REPAIR AND PAINTING OF VARIOUS TYPE OF ALMIRAH STEEL, LOCKERS OTHER FURNITURE FOR OTM ACCN AT PMS

Amount

WOODEN/STEEL/TP FURNITURE Removing/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following wooden/steel/TP furniture without disturbing the other parts and supply and fixing new parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed and made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:-

FD-75(M) Chair CB Steel With Arm

Seat frame of existing size made out of 1st class teak wood duly -caning with new HDPE plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screws

Back frame of existing size made out of 1st class teak wood duly -caning with new HDPE plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screws

Handle made out of H.W(T.W) well seasoned of exisiting size and shape with required screw after finish with black polish.

FD/MAP/II/07 Repair to Table Dressing Ladies W/Stool.

Shutter made of ply board

Back made of 18mm thick MDF/pre-laminated particle board

Top made out of 18mm thick pre-laminated particle board of size 900x380mm with 4mm thick teak wood beading on front side

Side made out of 18mm thick pre-laminated particle board one side teak face

Side of drawer of size 330x115mm made out of 18mm thick pre-laminated particle board

Back of drawer of size 315x115x12mm

Bottom of drawer made out of 6mm ply wood of size 315x330mm.

Stainless Steel Handle 50mm

Magnetic Catcher

Openable Shutter of stool made out of plywood 12mm thick BWR IS-303

wheel of Stool

75 mm 40D Cushion covered of Stool

SS Telescopin channel

Mirror frame made out of teak wood well seasoned size 3130x19x25mm

Mirror & glass of size 1220x365x5.5mm thick

6mm th ply for back of mirror

FD-75(M) Chair CB Steel With out Arm

Seat frame of existing size made out of 1st class teak wood duly -caning with new HDPE plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screws

Back frame of existing size made out of 1st class teak wood duly -caning with new HDPE plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screws

FD-1031 Almirah Steel large W/Sh

Re-fixing the existing door shutters in original position with new pin type steel hinges of existing size duly welded as required including denting and necessary welding

Handle chromium plated heavy duty

Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved

3 way locking device as per drg.

Leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg.

Shelf of existing size and shape made out of MS sheet 1.00mm thick

FD-99(M) Board Notice 1200x900

Door glass of 4 mm thick of existing shape and size and making functional

Door shutter 2 way of existing shape and size and making functional

Baize green cloth of existing shape and size and making functional

Soft wood board 19 mm thick of existing shape and size and making functional

Wooden frame made of hard seasoned teak wood of existing shape and size and making functional

FD-220 Charpoy GI Pipe with ply top

Ply wood top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

6mm thick GI Medium grade check nuts suitable for 32mm dia GI pipe all as specified and shown on drawings (Each check nut will be measured as single unit)

32 mm dia GI medium grade 3 way elbow ISI marked all as specified and shown on drg and directed by Engr-in-Charge (Each GI Elbow shall be measured as single unit)

Long rail of GI tubing 32mm including cutting, threading and bringing the GI charpoy into the original shape as shown on drawing and directed by Engr-in- Charge. (Make: TATA/JINDAL).

Making short rails obtained from item No 5.04 above and fixing all as shown on drawing.

Making legs out of unserviceable long/short rails obtained from item 5.04 and 5.05 above including cutting, threading and fixing all as specified and directed by Engr-in-Charge.

FD-1032 Almirah Steel medium W/Sh

Re-fixing the existing door shutters in original position with new pin type steel hinges of existing size duly welded as required including denting and necessary welding

Handle chromium plated heavy duty

Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved

3 way locking device as per drg.

Leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg.

Shelf of existing size and shape made out of MS sheet 1.00mm thick

FD-1027 Form w/o back

Planks mde out of teak wood 25mm thick x255mm wide x1525mm long duly french polished and fixed with 9 Nos GI Bolts .

Legs made out of 25mm sq conduit (16 guage) of existing shape & size duly painted with black enamelled paint over a coat of primer.

Stiffners made out of 25mm sq conduit (16 guage) of existing shape & size duly painted with enamelled black colour over a coat of metal primer.

