REPAIRS MAINTENANCE OF FLOORING WALL TILING AND JOINERY PLUMBING AT OLD NAVY NAGAR UNDER AGE BR I NAVY NAGAR COLABA

Amount

M&L for dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M & L non skid coloured ceramic tiles exc 0.08 to n exc 0.18 Sqm 6 to 7mm in floors set and jonted in epoxy mortar and pointed in coloured / white cement to match the colour of tiles and including 20 mm thick cement mortar screedbed in CM 1:6 complete all as specified and directed by Enginner-in-Charge.

M & L for coloured glazed ceramic tiles size 600x300 / 300x200 6-7mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match of the shade over and incl 10mm thick backing coat in C:M 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for digital coloured ceramic tiles 300x450x7-8 mm thick in vertical surfaces (including designed borders) such as skirting & dados set & jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified & directed. Note:- (Rate of Designer border in vertical surface shall be deemed to be included into quoted rate)

M&L Ceramic tiles 7 to 8 mm thick (square ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge.

Ditto all as per item No 5above but as in skirting over & incl backing layer of 10mm thick in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L glazed Vitrified tiles of size 600mmx600mmx8-9mm thick in floors over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-In-charge.

M&L glazed Vitrified tiles of size 600mmx600mmx8-9mm thick in skirting over & including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-In-charge.

Taking down of old /unserviceable kitchen cabinet / Cupboard incl all fixture and fittings. For measurement superficial area in elevation will be measure.

S&F factory made 18mm(+/-0.5mm) thick one side prelam other side palin celuka PVC Ply of density 600kg/cum for kitchen cabinet shutter incl edge beading on exposed edges in matching colour

S&F factory made 18mm(+/-0.5mm) thick plain celuka PVC Ply of density 600kg/cum for Shelf/Partitions/Drawer incl edge beading on exposed edges in matching colour

Supply and fixing stainless steel soft closing 90 to 110 degree hinges complete all as specified and directed by Engr -in- Charge.

S&F 100 mm size Stainless Steel handle decorative type complete all as specified and as directed.

S&F factory made Almirah shutter made of 18mm thick Marine plywood, BP grade architect ply as per IS 710 ( Greenply/ century/ Kitply) with 0.8 mm thick high gloss laminate in front of shutter and 0.8mm plain laminate for rear side, colour and pattern as approved and fixed with approved adhesive as per manufacturers instructions, all shutter shall have PVC edge bands on all side with rounding moulding on vertical edges, Finish of PVC edge shall be same as per shutter finish, including fixtures and fastening for fixing of steel racks complete all as specified and directed by Engr -in- Charge.

S&F factory made partition for 18mm thick Marine plywood, grade BWP, type BB with both side 0.9mm thick plain laminate type 1 of surface finish, colour and pattern as approved and fixed with approved adhesive as per manufacturer's instruction, fixed with screws to timber frame work 0.8mm laminate lipping all edges etc complete all as specified and directed by Engr -in- Charge.

M &L for 40 mm magnetic catches with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 450mm long ISI marked Stainless Steel Sliding channel complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutter Shutters of any description exc 1.0 sq. m but n exc 2.0 sqm each complete all as specified and directed by Engr-in-Charge.

S & F factory made 35mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-In- Charge.

S & F 2nd class hardwood 35mm thick skelton shutters, open rebated and prepared to receive wire mesh edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing mesh etc, sizes of members of shutters as specified in SSR complete all as specified and directed by Engr-In- Charge.

Material & Labour for preparing new wood or wooden surfaces over 10 cm of width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-In- Charge.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges shall be paid separately

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S & F 100mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge.

S&F 150 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge.

S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete as specified by Engr-in-Charge.

S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring fixed complete all as specified and directed by Engineer-In-charge.

S&F in repairs 140 mm overall length floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring fixed complete all as specified and directed by Engineer-In-charge.

S&F in repairs 04 pieces pulley operated Cloth Drying system casting system casting of Aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 2.50 mtr with pulley made up of Devil mounted and fixed with self tapping screw.Rope will be HDPE double core of 4 mm with rope Guide at locking system to hide rope. Channel to be dia of min wt of pipe shall not be less than 0.20kg/Rm and max wt of pipe in one unit not less than 2 kg .Weight of rope shall be not less than the 550 gms/mtrs

S & F HDPE PVC pipes of pressure rating 6 kgf/Sq.cm of 40 mm bore fixed complete to walls, ceiling or in floors including bend and sockets, Tee etc. any type of pipe complete all as specified and directed by Engr-in-Charge.

S & F in repair PVC waste pipe 32/40 mm bore and 600 to 800mm long fixed with wash basin, kitchen sink and urinal etc complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.

S & F in repair vitreous china ware wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed by Engr-in-Charge.

S & F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store ccomplete all as specified and directed by Engr-in-Charge.

Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified etc complete all as specified.

S & F in repair Stop valves, 15mm dia cast copper alloy fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uninons and fixed complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster of any description etc. including raking out joints, hacking for key, scrubbing down with water, etc. Including removal of debris out side MD land complete all as specified and directed by Engr-in-charge.

Providing and applying fair finish 15mm thick plaster with ready mix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces ,wall surfaces internal/external including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge.

