WBPHED/EE/AMD/ NIeT-04 of 2025-2026/3

Amount

Atfirst removing all damaged wiring from Guard Room, baranda etc also dismantling damaged Electric Meter, Main Switch from the wall by engaging skilled electrician.

Supply and Delivery of Following Materials at Mechanical Guard Room:-

4 ft. long 22 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens / fluorescent lamps with elegantly designed end caps. (Make-Approved Make)

3.5 Core X 25 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.( From Main Switch to DBs)(Make:-Approved Make)

100 A TPN Main Switch with Re-wireable fuse link within sheet steel enclosure.(Make -Approved make)

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(4 Way, Make:-Havells,Enclosure (DHDLVDRWAOFO04)+63 Amp FP MCB as a incomer-1 No + 32 Amp TP MCB as a Outgoing-4 Nos)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.(From DB to Switch Board)

4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.

Average Run-11 Mtr.(For Baranda)

Average run 8 Mtr.(For Room)

On Board-6 Amp, 3 Pin Plug Socket.

Distn. wiring with 2 x 36/0.3 (2.5 sqmm) single core stranded copper conductor PVC insulated and unsheathed copper wire (Brand approved by EIC) in 19mm dia 3 mm thick polythene pipe with 1x22/0.3 (1.5sqmm) PVC insulated and unsheathed coper wire as ECC, complete with all accessories embedded in wall (for 15 A plug point/exhaust fan point)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ ceiling by screws etc.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

3.5 core 25 sqmm cable.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust& moisture-proof entry of XLPE/PVC armoured cables as below :

3.5 Core X 25 Sqmm.

Supply and Delivery of Following Materials at Civil Guard Room:-

4 ft. long 22 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/ fluorescent lamps with elegantly designed end caps.(Make-Approved Make)

14 Watt LED Bulb with 1400 Lumen output.(Make:-Approved Make)

Supplying and fixing double door 8 Way Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(With 40 Amp TPN MCB as a incomer + 8 Nos 10 Amp MCB as a Outgoing)(Make-Havells, Model No-DHDPTODRW08)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.(From DB to Switch Board)

4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.

Average run 8 Mtr.(For Room)

On Board-6 Amp, 3 Pin Plug Socket.

Distn. wiring with 2 x 36/0.3 (2.5 sqmm) single core stranded copper conductor PVC insulated and unsheathed copper wire (Brand approved by EIC) in 19mm dia 3 mm thick polythene pipe with 1x22/0.3 (1.5sqmm) PVC insulated and unsheathed coper wire as ECC, complete with all accessories embedded in wall (for 15 A plug point/exhaust fan point)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required.

Supply and fitting, fixing 3 Blade 1200 mm Sweep ceiling fan, 220V-240V,50 Hz,AC.(Make:-Approved Make)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ ceiling by screws etc.

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Fixing only lamp.

Yard Lighting arrangement at Stack Yard:-

Supply of 90 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Make-Approved Make)

Supply of 4 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.( From Main Switch to DBs)(Make:-Approved Make)

Supply of 3 Core X 1.5 Sqmm industrial flexible copper cable wire/dia- 30/0.25 PVC insulated with PVC sheathed. (Make:-Approved Make)(For 13 Nos Street light from Pole)

Supply of 100 A TPN Main Switch with Re-wireable fuse link within sheet steel enclosure.(Make -Approved make)

9.0 Mtr. Long swaged and welded steel tubular pole as per IS-2713-1980 with CI Base Plate & CI Cap-Double arm bracket made of 40mm Dia 1.5 Mtr. Long..(Make:-Approved Make)

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly-Upto 9.0 mtr. Size 0.6x0.6x1.70 mts.

Laying of one No. 4 Core X 10 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.(DB to Pole to Pole)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 Core X 10 Sqmm.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint-Upto 9.0 mtr. long pole.

1st coat of aluminium paint over 1 coat of RO priming.

2nd coat of aluminium paint over 1st coat.

Dismantling and lowering of the outdoor lighting luminaries from the top of the pole as well as outside of pump house and OHR by using of scaffolding arrangement after disconnection of electrical connection etc as per direction.

Fitting & fixing of the outdoor lighting luminaries along with new & old accessories to the pole and sub-station building etc as per direction of EIC.

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below,Comprising of one 250 V,15 A Kit-Kat fuse unit, one NL on,porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1)after dismantling the damaged looping cable box etc. where necy. incl. painting-200 x 150 x 100mm.(For 7 Nos Pole)

Atfirst removing damaged kiosk box, debrish from wall with old strand gauge wiring as perdirection.

Connecting the pole to earth busbar including S & F GI (Hot Dip) wire of size as below,spiral on pole body as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

No. 12 SWG.

Earthing with GI earth spike(1822mmX20 mm) and grouted the same under the ground level as per direction.

RBTW Rectification portion(No-9):-

Withdrawing of Submersible pumping machineries from old river bed Tube Well along with Column pipe after disconnection of all pipe line and power line connection with the help of Derrick and Chain Pulley arrangement by engaging skilled technician as per direction of EIC.(10 H.P. S/M P/M.(From RBTWs No-9)

Lowering of Submersible pump Motor set along with 80 mm dia Column pipe part by part in the existing Tube Wells with an arrangement of Derrick and Chain Pulley arrangement, making Pipe line connection etc. all complete as per direction of EIC.(In Newly Sunk RBTW)

Making straight through joint between 1.5 mm2 or 2.5 mm2(motor cable) and 3 core X 6 mm2 flat submersible copper cable for extension of motor cable up to required lengh by supplying necessary seal kit to make joints leak proof all complete as per direction.(For RBTW No-9, one for Star & Other for Delta)

Making straight through joint between 3 core 6 mm2 flat submersible cable and 3 Core X 10 sqmm Al Armoured cable by supplying necessary seal kit and hardener to make joints leak proof all complete as per direction.(With Out Kit)

Add GST @ 18%

Add CESS @ 1%

M/S. SWAPAN BANERJEE (BID ID -6362247)

PESTCO INDIA (BID ID -6362257)