Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.1 LAccepted-AOC B 86 GREEN PARK CHIPYINA NEAR JAAT CHOWK GAUTAM BUDH NAGAR 201009 | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201009 | L1 | Accepted-AOC The quoted amount of L1 bidder is found competitive and reasonable overall, hence accepted | |
| 2 | L2₹44.7 L+₹5.7 L (14.6%)Rejected-AOC 2 RC ENTERPRISES NEAR AGRASEN BHAWAN BHATAPARA CHHATTISGARH LINK ROAD BALODA BAZAR RAIPUR CHHATTISGARH 493118 | BALODA BAZAR | CHHATTISGARH | 493118 | L2 | Rejected-AOC Being not the lowest bidder | |
| 3 | L3₹45.1 L+₹6.0 L (15.5%)Rejected-AOC | L3 | Rejected-AOC Being not the lowest bidder | |
| 4 | L4₹45.4 L+₹6.4 L (16.4%)Rejected-AOC | L4 | Rejected-AOC Being not the lowest bidder | |
| 5 | L5₹45.8 L+₹6.8 L (17.3%)Rejected-AOC | L5 | Rejected-AOC Being not the lowest bidder |
| Sl No | Description | Qty | Unit | rc enterprises L2 | EVEREST ENGINEERING WORKS L6 | PRAGYA GREENTECH L1 | Global Safety Engineering and Management Solutions L7 | AM BUILDERS L5 | M/s Bakiyalakshmi Enterprises L4 | M/S.RANGA AND CO L3 | RK ENTERPRISES L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches n.exc 1.5M wide and n.exc 1.5M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level complete all as specified and as directed.
Note:- (a) Manual excavation will only be allowed where existing UG cables/ water pipe lines one met with while excavation work unit crossing manual excavation only will be allowed.
(b) Rate quoted is deemed to inclusive of the above manual excavation. | 101 | Cum | 370 ₹37,370 | 280 ₹28,280 | 250 ₹25,250 Lowest | 400 ₹40,400 | 396 ₹39,996 | 395 ₹39,895 | 392 ₹39,592 | 360 ₹36,360 |
| 2.00 | Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25Cm thick in soft/ loose soil complete all as specified and as directed. | 71 | Cum | 180 ₹12,780 | 220 ₹15,620 | 100 ₹7,100 Lowest | 380 ₹26,980 | 270 ₹19,170 | 330 ₹23,430 | 266 ₹18,886 | 300 ₹21,300 |
| 3.00 | Removing excavated material (Soils) from site to a distance not exc 50M away and depositing where directed at a level not exc 1.5mtr above the starting point complete all as specified and as directed. | 30 | Cum | 350 ₹10,500 | 280 ₹8,400 | 130 ₹3,900 Lowest | 280 ₹8,400 | 369 ₹11,070 | 350 ₹10,500 | 365 ₹10,950 | 290 ₹8,700 |
| 4.00 | Boring holes under road pavement by bookey manually in any type of soil upto 200mm bore complete all as specified and as directed. | 150 | RM | 1,000 ₹1,50,000 | 950 ₹1,42,500 | 1,050 ₹1,57,500 | 2,000 ₹3,00,000 | 810 ₹1,21,500 | 1,500 ₹2,25,000 | 806 ₹1,20,900 Lowest | 1,600 ₹2,40,000 |
| 5.00Supplying, laying, jointing, testing and commissioning of DI Pipe as per IS 8329/2000 ISI marked, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches and necessary suitable for tyton joint (rubber gasket joint) including taking down old unserviceable pipe line of any type complete all as specified and as directed at site for the following sizes:- Note:- Earth work and Joints shall be measured and paid separately. | |||||||||||
| 5.01 | 80 mm bore | 300 | RM | 1,814 ₹5,44,200 | 1,310 ₹3,93,000 | 1,300 ₹3,90,000 Lowest | 1,336 ₹4,00,800 | 1,782 ₹5,34,600 | 1,350 ₹4,05,000 | 1,776 ₹5,32,800 | 1,530 ₹4,59,000 |
| 5.02 | 100 mm bore | 450 | RM | 1,822 ₹8,19,900 | 1,685 ₹7,58,250 | 1,350 ₹6,07,500 Lowest | 1,718 ₹7,73,100 | 1,782 ₹8,01,900 | 1,595 ₹7,17,750 | 1,776 ₹7,99,200 | 1,864 ₹8,38,800 |
| 5.03 | 150 mm bore | 45 | RM | 3,207 ₹1,44,315 | 2,187 ₹98,415 | 2,100 ₹94,500 | 2,230 ₹1,00,350 | 3,249 ₹1,46,205 | 1,836 ₹82,620 Lowest | 3,254 ₹1,46,430 | 2,290 ₹1,03,050 |
