Repair and Maintenance of Dispensary /Hospital at Ithai Colony.

Amount

Dismantling sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable material and disposal of unserviceable material within 50m lead. 13.27.1 G.I sheet roofing.

Demolition above GL upto floor two level including disposal of unserviceable materials within 50m lead.13.2.6 unreinforced cement concrete upto 15cm thickness.

Dismantling old plaster or skirting raking out & cleaning the surface for re-plaster i/c disposal of rubbish within 50metres.

6mm cement plaster 1:4 (1cement: 4 fine sand).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622 of approved make in all colours and shade in laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) i/c grouting the joints with white cement and matching pigments etc. complete .9.31.1 size of tile 300x300mm (single charged) 9.31.3.1 Non branded.

Providing and laying rectified (Non-skid) Gazed Ceramic floor Tiles 300x300mm or more (thickness to be specified by manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red, Brown, laid on 20mm thick Cement Mortar 1:4 (1 Cement: 4 Coarse sand) including pointing the joints with cement and matching pigments etc. complete.

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622 of approved make, in all colours and shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1cement:3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of tile 300x300mm (singled charged) Non- branded.

Removing white or colour wash by scrapping sand paper and preparing surface smooth i/c necessary repair to scratches etc. complete

Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepared the surface even and smooth complete.

Painting on wall with (two coats) of Dulux Acrylic emulsion (Supreme 3in1) paint or equivalent of approved quality in all shades on new work to give an even shade.

Finishing walls weather shield paint of approved quality on new work (three or more coats) to give even shade.

Providing & laying six course water proofing treatment with bitumen felt over roofs consisting of first, third & fifth course of blown or/and residual bitumen applied hot at 13.61 kg, 11.34 kg & 15.88kg per 9.29 sqm of area respectively, second & fourth courses of roofing felt type 3 grade 1 hessian base self finished bitumen felt & sixth & final course of stone grit 6 mm & down size or pea size gravel spread at 0.06 cum per 9.29 sqm i/c preparation of the surface etc. complete.

Repairing of plaster i/c cutting & the patch in proper shape & preparing the surface of the wall complete 12.1.1 with cement mortar 1:4 (1 cement :4 fine sand)

Neat cement punning.

Providing wood work in frames of doors, windows, clerestory window and other frames, wrought framed and fixed in position.7.1.2 local best quality Uningthou.

P/F 35 mm thick panelled, glazed or panelled and glazed shutter for doors, windows and clerestory windows i/c bright finished or black enamelled M.S Iron but hinges with necessary screws. 7.8.2 Uningthou Wood.

Aluminium glazed windows and ventilators of standard aluminium extrusion joint mitre and riveted/ screwed with 15x3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 (1 cement: 3coars sand: 6 stone aggregate 20 mm nominal size) or wooden plunges and screws 20 mm nominal size) or wooden plunges and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of glass panes 4mm thick, projecting hinge, handles, peg stays, bolting devices, locking arrangements, spring catch & aluminium clip beading tec. as required complete. Readymade aluminium ventilators (side hung)

Painting (two or more coats) with synthetic enamel paint of approved quality of black or chocolate colour on wood work to give an even shade.

Providing & fixing Aluminium handles with necessary screws etc. complete. 100mm

Providing & fixing Aluminium Tower bolts (barrel type) with screws etc. complete. 150x10mm

Providing & fixing Aluminium Sliding bolts (barrel type) with screws etc. complete. 250x16mm

Providing and fixing white vitreous china pedestal type water closet ( European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device ( handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. WC pan with ISI marked white solid plastic seat and lid.

Providing and fixing P.V.C. waste pipe for sink or basin including P.V.C. Waste fittings complete. Flexible pipe, 32mm dia

Providing and fixing wash basin with C.I. brackets, 15mm dia CP Brass single hole basin mixture of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 500x400mm with a 15mm CP Brass single hole basin mixer.

Providing and fixing 600x20mm C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type).fixed to wooden cleats with C.P. brass screws.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 453x357mm.

Providing and fixing UPVC soil, waste , rain water and vent pipes including all requisite fitting of pipes & fitting with solvent cement, trenching, refilling & testing of joints as per direction of Engineer in charge. 110mm dia.

Providing and fixing grating of approved quality for Nahni trap 24.29.1.1 100mm nominal diameter

Providing and fixing CP brass bib cock of approved quality conforming to IS: 8931 25.19.1 15mm nominal bore.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 stone aggregate 20mm nominal size) i.c finishing the top surface of concrete smooth.

Providing and laying cement concrete in foundation and plinth. (2.1.3) 1:2:4 (1 cement: 2coares sand: 4 graded stone aggregate 20mm nominal size).

2nd class (local 1st class) brick work in foundation and plinth in cement mortar 1:4 (1 cement:4 coarse sand)

12mm cement plaster 1:4 (1 cement 4 fine sand) (11.2)

Add EPF 3.25

Add CESS 1%

Add GST @ 18% GST

M/s KONTHOUJAM VIKASH SINGH

M/S P. MATHEW