SPECIAL REPAIR TO SEWAGE LINE AT BLDG NO PS-38 AND PS-39 TO MANHOLE, SINGLE JCOS LIVING ACCN AND CERTAIN REV AND MINOR WORKS UNDER GE NAGROTA.

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in any type of soil, complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete in any type of soil,complete all as specified and directed by Engineer-in-Charge

Removing surplus soil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point, complete all as specified and directed.

PCC 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete as specified and directed.

RCC 1:1.5:3 ( Normal mix) as in slab supported on walls/beam, (using 20mm graded crushed stone aggregate) complete all as specified

RCC 1:1.5:3 ( Normal mix) as in plinth, beams, (using 20mm graded crushed stone aggregate) complete all as specified

RCC 1:1.5:3 ( Normal mix) as in columns etc (using 20mm graded crushed stone aggregate) complete all as specified

Mild Steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips qfuality conforing to Gd I, IS 432(part I) or Fe-410 S or Fe- 410-o complete all as specified.

All as per ser item No. 9 here in above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and venders

Use and waste formwork to sides of concrete foundations footing base of column, plinth beams, raft and raft beams, sides and soffits of foundation complete all as specified.

Use and waste form work to soffits of suspended slabs such as roof slabs not exc 200 mm thick fair finished surfaces of concrete complete all as specified and directed

Use and waste formwork to edges of concrete flats , reads breaks in floors, window cills, roof etc n.exc 20 cm wide and sides RCC/PCC bands in wall, horizental or slooping and similar work exc 5 cm but n.exc 15 cm wide fair finished surfaces of concrete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 on wall surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces ofconcrete surfaces in CM 1:3 on ceiling finished even and smooth without using extra cement, complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion on walls including preparation of new plastered surfaces complete all as specified.

M&L for three coat of white wash on ceiling indl preparation of surfaces new, undecorated surfaces complete all as specified.

Preparation of new plastered surfaces of wall and applying two coats cement base paint over a coat of white wash, complete all as specified and directed.

Earth filling under floors, spreading, levelling in layers n. exc 25 cm thick each incl watering and well ramming as complete all specified and directed.

M&L for Hardcore of guage not exceeding 63mm, broken stone/boulders deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a ture surface broken stone/boulder complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for Screed bed or bedding layer in CM 1:4, 20 mm thick for laying floor finishes all as specified.

M & L for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over , complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and smooth using extra cement (including necessary joint filling with mixture of paving bitumen and sand in 1:3), complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground levels), complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M&L brick work with sub class 'B' bricks in 1:4 cement mortar on straight or curved on plan to any radius in half brick thick wall, complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and rough for fixing tiles, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as a sub base to receive topping layer finished even and rough, complete all as spd and directed

M & L for 450 x 300 x7 mm thick glazed ceramic tiles as on walls/vertical surface over 10 mm rendering in cement mortar 1:4, complete all as specified and directed.

M&L for Screed bed or bedding layer in CM 1:4, 15 mm thick for laying floor finishes all as specified.

M&L for Granite sotne 15 to 18 mm thick for shelves, counter etc (table rubbed and polished) of size not less than 2 m in length over 20 mm thick screed in CM 1:4 including cutting for sink/WHB and pointing with white cement 1:2 using marble dust and misture of pigment to match complete all as specified and directed

M&L for RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in chajjas shelves and similar work complete all as specified.

M&L for form work to chajjas troughs and similar items including edges complete all as specified and directed

S&F mild Steel TMT bars 6 to 8mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

S&F GI tubing 15 mm dia (medium grade) with all fitting and fixed to complete to walls and ceilings or laid in floors/roofs complete with all fittings ( such as bend, elbow, tee, short pieces, connecoter, back nuts, union etc) complete all as specified and directed.

All as per ser item no.38 here in above but 20 mm bore.

S&F cast copper alloy CP bib tap fancy tupe screwed down, screwed for iron pipe 15 mm dia complete all as specified and directed

S&F stainless stee sink made from AISI-304 (18/8) Gde steel of 1 mm over all size 688 x 534 bowl size 610 x 455 x 250 mm complete all as specifed directed by Engr-in-Charge & with following specification:- (a) Stainless steel waste coupling (b) Waste pipe and waste coupling

S&F for 110 mm bore PVC (SWR) waste pipes in any length with rubber ring joints laid in trenches or in floors complete all as specified

S&F for 110 mm bore PVC (SWR) bend fixed to rain water pipe complete all as specified

75mm thick Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone agg as in sub base complete all as specified and directed

50 mm thick plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in sub-floors, sub-base, floor and pavings etc complete, all as specified and as directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft soil, complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as foundation filling and mass concreate, complete all as specified and directed.