| 5.04 | 200 mm bore | 30 | RM | 4,213 ₹1,26,390 | 2,956 ₹88,680 | 2,800 ₹84,000 | 3,015 ₹90,450 | 4,266 ₹1,27,980 | 2,600 ₹78,000 Lowest | 4,262 ₹1,27,860 | 2,846 ₹85,380 |
| 6.00M & L for CI fittings/ specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 1538-1993 complete all as specified and as directed. | |||||||||||
Tender Value
₹41.1 L
EMD Value
₹82,140
Closing Date
17 Dec 2025, 6:00 pmClosed
Garrison Engineer, St.Thomas Mount, Chennai
Garrison Engineer, St.Thomas Mount, Old MH Complex, Rudra Road, Chennai-600 016
SPECIAL REPAIR/ REPLACEMENT OF WATER SUPPLY PIPE LINE AND ALLIED WORKS AT OTA CHENNAI UNDER GE STM
2025_MES_741497_1
8217/E8
Open Tender
Construction Works
Item Rate
180 days
Garrison Engineer, St.Thomas Mount
All as Per NIT
6 documents required · 6 mandatory
₹500
Yes
Garrison Engineer, St.Thomas Mount
₹82,140
Yes
12 Feb 2026
26 Nov 2025
24 Dec 2025
26 Nov 2025
17 Dec 2025
10 Dec 2025
26 Nov 2025 - 3 Dec 2025
Amount
Excavation in trenches n.exc 1.5M wide and n.exc 1.5M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level complete all as specified and as directed. Note:- (a) Manual excavation will only be allowed where existing UG cables/ water pipe lines one met with while excavation work unit crossing manual excavation only will be allowed. (b) Rate quoted is deemed to inclusive of the above manual excavation.
Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25Cm thick in soft/ loose soil complete all as specified and as directed.
Removing excavated material (Soils) from site to a distance not exc 50M away and depositing where directed at a level not exc 1.5mtr above the starting point complete all as specified and as directed.
Boring holes under road pavement by bookey manually in any type of soil upto 200mm bore complete all as specified and as directed.
Supplying, laying, jointing, testing and commissioning of DI Pipe as per IS 8329/2000 ISI marked, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches and necessary suitable for tyton joint (rubber gasket joint) including taking down old unserviceable pipe line of any type complete all as specified and as directed at site for the following sizes:- Note:- Earth work and Joints shall be measured and paid separately.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
M & L for CI fittings/ specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 1538-1993 complete all as specified and as directed.
Upto 100 mm bore
150 to 200 mm bore
M & L for DI fittings/ specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 9523 complete all as specified and as directed.
Upto 100 mm bore
150 to 200 mm bore
M & L for Run lead joint including jointing material for CI/ DI pipe of following size/ bore complete all as specified and as directed:-
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Supply, laying, jointing, welding & testing MS Pipe (Heavy duty class 'C') 6mm thick laid in trenches or on floors for connections to centrifugal pump sets for suction, pump to header and to connect out going water main CI/DI/MS pipe line including taking down old unserviceable MS pipe any size complete all as specified and as directed. Note:- MS Flanges and Flange joints complete with jointing materials shall be measured and paid separately.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
S & F, MS flanges of following sizes not less than 16mm thick duly welded on ends of MS pipe complete all as specified and as directed.
50 mm bore
80 mm bore
100 mm bore
150 mm bore
200 mm bore
M & L for Flanged Joints with rubber or fibre board gasket including nuts, bolts and double washers of following sizes complete all as specified and as directed.