Providing and applying fair finish 10mm thick plaster with readymix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces, on ceiling including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge.

M & L for applying 2mm thick wall care putty on newly plastered walls complete all as specified and directed by Engr-in-Charge.

M & L for preparing new surfaces of wall and apply two coats of distemper oil emulsion white or tinted over and incl one coat primer on walls complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old wall surface and applying one coat of distemper oil emulsion white or tinted complete all as specified and directed by Engr-in-Charge.

M & L for preparation of newly plastered surface of ceiling and applying two coats of distemper oil emulsion, white or tinted complete all as specified and directed by Engr-in-Charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. 10.70

Material and labour for applying two coats of oil emulsion distemper over 1mm thick wall care putty on old decorated surfaces of wall incl complete removal of existing treatment Complete all as specified and directed by Engineer-In-charge.

Material & Labour for applying two coats of oil bound distemper on old decorated ceiling incl complete removal of existing treatment by washing, rubbing down complete all as specified and directed by Engineer-In-charge.

Material & Labour for preparing old previousely treated wooden surfaces over 10 cm of width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engg-In- Charge.

Material & Labour for prepration of old surfaces and apply two coat of synthetic enamel paint on steel surfaces of any description complete all as specified and directed by Engineer-In-charge.

Preparation of old decorated surfaces of walls by any means scrapping old surface washing the surface with Bleaching powder throughly,filling the cracks with cracks filling compound of DR Fixit crack free chemical or shrink free as per manufacturer instruction & applying one coat of weather proof acrylic based paint (100%) exterior grade including scaffolding etc all as specified & directed.

Taking down soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and directed by Engr-in-Charge.

Supply and fixing PVC (SWR) 110mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and rain water bracket suitable for 110mm pipe spacing 1.5m C/C as per CE (Navy) Mumbai TD No TD/2023/01. complete all as specified and directed by Engineer-In-charge.

S&F PVC (SWR) PVC (SWR) branch piece, single (single Y or T) equal or unequal for 110 mm bore pipe diminishing pieces or tapers on walls complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends (any radius) for rain water pipes 110 mm bore diminishing pieces or tapers on walls complete all as specified and directed by Engr-in-Charge.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

Material & Labour for chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure and cleaning and disposal of debris out side the MoD land etc complete as directed by Engr-in-charge. Hard concrete should not be removed by force complete all as specified and directed by Engr-In- Charge.

M&L for applying readymix/premix SBR Latex Polymer Modified mortar 25 mm thick including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed (Note : Rate includes the rate of steel scaffoldings. No separate payment will be paid for scaffoldings). (Note: SBR latex shall be will be measured and paid separately as supply only).

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas, chimny and similar suspended work including cutting of reinforcement cut as required to facilitate demolition including removing of debris out side MoD land complete all as specified and directed by Engg-In- Charge (Reinforcement cut as reqd to facilitate to demotion)

Providing and fixing special water tight centering and shuttering including bolting, strutting, propping etc. so as to withstand a pressure of 0.1 Mpa including removal of form from all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies etc. complete all as specified and as directed.

M&L for Reinforced cement concrete (nominal mix) 1:2:4 (using 20mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engr-In- Charge.

Material & Labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engg-In- Charge.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed

M&L for 18-20 mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over including bedding layer of 20mm thick in cement mortar (1:4) for laying floor finishes including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite Complete all as specified and as directed by Engineer-In-charge.

M&L machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed)

M&L machine cut pre-polished kota stone 20-25mm thick in risers of steps,dado ,skirting over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed)

Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engg-In- Charge.

Taking down Aluminium windows/ventilator incl frames & shutter of size n.exc 2 sqm each complete all as specified

S&F in repair colour anodized aluminium frame/track or shutters for windows ,ventilators etc with one or more rebates incl joining cleat for fixing etc, fixed or sliding type/louvered window or ventilator without sash bar ,aluminium including necessary joining cleats glazing clips rubber packing ,anodized aluminium snap beading screws locking arrangements etc, including necessary working platform (scaffolding ) and safety measures complete all as specified and as directed by Engr-in-charge

M&L aluminium grill with suitable aluminium anodised frame section of F section of size 23.4 x15.3 x 4 mm thick manufactured by M/S Deco grill pattern DG-102(7.50 mm and aperture 50mm ) complete all as specified and as directed by Engr-in-charge.

S&F 4.0 mm thick plain glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and directed by Engg-In- Charge.

S&F 4.0 mm thick frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and directed by Engg-In- Charge.

Material & Labour Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding complete all as specified and directed by Engg-In- Charge.

All as per Item No 76 but fixed in repairs complete all as specified and directed by Engr-In- Charge.

S&F in repairs rubber plain 45-60 mm dia washer in PVC flushing cistern complete all as specified and directed

Supply only approved SBR Latex polymer. (Note: Rate shall be in terms of solid contents of polymer).

jkconstruction (BID ID -3458091)

Nagma Enterprises (BID ID -3458203)

JANKI ENTERPRISES (BID ID -3458557)

Unitech Enterprises (BID ID -3458466)

SAHU AND SAHU CO. (BID ID -3464269)

Anil Industrial Corporation (BID ID -3463265)

GANGAJAL (BID ID -3456293)