PROVN OF SECURITY FENCING AND GATE TO BLDG NO T-442 OF 118 (I) INF BDE GP PRO UNIT AT NIMU MIL STN UNDER AGE (I) NIMU

Exavation in post holes in hard/dence soil (for similar holes) each n.exc 0.5 cum, getting out, returning,filling in and remming each of broken rubble mixed with earth aroundin layers not exc 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed by the engr in charge.

M&L for Cement concrete PCC 1:2:4 type B2 using 40mm graded crushed stone agg as in fdn/ sub base of posts complete all as specified and directed by the engr in charge.

S&F Mild steel work in posts and struts in fencing including cutting tops to shape as directed ,drilling holes notching for wire etc, flat iron fillets for securing wire mesh/chain link fencing including all necessary welding, drilling, bolting or riveting etc and similar work and providing MS flat for welding of GI mesh to posts or struts and similar work conforming to complete all as specified and directed by the engr in charge. Fe-290 Gde E-165as spd and directed

S&F MS framed work as in doors or Gates of angle or other section with gusset plates, rails, braces, etc.,complete, drilled for fixing of steel sheeting or other covering. Doors,etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and fixing complete conforming complete all as specified and directed by the engr in charge. to Fe- 290(Gde E-165)

S&F Mild steel screw bolts 10mm dia(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, Diameter of neck is 11 to 15 mm, n exc 5cm long complete all as specified and directed by the engr in charge.

Supply and fixing mild steel round bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia ,or securing with clips of Fe-410W(Gde.E250) quality -A or Fe290(Gde-E-165) complete all as specified and directed by Engr-in-Charge.

Supply only chainlink fencing 4 mm dia of galvnised steel wire 100mm x 100mm made up into matteress or cages,complete all as specified and directed by the engr in charge.

Fixing only chain link fencing complete including line wires,any mesh,size and type to any type of standards rails ,straining bolts,etc including provission of binding wire. complete all as specified and directed by Engr-in-Char

Supply and fixing of barbed wire, galvnised,2 stand steel 2.24mm dia barbed with 2mm dia barb with wire 75mm spacing and straining and fixing to any type of standard rails straing bolts including ,securing or tying at crossing with and provision of galvanised mild steel wire,staples or steel pin etc and complete all as specified and directed by Engr-in-Charge.

M&L for prepration of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed by the engr in charge.