M&L for mild steel rolled work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. , conforming to grade Fe 410-S, complete all as specified and directed.

S & F prepainted galvatume aluminium zinc coating GI based semi corrugated/profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in copings, pllinth course, damp proof course, bed blocks, benching, sub base foundation PCC cills and similar items, complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type B-1 (using 40 mm graded crushed stone aggregate) as in floor , complete all as spd and directed

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor finished concrete surface even and smooth, complete all as spd and directed

M&L for 75 mm thick cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection , complete all as specified and as directed.

M&L Framed work as in door or gate of angles or other section's with gusset plate, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering complete conforming to Fe-410 incl one shop coat of red oxide primer complete all as specified and directed

M&L pintle hinges, hold fast and clampsand similar small articles etc confirm to Ge-290 Gde E 165 including necessary PCC 1:2:4 type B-1 using 20 mm graded aggregate for embedding complete all as specified and directed.

M&L mild steel plain black sheet 1.6 mm thick in hearth covering to steel gates and similar work, cut to size , holes punched, including round headed screws, clout nails or rivets and ficed to steel framing with plain 40 mm lap joints with riveted or welded seams, inclidng bending or turning up, mitred angle as required complete all as speicified and directed

Preparing of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Preparing of previously painted/new steel surface of any description, and applying two coat of synthetic enamel paint over a coat or red oxide primer complete all as specified and directed by Engineer in charge.

M&L sand for 50 mm thick filling under interlocking paver block incluidng watering and consolidation complete all as specified and directed.

M&L machine pressed precast concrete interlocking pver(with grey cement and pigment) any shgape andsize confirming to IS-15658-2006 of 80 mm thick M-40 grade complete all specified and directed

M&L rendering 15 mm thick on other than fair faces of brick work , stone masonery or concrete surfaces in CM 1:4 on wall surfaces finsihing the surface even and smooth without using extra cement complete all as specified and directed

Roughining surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing neat cement slurry with 3.0 kg of cement per sqm, complete all as specified and directed.

Septic tanks exc in ordinary soil foundation in PCC 1:2:4 brick work in cm 1:4 RCC slab covers including RCC precast manhole cover having 6MM plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc complete for 25 users.

Soakage wells exc in ordinary soil foundation in PCC 1:3:6 wells of Honey combed and solid in M-25 concrete including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/RR masonery /filling with brick bats, complete of size 1.2 M dia x 3 M deep.

150 MM dia SGSW pipes exc in ordinary soil at average depth of 3 M inclusive of manholes RCC precast manhole cover having 6 mm MS plate embedded all around/fibre reinforced cover wit angle iron frame pipes laid on Moorum bedding but pipes laid on PCC bed, including packing under and haunching against sides complete all as specified and directed.

RCC 1:1.5:3 ( Normal mix) as in foundation , including rafts footings, foundation beams, plinth, beams, base for columns (using 20mm graded crushed stone aggregate) complete all as specified

RCC 1:1.5:3 ( Normal mix) as in beams, roof beams, cantilevers, lintel over 1.5 m span, bands, chajjas etc (using 20mm graded crushed stone aggregate) complete all as specified

Use and waste of formwork to sides of pillars, columns complete all as specified and directed

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforcement with square tube complete all as specified and directed

M&L factory made solid panel PVC door shutters 30 mm thick (style) consistiong of frame made out of MS tube of top and bottom rails,. MS frame shall be covered with heat moulded plain coloured PVC channel having a PVC sheet stip of 20 mm width struck inside with solvent cement & stles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides & as insets for tip rail and bottom rail , paneled of plain colour PVC sheet to be fitted in the MS frame welded/sealed to be stiles and rail with suitable PVC sheet beading and jointed together complete all as specified and directed

S & F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) 300 mm long, fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete, all as specified .

S&F aluminium handle of size 150mm complete all as specified and directed

M & L for Glazed ceramic coloured printed tiles (first quality) of size 300 mm x 200 mm x 7 mm thick as in vertical surface, dado/skirting, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 300 x 300 x 7 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surface finished the surface fair and even to receive top layer complete all as specified and directed.

S & F 1000 Ltrs capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.

S & F 15 mm bore bib taps, chromium plated cast copper alloy with capston head, screwed down , screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F15 mm bore angle valve fancy type , cromimum plated with long shank(concealed type) cast copper alloy screwed down high pressure a handle screwed both ends for iron pipe or union, complete all as specified and directed.

S & F PVC connection 15mm size with PTMT nuts with length 450mm long, complete all as specified and directed.

S & F 100 mm dia bore Cast iron waste and vent pipes sand cast in any length with or without ears with cement joints laid in floors or trenches , complete all as specified and directed.