Rubber/ PVC shoes of existing shape & size.

FD/MAP-II/03 Table dining 6 Pers (MAP )

Table top made out of 18/19mm thick prelaminated particle board one side teak veneered with teak wood beading all around

Leg of size 750x45x90mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws

Long rail of size 1500 x 45 x 90 mm made out of 1st class well seasoned teakwood

Short top rail of size 900 X 45 X 90 MM . made out of 1st class well seasoned teakwood

MS Right angle of size 150 x 30 x 5 mm

PVC Shoes

FD/MAP-II/03 Table dining 4 Pers (MAP )

Table top made out of 18/19mm thick prelaminated particle board one side teak veneered with teak wood beading all around

Leg of size 750x45x90mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws

Long rail of size 1500 x 45 x 90 mm made out of 1st class well seasoned teakwood

Short top rail of size 900 X 45 X 90 MM . made out of 1st class well seasoned teakwood

MS Right angle of size 150 x 30 x 5 mm

PVC Shoes

FD/MAP/II/05 Chair Dinning

PVC seat 4mm thick existing size in its original position all as shown on drg

Front legs made out of Teak wood well seasoned in existing shape and size

Rear legs made out of Teak wood well seasoned in existing shape and size

Front rail of seat frame made out of Teak wood well seasoned in existing shape and size

Side rail of seat frame made out of Teak wood well seasoned in existing shape and size

Back rail made out of Teak wood well seasoned in existing shape and size

Short stiffener made out of Teak wood well seasoned in existing shape and size

Back rest batten made out of Teak wood well seasoned in existing shape and size

PVC Shoe

FD-1029 Locker Steel/ Locker Bed Side

Hasp & stappples of size 150 mm long chromium plated

Handle of size 100 mm long 'D' Type chromium plated

Hanging rod made out of 20mm dia chromium plated pipe 500mm long

FD-1004 Table office clerk steel

Top made out of 18/19mm thick prelaminated particle board one side teak veneered and other side balancing white with 19x4mm teak wood beading duly french polished all around the top.

Internal locks 40mm 4 lever with duplicate keys of approved quality.

Drawer of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.

Necessary welding in drawer to make functional as per existing size and shape. All as shown on drg.

PVC shoe

FD-1003 Table office officer steel

Top made out of 18/19mm thick prelaminated particle board one side teak veneered and other side balancing white with 19x4mm teak wood beading duly french polished all around the top.

Drawer of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.

PVC shoe

FD-1007 Table 900 x 600 x 760 mm Steel W/O/Drawer

Top made out of 18/19mm thick prelaminated particle board one side teak veneered phenol formal dehyde exterior grade with 19x4mm teakwood beading fixed with headless nails all around the top.

Steel long rail of size : 25mm x 25mm x 1.6mm thick. All as shown on drg and directed by Engineer-in-Charge.

Leg made out of 25mm x 25mm x MS tube 1.6mm aell thickness. All as directed by Engineer-in-Charge and as shown on drg.

Stiffner bottom made out of 25mm x 25mm, MS tube of 1.6mm wall thickness. All as directed by Engineer-in-Charge and shown on drg.

Short stiffner made out of 25mm x 25mm, MS tube of 1.6mm wall thickness. All as directed by Engineer-in-Charge and shown on drg.

PVC Shoes suitable for 25x2mm MS tube. All as directed by Engineer-in-Charge and shown on drg.

FD-1009 Table 900 X900 X 760 mm steel

Top made out of 18/19 mm thick pre-laminated particle board (ISI Marked) exterior grade one side teak veneered finish and other side having balancing white lamination with 19 x 4 mm teakwood beading all around the top and polishing the wooden frame shall be with french polish(to the entire satisfaction subject to minimum two coats) including preparation of surfaces by scrapping /smoothing the surface all specified and shown on drawing .

Electric welding to the broken /dislocated 25 x 25 mm square tube rails of tables 900 x900x 760 mm steel , length of welding exceeding 2.5 cm but not exceeding 5 cm ( each spots measured separately) thickness of metal to be welded not exceeding 6 mm , complete all as directed.

