long butt hinges stainless steel to door frame with necessary screwing or bolting complete all as specified and directed.

S&F 150 mm long aluminium anodised handle fabricated type complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed .

M&L for 300 mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type complete all as specified and directed.

M&L for dismantling of boarding of old built in cup boards fixed in any position with nails complete all as specified and as directed.

S&F figured glass, pin head type 4 mm thick, not exceeding 0.5 Square Metre for each pane, glazing with oil putty or aluminium beading complete all as specified and directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws or aluminium beading complete all as specified and directed

S&F Aluminium ventilator louvers type (up and down) with frame and aluminium section powder coated (minimum thickness of powder coating 50 micron) and 4mm thk frosted glass panes, without sash bars, aluminium sections of not less than 1.50mm thick including necessary joining cleats, glazing clips, EPDM rubber packing, snap beading, screws, complete all as specified & directed.

Taking down and refixing only towel rail at location complete all as specified and directed.

Taking down and refixing shutters of any description (MS/wooden shutter gauzed & glazed) in same opening not exc 1 Sqm, including easing, welding and adjusting and also refixing old builders hardware, renewal of unserviceable screws and new builder's hardware like handle, stays hinges of any type as per site requirement etc complete all as specified and directed

Taking down cement plaster on brick/concrete/stone masonry walls etc incl racking out joints, hacking for key, scrubbing down with water etc complete including removing rubbish off the premises complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonary surfaces or surface other than fair face of brick work for wall in CM 1:6 to be finished even & smooth withot using extra cement complete all as specified and directed

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed

S&F aluminium powder coated hat pegs (hooks) 125 to 175mm fixed on plate fixed to wall for cloth hanger complete all as specified and directed

Excavating in post holes (or similar holes ) each n.exc. 0.5 cum getteting out removing surplus excavated soil upto 50m distance complete all as specified and directed.

M&L for cement concrete type C2, 1:3:6 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified & as directed .

M&L for cement concrete type B2, 1:2:4 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified & as directed .

M&L for mild steel angle,flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for secruing wire mesh etc) including all necessary drilling, bolting or riveting etc conforming to Fe -290-GdeE-165 complete all as specified & as directed.

S&F 10 mm dia MS screw bolts (machine made ) with hexagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nut length of bolt exc 5 cm & n.exc 10 cm long complete all as specified & as directed.

S&F mild steel, galvanised, PVC coated chain link fencing complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh size & type to any type of standards rails,straining bolts, etc., including provision of line wire complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed

M&L two coats of synthetic enamel paints to new steel surfaces over a coat of red oxide primer including preparation of surface n.exc 10 cm width or girth complete all as specified & as directed.

S&F framed work as in doors or gates of angles or other section with gusset plats, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running, rails and guiedes) and hanging; also fastening and fixing omplete all as specified & as directed..

S&F Collapsible steel gates, top hung, consisting of channel pickets pivoted flat bars top and bottom runners, brass handle etc., as specified erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

M&L for point wiring for the following with PVC insulated and unsheathed multi standard 1.5 Sqmm FRLS copper Cable for one light point controlled by one way switch, and wire to be drawn in and including PVC casing capping 20/25 mm width complete with all accessories including MS sheet metal 1.2mm thick switch board or PVC rectangular switch board of suitable size to be fixed on wall respectively including white washing/colour washing/distembering to match the disturbed surfaces including PVC insulated and unsheathed multi standard 1.5 Sqmm FRLS copper cable as earth continuity conductor connected with common earth dolly complete all as specified and directed:-

One light point controlled by one, one way switch 5 Amp

One exhaust fan point controlled by one, one way switch 5 Amp

One 3 pin 5 Amps switch socket outlet

One 3 pin switch socket outlet 5 Amps on the same board with other switches

All as per item No 66 above but one 3 pin socket outlet 15 Amps independent board with 2.5 sqmm size cable -ditto-

M&L for complete for switch piano flush button single pole one way 5 Amp 240 V complete all as specified and directed

M&L for Socket outlet 3 pin 5 Amp flush type 240 volts complete all as specified and directed

M&L for swith socket combination 2 in 1, 5 pin 5 Amp flush type 240 volts complete all as specified and directed

S&F switch socket combination multipurpose 2 in 1, 5 pin 5 /15 Amps universal type controlled by one switch complete all as specified and directed

M&L for complete for ceiling rose surface backelite three terminal 240 volts complete all as specified and directed

S&F LED lights fitting 1x 20W, 220V, wall mounted LED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.5Sqmm three core flexible copper conductor cable from ceiling rose complete all as specified and as directed. Make: Havells Cat Part No. LUMILINE+BS20WLED865SPCSS or equivalent make as specified in list of makes of Particular Specifications

M&L for sub main wiring with two single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 2.5 sq mm drawn through suitable size of non-metallic PVC casing caping with one run 2.5 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE:- Two runs of 2.5 sqmm cable and one run of 2.5 sqmm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit

M&L for sub main wiring with two single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 4 sq mm drawn through suitable size of non-metallic PVC casing caping with one run 4 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE:- Two runs of 4 sq mm cable and one run of 4 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit

S&F sheet metal enclosure Double Door factory made distribution board 240 volts SPN 4 way, 200 Amps rated bus bar complete all as specified and as directed.

S&F MCB SPN 6 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including cutting the wall as round shape for exhasut the air complete all as specified and directed.

Sourabh Sanjay Angolkar (BID ID -3140542)

RAJENDRA KRISHNA SARAF (BID ID -3141126)

DHAIRYASIL RAMAKANT DESAI (BID ID -3137680)

Vinod Enterprises (BID ID -3137787)

M/s. N D KALING (BID ID -3141474)

M/S ADITYA CONSTRUCTIONS (BID ID -3138068)

M/S MAHADEV M PATIL (BID ID -3139344)

PURVIK CONSTRUCTIONS (BID ID -3140077)

RUDRAYYA I GHANTIMATH (BID ID -3140685)