PROVN OF ADDL STORE ROOM AT QM BRANCH AT AWC UNDER GE AWC MHOW.

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/loose Soil all as specified and as directed.

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out soft/loose soil all as specified and as directed.

Excavating over areas, not exceeding 1.5 m deep and getting out Soft / loose soil all as specified and as directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25 cm Soft / loose soil all as specified and as directed.

Removing excavated material to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5m above the starting point Soils all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exceeding 1.5m above the starting point Soils all as specified and as directed.

M&L Sand cushioning with dry and clean sand under floor (interlocking tiles) or in foundation, over and under ground cable in trenches, ducts for cable protecting including watering and consolidation all as specified and as directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface with material and labour. Broken stone or boulders.

M&L for Cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Material and labour RCC M-25 design mix in foundation footing, plinth beam, bases for column and pedestal using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in column, pillars, piers, post etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in beam, roof beam etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in roof slab etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in chajja etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour for RCC M-25 design mix crushing 20mm graded crushed stone aggregate) as in shelves etc, complete all as specified and directed.

Formwork to sides of concrete foundations footings bases of columns raft and raft beams sides and sofits (if any) of foundation and plinth beams, and similar work vertical or to batter rough finished sufraces of concrete complete all as specified and directed.

Formwork to sides of pillars posts, struts, piers, columns and stanchions rough finished surfaces of concrete Square rectangular or polygonal complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchibngs, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc rough finished surfaces of concrete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work including attached pilasters, buttresses etc vertical or to batter all as specified and directed.

Formwork to Chajjas, troughs and similar items including edges complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

Description same as per item No. 22.00 but 6 mm to 8 mm dia complete all as specified and directed.

Description same as per item No. 22.00 but 5 mm dia and over upto and including 8mm dia in stirrups spacers amd binders quality confirming to TMT bar complete all as specified and directed.

M&L Brickwork with fly ash bricks, modular size straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 using modular bricks complete all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete. Make:- Water Seal rom Acro Paints, Pidlite Industries Ltd, Accorproof from ACC

M & L 12 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement complete all as specified and directed.

M & L 5 mm thick rendering on brick work or concrete surface in cement mortar 1:3, on ceiling, below chajja and shelves complete all as specified and directed.

M & L for applying two coat of cement base paint over a coat of Birla or JK white cement primer including prepration of newely plastered surface complete all as specified and as directed. Make of cement base paint:- Super snowce, Duracem, Accrocem

M & L for applying two coat of oil bound distemper over a coat of primer including prepration of newely plastered surface as in wall complete all as specified and as directed. Make:- Berger, Asian Paints, Goodlass Nerolac Paints

M & L for applying three coat of white wash including prepration of surface complete on ceiling under shelves and chajja all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate in sub floors, sub base floors, laid over PCC sub base and paving etc complete all as specified and directed.

M&L for Machine cut kota stone flooring 18mm thick over and including 20 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade including mirror polishing complete all as specified and as directed.

M&L for 15 to 18 mm thick machine cut Kota stone slab on vertical surfaces such as skirting risers of step dado etc over and including 10 mm thick rendering in cement mortar 1:3 laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and granite polishing complete all as specified and directed.

M & L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, laid in alternate ways, surface finished even and fair without using extra cement complete.

S&F framed work as in doors or gates and angle joint, channel, angle or other sections with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors to be prepare for hanging or sliding with and including either and hinges or steel hanging door fittings including steel sheet for door covering, hanging door fittings and hanging also fastening and fixing incl hold fast of Fe-290 (Gde E-165) complete all as specified and as directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars/ guard bars, dovetalied or welded complete all as specified and directed.

S&F Framed work such as grills, gratings, etc, with ends of bars shouldered and / or riveted, or forged into spikes ; framed guard bars ; barred iron doors ; ladders; framed balusters; walkways ; railings ; framework of water tanks and similar work conforming to Fe-410 complete all as specified and directed.

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surface any description over 10cm width or girth, complete all as specified and as directed. Make:- Asian Paint (Apcolite), Nerolac (Nerolac Full Glass), ICI Paint (Dulux Gloss)

S&F Steel ventilator with top hung shutter including hinges steel, peg stay complete all as specified and directed.

M & L 10 mm thick rendering in CM 1:4 on concrete roof padding / wall surface, cement mortar mixed with and including WPC as per manufacturers instruction complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete.

M&L Providing precast cement concrete 1:2:4 type B-0 (12.5mm graded agg) in loures and jallies, 35mm thick (measured solid) including all moulding set in cement mortar 1:4 complete all as specified and as directed.

M & L water proofing treatment on roof surface in following steps through manufacturer / authorised applicator of the manufacturer instructions complete :- (i) Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction parapets, etc, and surface painting, with a layer of blown bitumen of any preparation applied hot @ 1.7 kg per sqm, blinded with grit or pea size gravel @ 0.006 cum per sqm and lightly tampered (area of flashing etc shall be added to the roof area) (ii) Laying APP based polymeric membrane minium weighing 3 kg/sqm and minium 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. (iii) Applying a coat of bituminius aluminium paint @200 gm /sqm (minimum ) in two coat of any newly sufaces as directed.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Description same as per item No. 46.00 but plain glass complete all as specified and as directed.

M & L 60 mm thick interlocking tiles (glossy finish) of M-35 mix laid, jointing and pointed in neat cement slurry over dry sand cushioning 30mm thick and edges shall be secured with PCC 1:2:4 type B-0 complete all as specified and as directed. Make :- Mehtab tiles/ NITCO Mumbai tiles/ Redsun tiles and pavers Panchkula as approved by GE

M&L Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed / surface conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly complete all as specified and directed for one light / fan/ bell controlled by one ,one way switch 5/6 Amps. Make :- V Marc, Polycab, Havell's, RR Kabel

Description same all as per item No 46.00 here in before but One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch

M&L for Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed / surface conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board complete complete all as specified and directed . Make :- V Marc, Polycab, Havell's, RR Kabel

Supply and fixing modular metal flush box 3 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular metal flush box 6 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular metal flush box 8 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 3 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 6 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 8 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V . Make:- Anchor , Legrand,Crabtree (Havell's)

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S & F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S&F switch socket combination modular type multipurposes 6/16 A, 3 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S & F wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 W LED fitting 4 feet long complete all as specified and directed. Make:-Havells cat part No- cat No :-LUMILINEPLUSBS 20WLED865SPCSS / WIPRO cat part No :- D532065 /Bajaj Cat part No:-112785

S & F LED street light fitting 30 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete all as specified and directed. Make:- Havells Cat No. ENDURACITYLITEPLATPLUSSL 30WLED757SASYBOPC / WIPRO cat part No :-LR02-291-XXX-57-XX / Bajaj Cat part No:-169887

Supply and fixing MCB DB, SPN, double door 8 ways, 240 volts capacity complete all as specified. Make : L&T Cat No :-DBSPN008DD HPL Cat pt No- DBECOTDD08 / Indo Asian Cat No-811806

Supply and fixing MCB DP 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T Cat No :-BB20400C HPL Cat pt No- TSPNC40 / Indo Asian Cat No-811152

Supply only MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T Cat No :-BB10320C HPL Cat pt No- TSPC6-32 / Indo Asian Cat No-811129

S&F exhaust fan AC single phase 230 volt 300 mm sweep, 900 RPM with louver complete all as specified and directed. Make:- Bajaj Model Supreme Plus Cat No.-70069 / Havells model Turbo Force SP / Usha Model Turbo Heavy Duty

Supply and fixing ceiling fan complete with electronic type regulators and accessories 230 volt, 1200 mm sweep , 50watt, 340 RPM Air delivery 210 CMM ,5 star rated complete all as specified Make:- Bajaj model speed star Cat No:- 250917, Havells model Velocity HS, Crompton model Aura Prime.

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to 32 x 6mm GI earth strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

S & laying reinforced precast concrete cable cover class LV, type 1 flat, size 250x150mmx40mm.

Supply, laying or fixing, jointing and testing LT under ground electric power cable of size 10 sqmm, 2 core. Crossed linked polyethylene (XLPE Cable ) insulated, galvanised steel strip or wire armoured, ISI -7098 Marked. With aluminium conductor multi stranded , heavy duty 1100 Volts grade complete all as specified laid in tenches / laid under floor or fixed with walls/ on poles/ in ducts/ in GI pipes etc including taking down existing complete all as directed at site. Make:- Finolex,RPG(Asian),RR Kable, Universal

M/s Gupta Constructions

M/S UnitedConstruction