Rubber shoes off approved quality and tightly fitted and the bottom of legs all as specified and shown on drawing

FD/MAP-II/01 Charpoy Hard Top MAP

Ply-wood top of Size 1980X900X12mm thick, Commercial grade (07 ply) ISI Marked with beading all around, with and including 10 Nos galvanised countersunk nut andt Bolt of suitable size and length, 02 Nos washer for each nut and bolts as directed by Engr-in-Charge.

PVC Shoes. All as directed by Engineer-in-Charge and shown on drg.

FD-1038 Rack Steel 6 Tier (closed type)

Back to rack steel (closed type) made of MS Sheet of 1 mm thick of eixsting shape and size and making functional

Side made of 1 mm thick MS Sheet as per drg & making functional

Shelve made of 1 mm thick MS Sheet as per drg & making functional

MS angle iron to rack steel closed type as per drg & making functional

FD-165(M) Table dining ORs

Top made out of 18/19mm thick plain particle board exterior grade covered with with aluminium sheet 20 gauge, on top and alaaround as shown on drawing.

Long rail of size : 25mm x 25mm MS tube, 1.6mm thick, 1575mm long

Leg made out of 25mm x 25mm x MS tube 1.6mm wall thickness

Stiffener bottom made out of 25mm x 25mm, MS tube of 1.6mm wall thickness.

Stiffener top made out of 25mm x 25mm, MS tube of 1.6mm wall thickness

PVC Shoe

FD- 1023 Side rack w/3 tray steel

Nesessary denting & welding wherever required making the frame in its original position and making functionel all as per drg

MS angle iron to side rack as per drg & making functional

Shelves made of 1 mm thick MS Sheet as per drg & making functional

FD/E6/MAP/12 Chair Witting Steel

Back frame with Dimensions as shown on drngs. shall be of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam. The back frame shall be designed with contour lumber supports for extra comfort with PVC lapping all arounds complete all as specified and directed.

Seat frame of size 510x470x60. seat shall be of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam complete

Hand Rest with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant

FD-388(R) Charpoy IP Folding

Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

PVC Shoes

FD-284 Table 900x600x760mm without drawer/with drawer FD- (FD-42(m) ,FD-41(m) FD-291, FD-284,FD-283)

Top made out of 18/19mm thick prelaminated particle board one side teak veneered with standard PVC edging all around the top.

Legs (size 740x60x30mm) made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg

Long rails (740x25x65mm) made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg

Side rails (size 440x25x65mm) made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg

Side stiffiner (740x25x130mm) made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg for FD/41/FD-284

Drawer made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg

PVC Shoes as directed by Engineer-in-Charge and shown on drg.

FD-88(M) Table 900x900x760mm wdn

Top made out of 18/19mm thick prelaminated particle board one side teak veneered with standard PVC edging all around the top.

Legs of size (60x35x760mm long) made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg

Top rails of size (75x25x900mm long) made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg

PVC Shoes

FD-281 Sofa set 2 Seater

Front legs made out of Teak wood well seasoned in existing shape and size

Rear legs made out of Teak wood well seasoned in existing shape and size

Front rail made out of Teak wood well seasoned in existing shape and size

Back rail made out of Teak wood well seasoned in existing shape and size

Arm rest made out of Teak wood well seasoned in existing shape and size

Back wooden bearers made out of Teak wood well seasoned in existing shape and size

Bottom wooden bearers made out of Teak wood well seasoned in existing shape and size

Cushion 100 mm thick x 40 density of size 530x560mm covered with new tapestry cloth duly stitched.

FD/MAP/II/07 Charpoy IP Square Tube

Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

PVC Shoes

FD-86 (M) Trestle Store Room Wooden.

2nd class Hard wood (SAL) legs of size 405x100x100mm

2nd class Hard wood (SAL)Top Batten (Middle of size 2400x60x100mm)

2nd class Hard wood (SAL) Batten (Side) of size 2440x100x100mm

2nd class Hard wood (SAL) Batten (Short) of size 600x100x60mm

Repair to loose wooden trestle, Providing clamp piece of size 300mm x 40 mm x 5mm `L` shape with 6 nos screw including painting with black paint.

Preparation of surface of wooden trestle of any description and treated with two coats of creosote oil all as specified.

FD-1043 Trestle Store Room Steel

Necessary welding wherever required, restoe the frame in its original position and making the same in functional complete all as per drg

FD-275 Table writing

Top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around

Drawers made out of prelaminated particle board & 1st class well seasoned teakwood for sides and front & 6mm thick commercial plywood for bottom of drawers

stainless steel handle 50mm

legs made out of 1st classs well teak wood

long rail made out of 1st class well seasoned teak wood

short rail made out of 1st class well seasoned teak wood

long stiffiner made out of 1st class well seasoned teak wood

Short stiffiner made out of 1st class well seasoned teak wood

FD-279 Chair Dinning.

Front Legs made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.

Rear Legs made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.

Front rail of seat frame (Hole should be 12.5mm apart of each other) made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.

Side Rail made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.

Back Rail made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.

Short stiffener made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.

Back rest batten made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.

Remove the existing canning and supply and weave with 2mm thick new white plastic cane oval shape godrej patern and beading with 4mm thick new white plastic cane as apporeved by GE.

PVC shoes

TP Chair Auditorium

Arm rest of Chair Auditorium of Make- Zuari, Model No ZAC-102 and making functional.

Tightening of loosen side pannel by the help of removing old fastener and inserting new fastener of required size and tighten them.

Tightning of loosen back of chair Auditorium by inserting new Nut, bolt & washer of size 6 mm dia, 65 mm long.

75mm thick high density rubber foam of existing size & shape for seat and back of chair auditorium (Shape as per drg) duly covered with tapestry cloth made out of single piece of required size for seat complete all as directed by Engineer-in-Charge.

Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY/BLACK OR AS APPROVED by GE paint both inside and outside (outside only in case of round/square pipe/tube) by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture/TP furniture :- (Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat from GE

FD-75(M) Chair CB Steel With Arm

FD-75(M) Chair CB Steel With Out Arm

FD-1031 Almirah Steel large W/Sh

FD-1032 Almirah Steel medium W/Sh

FD-1029 Locker steel

FD-1004 Table office clerk steel

FD-1003 Table office officer steel

FD-1007 Table 900 x 600 x 760 mm Steel W/O/Drawer

FD-1009 Table 900 X900 X 760 mm steel

FD/MAP-II/01 Charpoy Hard Top MAP

FD-1038 Rack Steel 6 Tier (closed type)

FD-139 FMN Set /Frame for bed/charpoy

FD-165(M) Table dining ORs

FD- 1023 Side rack w/3 tray steel

FD/E6/MAP/12 / Chair Writing

FD-388(R) Charpoy IP Folding

FD/MAP/II/07 Charpoy IP Square Tube

FD-1043 Trestle Store Room Steel

Material and Labour for Complete removal of total existing painting/polish and applying two coats of high gloss polyurethane enamel paint (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss)by spray painting method over and including a coat of pink primer and prepration of surfaces Complete all as specified and as directed for the following furnitures :-

FD/MAP/II/07 Table Dressing Ladies W/Stool.

FD-99(M) Board Notice 1200x900

FD/MAP-II/03 Table dining 6 Pers (MAP )

FD/MAP-II/03 Table dining 4 Pers (MAP )

FD/MAP/II/05 Chair Dinning

FD-284 Table 900x600x760mm without drawer/with drawer FD- (FD-42(m) ,FD-41(m) FD-291, FD-284,FD-283)

FD-88(M) Table 900x900x760mm wdn

FD-281 Sofa set 2 Seater

FD-275 Table writing

FD-279 Chair Dinning.

NATIONAL CONSTRUCTION CO (BID ID -3468737)

M/s Baba kshatrapal Labour Contract And Construction Co-Operative Society Ltd (BID ID -3468559)

BISWAS ENTERPRISE (BID ID -3468590)

Jaibalaji Enterprise (BID ID -3468619)

SAI ENGINEERING (BID ID -3468827)

M/S. MAJUMDER CONSTRUCTION (BID ID -3468433)