Provision of furtunre RO system electrical arrangement and garden arrangement to exixting jain nagar knowledge centre at ward no14 in Thiruvallur Municipality

Supplying and erecting in position of 250 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid -1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with media bubble and Fine Sand and Activated Carbon Filling) set. (c) Feed Pump 0.50 HP – 1No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase - 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents Osmonic (USA) -1 No. and Membrane Pressure Vessel 40 x 40 -1 No & Pressure Gauge -2 Nos. (f) Flow Meter -1No. 20" Filter with Housing-1 No., LOW Pressure Switch-1 No., Level Switch - 1 NO. & Necessary CPVC Pipes and Fittings. The system shall be provide with TWO Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to Install the System in position and intact(250lts)

Supply and delivery of Reading chair with seat Material - Fabric,Back type- mid back arm type – fixed, arm warranty- 1year, brand- MBM seating height – (20 -21) inches , color – black, Height adjustable – yes, seat height adjustable -yes etc., completely.

Supplying and fixing conference hall – half round table to site, by using of MDF (Medium density fiber) panel sheets for 15 nos of seating capacity, the cost including of material charges, required hinges at bottom support, nails, screws for joints and finish the top with mica sheet and also including making and labour charges complete. (Total length (straight table) = 4.85 m, curve portion table length = 2.45 meter straight portion table width = 0.70 meters curvatures portion table width = 0.90m) Note: reading table may also provided as study table on theatre type having 8 to 10 seats on either side of the table in rows to accommodate 30 seats for reading even during training session.

Supplying and fixing of System table with Key Board Rack to Site, by using of MDF (Medium Density Fiber) panel Sheets, the cost including of material charges, making Charges ,Required hinges at bottom support, nails, Screws for joints and labour complete. At computer Zone area tables based on number of computers.(Measurements for Computer tables, For each system cabin length =0.90m, Width 0.50m, Height of table top from ground = 0.76m, cabin partition height from the table top= 0.25m)

Supplying and fixing of Study Table with Cabin to site, Each cabin length = 0.90m,width = 0.60m Height of table top from ground = 0,77m ,Cabin partition height from table top = 0.43m the cost including of all material charges, making charges Required hinges at bottom support, nails, screws for joints and labour etc., complete

Supplying and fixing of Reception table with Fittings to Site, by using of MDF (Medium Density Fiber) panel sheets, the table with the size of 2.20m x 0.60m and Height = 0.90m with Required trays and draws and Computer spaces as per site conditions. The cost including of material charges, making charges and labour etc., complete

Supplying and fixing of Librarian table with Fittings to site, by using of MDF (Medium Density Fiber) Panel sheets, the table with size 2.20m x 0.60m and height = 0.9m with required trays and draws and computer spaces as per site condition the cost include of material charges, making charges and labour etc., complete

Supplying and fixing of Manager Room Table to site, by using MDF (Medium Density Fiber) Panel sheets system fittings and keyboard section with overall table size of 2.20m x 1.10m with height 0.77m to site required trays and draws at both side, the cost includes of material charges,making charges etc., complete

Supplying and fixing of Paper Display to site, By using of MDF (Medium Density Fiber) panel sheets the display furniture table size of 2.50 x 0.45m and Height = 1.23m with Magazine Bay opening Each = 0.25m at both sides ,the cost including of material charges, making charges and labour etc., complete

Supply and fixing of book racks at ramp side: (4.16m x 2.56m= 9.81sqm) to site, by using MDF (Medium density fiber) panel sheets the cost including of material charges, making charges and labour etc., complete

Supply and fixing of book racks at ramp side: (3.86m x 1.67m= 6.44sqm) to site, by using MDF (Medium density fiber) panel sheets the cost including of material charges, making charges and labour etc., complete

Supply and fixing of book self of size 2.45m x 2.22m x 2.22m by using MDF(Medium density fiber) panel sheets the cost including material changers, making charges and labour etc., complete

Suppling and fixing charges drainage pipe 180mm 7inch 6kg/ cm2 star pipe

Supplying and filling in foundation and basement with Good Well Gravel Filling in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor Single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box, modular plate, 6A switch and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc as enquired SD23

Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories in flush with wall with 150mm x 100mm x 75mm MS switch box concealed type with 3mm thick hylum sheet cover for 15A 3 pin flush type non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and ranking good of the concealed portion for concealed power plug point for computers SD-15

Supplying and fixing of Name board letters in brass material Including Cost and Conveance and all other Material with Labour Charges etc.,Completed

Supplying and Painting letter with enamel paint and labour charges

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:1.5:3 (One cement, Two M - sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Gardening with korean carpet grass and croton including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

suppling diesel for generator

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with edges multi power point locks and also t operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking Systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws silicon packing all-round the frames. The window and should be got approved from the Executive Engineer before use on work (PWD SOR P9. No. 65)

supply and Fixing of GI steel tubular pole for 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 4000mm Length etc complete