S&F 100 mm CI bend (any radius) dimensioning piece or tapper (larger bore measured) complete all as specified and directed

S&F Stack clamps out of 100 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends to wall or roof , complete all as specified

S & F in repairs 10 Ltrs capacity PVC valveles, less symphonic action type, flushing cistern low level, white with inlet, ball valve, float and handle 60 mm long flush pipe including brackets, complete all as specified and directed.

S&F cast iron soil based and vent pipe an any legth with or without ears with cemetn joint laid to wall 50 mm dia complete all as specified and directed

S&F cast iron cowls 50 mm dia complete all as specified and directed

Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing and apply two coat of synthetic enamel paint on steel surfaces over a coat of red oxide .Steel window shall be conforming to relevant IS, complete all as specified and directed.

S&F in repair Viterous china squatting any type pan Orrisa pattern long pan size 580mm x 440mm white with P or S trap, front and Integral foot rests any pattern excluding flushing cistern and flushing pipe, complete all as specified and directed.

M&L cement concrete in foundation , filling and mass concrete type D-2 1:3:6 (40 mm graded crushed stone agg) complete all as specified and directed

Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares in any size in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

S&F 150 mm bore dia SGSW drain pipe laid in tranches and jointed complete all as specified and directed

Concrete bed to drain pipes of bore 150mm including packing under,and haunching against the sides of pipes after they are laid and treated in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports complete all as specified.

S&F PVC (SWR) floor trap with grating including jointing to waste pipe in solvant for 75 mm bore including CP grating cover with or without hole complete all as specified and directed

S&F 20 mm bore stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle.screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engr-in-Charge.

S&F towel rail of 600mm length of PTMT fixed with including chromium plated brass screws and wooden /plastic cleats complete all as specified and directed

Vitreous china wash basin, white, flat back, size 550 X 470 mm including waste pipe all fitting and fixture complete all as specified and directed

S&F 15 mm piller taps cast coper alloy with capstan heads fancy type chromium plated screwd sown high pressure screwed for iron pipe complete all as specified and directed

S&F 32 mm dia PVC waster pipe for wash hand basin/Urinal complete all as specified and directed

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) and set in cement mortar complete all as specified and directed.

M&L for 200mm bore dia reinforced cement concrete pipes, class NP-2, laid and jointed complete with collars, complete all as specified and directed by Engr-in-charge.

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar complete all as specified and directed by Engr-in-charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4, complete all as specified and directed.

All as per ser item No. 105 here in above but except bricks complete all as specified and directed

Demolition of cement concrete (reinforced) of any description in any position not otherwise specially provided for reinforcement cut as required to facilitate demolition , complete all as specified and directed.

M & L for precast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded crushed sotne aggregate) as in cover slab and similar articles including necessary moulds/form work set in Cement mortar 1:6, complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in surface channels & drains , complete all as specified and directed.

M & L for PCC 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in bed of drains/channel , complete all as specified and directed.

Walling of random rubble masonary uncensored built in CM 1:4 complete all as specified and directed

Supply only liquid water proofing compound

Mild steel work as in posts and struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire , etc., flat iron fillets for securing wire mesh/chain link fencing including all necessary drilling, bolting or riveting etc., and similar work and providing MS flat for welding of GI mesh to posts or struts confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 4 mm dia galvanised steel wire of mesh size 75 mm x 75 mm made up into matteress or cages lapped wired and laid in position including closing after filling including fixing to seel post by welding etc all as specified and directed

Walling of random rubble masonary uncensored built in CM 1:4 except stones complete all as specified and directed

Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete, all as specified.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sqmm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2 mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the following;-

(a) One light point controlled by one switch 5 Amp.

(b) One ceiling fan/exhaust fan point controlled by one switch 5Amp

S&F switch piano flush type 5 Amps, single pole, one way, complete all as specified and directed.

S&F of ceiling rose 3 terminal PVC/Polycarbonate isolated body, complete all as specified and directed.

S & F batten integrated LED channel of 5W, 230 V frequency 50/60 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, power factor not less than 0.9 complete all as specified and directed.

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F LED bulb 7 watt complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 4 way 230 V, 50 Hz single door with neutral, and din rail, complete all as specified and directed.

S & F MCB SPN 40 Amps, 10 KA, 230 volts 'C' series, complete all as specified and directed.

S & F MCB single pole 6 to 30 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

Supply and fixing Exhaust fan 300 mm sweep single phase AC 230/240V complete with louvers for wall mounting including grouting, holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core 23/0.0076 size from ceiling rose to exhaust fan including cutting of the hole, complete all as specified and directed.

S&F sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 25 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 sqmm as earth continuity conductor connected to common earth and earth dolly complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 25,950.00 during AOC Note:- Tenderers shall not quote for this Schedule

M/S R S CONSTRUCTION CO