50 mm bore
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
Supply, fixing, jointing & testing Cast Iron sluice valve of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unserviceable sluice valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
50 mm bore
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
Supply, fixing, jointing and testing of Cast iron Non Return valve without by pass arrangement, swing type, confirming to IS: 5312, flanged ends pressure rating PN 1.0 complete including taking out unserviceable NRV complete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
50 mm bore
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
S & F CI foot valve flanged ends, swing type operation with rubber sheet, as per IS:4038 including taking out unserviceable foot valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
50 mm bore
80 mm bore
100 mm bore
Supply, installation and testing of flanged ends water meter ISI marked woltman type, Class 'B' of following sizes and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/ inclined/ vertical position, including taking out unserviceable water meter complete all as specified and as directed:- Note:- Flange joints including jointing materials shall deemed to be included in the unit rate of this item.
50 mm bore
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
S & F gun metal gate valves with iron wheel head, screwed both ends for iron pipe, ISI Marked, as per IS: 778 of following sizes including taking out unserviceable gate valves complete all as specified and as directed.
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
Labour for cutting, welding of CI/ DI/ GI/ MS pipe in position for reducing to required length for insertion of new tees, branches, butterfly valve (wafer type) etc. of upto 200mm bore complete all as specified and as directed.
M & L for fixing of water pressure gauge (0-5 Kg/cm square) 100mm dial size including boring, threading, welding in CI/DI/GI/MS of any sizes and connected with suitable size of U type MS/CP pipe with ON OFF cock complete all as specified and as directed.
M & L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation of brick pillar to support the pipe line including demolition of old PCC and removing the debris from site complete all as specified and as directed.
M & L for Brick work with sub class 'B' bricks straight or curved on plan exc. 6M mean radius built in CM (1:4) as in brick pillar of required size and shape to support the pipe line including demolition of old brickwork & removing from site complete all as specified and as directed.
M & L for rendering 10mm thick with cement mortar (1:6) on fair faces of brick work/ concrete surfaces, finished the surface even and fair complete all as specified and as directed.
M & L for GI tubing 'medium grade' with all accessories including bends, elbow, socket and including taking down old unserviceable GI pipe complete all as specified and as directed.
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
Supply, installation and testing flanged ends strainer/dirt box of following sizes with stainless steel mesh suitable for cold water meter to avoid foreign material entering into meter and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/ inclined/ vertical position, including taking out unserviceable strainer/ dirt box complete all as specified and as directed:- Note:- Flange joints including jointing materials shall deemed to be included in the unit rate of this item.
50 mm bore
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Supply, fixing, jointing & testing butterfly valve (wafer type) of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, inserting new one complete all as specified and as directed:-
80 mm bore
100 mm bore
150 mm bore
200 mm bore
S & F Cast Iron Air Valves with two air outlets, conforming to IS: 14845 of size 200mm dia bore and fixing up in Cast Iron/ Ductile Iron water supply mains of size 200mm dia in and including necessary fittings and taking down old any one complete all as specified and as directed.
S & F in repair sprinkler irrigation system 360 degree, typically operate at pressures ranging from 30 to 50 PSI (pounds per square inch) designed to throw water 50-90 feet at a flow rate of 18-45 gallons per minute complete all as specified and as directed.
S & F UPVC pipe of size 50mm dia bore with all accessories including bends, elbow, socket and including taking down old unserviceable CPVC pipe complete all as specified and as directed.
S & F Cast Iron Air Valves with two air outlets, conforming to IS:14845 of size 150mm dia bore and fixing up in Cast Iron/ Ductile Iron water supply mains of size 150mm dia in and including necessary fittings and taking down old any one complete all as specified and as directed.
Supply only PTMT float valve with epoxy coated aluminium rod and high density plastic ball of following sizes including taking down old unserviceable float valve complete all as specified and as directed:-
15mm bore
20 mm bore
25 mm bore
40 mm bore
Supply only 15mm bore Bib tap standard of PTMT any colour high pressure screwed for male/ female treaded, for UPVC pipe/GI pipe of size 15mm bore complete all as specified and as directed.
rc enterprises (BID ID -3500245)
M/S.RANGA AND CO (BID ID -3500283)
M/s Bakiyalakshmi Enterprises (BID ID -3500059)
AM BUILDERS (BID ID -3500669)
EVEREST ENGINEERING WORKS (BID ID -3500629)
Global Safety Engineering and Management Solutions (BID ID -3500249)
RK ENTERPRISES (BID ID -3500162)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.10 MB
BOQ_830291.xls
BOQ • 0.34 MB
TenderDocuments-8217.pdf
Tender Documents • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .