SPECIAL REPAIR TO BLDG NO. P-525 OF SWC PRO UNIT IN ZONE-I AND IN BLDG P-2 OF MH IN ZONE-II AREA UNDER JAIPUR MIL STN

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 for raising of height of drain, manhole / wall complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20mm screed bed in CM 1:6 complete all as directed.

M&L glazed coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in vertical surfaces such as skirtings and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl backing coat 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

M&L for coloured Ceramic tiles 9-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set over 15mm thick screed in CM 1:6 jointed in neat cement slurry and pointed in white or coloured cement to match, light shade complete all as directed.

M&L for Ceramic tiles 9-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,on vertical surfaces such as skirting, dados and risers to steps ,wall etc set over 10 mm thick cement plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match colour of the tile complete all as directed.

M&L for Non skid coloured joint free ceramic tiles 7mm to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

M&L glazed tiles digital coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match incl backing coat 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.complete all as specified and directed.

Taking down door chowkaht or frame of any description area n.exc 1.50 Sqm each without taking off shutters from the frame.

Taking down door chowkaht or frame of any description area exc 1.50 Sqm but n exc 4 Sqm each without taking off shutters from the frame.

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S & F mild steel framed work as in door frame of angle or other section and fixed with angle cleats and connecting plates etc of Gde E-165 (Fe-290) Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003.

S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as directed

S&F sheet glass, 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as directed

S&F sheet in repairs glass frosted, 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as directed

S&F 300mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc.

S & F 150mm long aluminium handles, cast type anodised complete

S & F 125mm long aluminium handles, cast type anodised complete

S & F 200mm long Aluminium barrel tower bolt stove enamelled black with bright bolt and fixed complete

S & F 125mm long Aluminium barrel tower bolt stove enamelled black with bright bolt and fixed complete

S & F 100mm stainless steel butt hinges medium weight cold rolled stainless steel and fixed complete

S & F 75mm stainless steel butt hinges medium weight cold rolled stainless steel and fixed complete

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm and fixed with stainless steel wire staples

Taking down cement plaster or cement lime plaster any descrption on stone surface/ brick surfaces of wall or ceiling including raking outs joint hacking for key scrubbing down with water etc

M & L rendering 15 mm thick on stone masonry or other than fair faces of brick surfaces in CM (1:6) finished even and smooth with out using extra cement

M & L rendering 15mm thick on stone masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement.

M & L rendering 10mm thick on concrete surfaces on ceiling in CM 1:3 finished even and smooth without using extra cement.

S&F Rendering 10mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth without using extra cement as on ceiling surface including chicken wire mess fixed with old rusted TMT bars etc. as per directed.

S&F for Rendering 15mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:6, even and smooth without using extra cement.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 .

M&L for complete removal of existing treatment of old plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted and incl 1 to 2mm thick wall care putty complete all as specified and as directed by Engineer-in-Charge.

M&L Complete removal of existing treatment of walls and applying two coat of cement base paint (Ist quality) in plain pattern on walls and over a coat of alkali resistant priming paint complete all as specified.

M&L for preparing old plastered ceiling surfaces and applying three coat of white wash complete all as specified

M&L for preparing new plastered and applying two coats of oil bound distemper over a coat of primer over 1 to 2mm thick wall care putty in two layer applied including rubbing with suiatable sand paper complete all as specified.

M&L for preparing new plastered surfaces of walls and applying two coat of cement based paint complete all as specified

M & L Preparing new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint all as specified and as directed.

M & L Preparing new plastered or unplastered surfaces and applying two coats of cement base paint including a coat of primer on wall surfaces all as specified and as directed.

M & L Preparing new plastered surfaces and applying three coats of white wash on ceiling

M&L preparing new steel surfaces of any description exc 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome complete all as directed.

M&L preparing old steel surfaces of any description exc 10 cm width or grith and applying two coats of synthetic enamel paint .

M&L for preparing old steel surfaces of any description not otherwise described over 10cm in width or girth and applyingapplying one coats of synthetic enamel paint complete all as specified

M&L preparing new wooden surfaces of any description exc 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer

Preparation of old wooden or wood based surfaces of any description, over 10cm width or girth and applying a coats of synthetic enamel paint complete all as specified and directed.

M&L preparing old wooden surfaces of any description exc 10 cm width or grith and applying two coats of synthetic enamel paint .

Taking up or down steel tubing and connection including cleaning 15 mm bore

S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor.

S & F in repair GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down complete all as specified

S&F in repair 15 mm bore bib tap fancy type chromium plated cast copper alloy with cruth or butter fly handle screwed down for iron pipeand fixed complete.

S&F in repairs PVC valveless, syphonic action type flushing cistern low level 10 ltr capacity white, with intel, ball valve, float and handle including brakects flushing, brakects flushing pipe complete all as specified & directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm.

S &F in repairs Wash hand basin, flat back 550x400mm vitreous china (white) including chromium plated waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, 65mm long & making good disturbed surfaces to match with the existing complete all as specified.

S&F in repair Pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15 mm fancy type

S&F in repairs vitreous china, size 580 x440 mm, white pedestal pattern (EWC) white in colour with and including plastic seat cover white closed pattern with flat bottom and cover and MS chromium plated hanging device including connecton to uotgoing pipe complete all as specified and directed, with integral foot rests (excluding flushing cistern), complete all as specified.

S&F in repair stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15 mm bore or union and fixed

S&F in repair angle stop valve cast copper alloy chromium plated screwed for iron pipe 15 mm bore

S&F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union,125mm size, complete all as directed. Make Jaquar of series queens, PARRYWARE, HINDWARE or equivalent as approved by GE

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe 25mm dia and fixed (Minimum Weight 210 gms)

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specificallly provided complete all as specified and directed.

M&L for providing cement concrete (1:5:10), type E-2, using 40mm graded stone aggregate as in sunken portion of WC/toilet/bath complete all as specified and directed.

M&L for rendering 10mm thick, in cement mortar (1:3) on concrete /brick work of sunken portion, mixed with Dr Fixit pidiproof LW+ @ 200ml/ 50Kg of cement or quivalent make as approved by GE complete all as specified and directed.

M&L for applying two coats of flexible polymer acrylic water proofing coating, 1mm thick (Dry film in two coats) using Dr Fixit pidifin 2K of M/S Pidilite Industries or equivalent as approved by GE including necessary pond testing in sunken portion complete all as specified and directed.

Taking down PVC pipes, rain water pipes, including all fittings like shoes, bends, swan necks etc of any dia all as specified and directed.

S&F 110 mm dia bore PVC (SWR) pipe, single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floors dia of pipe 100 mm fixed in repair

S&F PVC 75mm dia (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75 mm bore.

M & L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F PVC (SWR) branch piece, single (single Y) equal or unequal for 75mm dia bore incl jointing material complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal for 110mm dia bore incl jointing material complete all as specified and directed.

S&F PVC (SWR) vent cowl equal or unequal for 110mm dia bore complete all as specified and directed.

S&F PVC cowls 75 mm

S&F PVC(SWR) 75 mm bore juction single T equal or unequal with access door

S&F in repair PVC (SWR) Bends 110mm bore, with oval access doors

S&F in repair PVC (SWR) Bends 75 mm bore, with oval access doors

S&F PVC (SWR) bends any radius 75 mm bore

S&F PVC(SWR) 110 mm bore reducers

Disconnecting & dismanteling existing tank of capacity exc 250 Lt and not exc 500lt and removed from site .

S&F Rotatinal moulded polyethylene water storage tanks double layed (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I capacity 500 ltr

S&F in repair Water storage tanks 1000 litres capacity, rotational moulded, double layer polythene (cylindrical vertical with closed top) hoisting and fixed in position on roofs complete all as specified.

S&F in repair Brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges

M&L for Hard core with broken stone of gauge n.exc. 63mm deposited spread and levelled in layers n.exc.15cm thick

M & L 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as plinth protection finishing even and smooth without using extra cement

S&F mild steel TMT bars 6 to 8 mm dia and over cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia

M&L precast reinforced cement concrete slab type B1, 1:2:4 ( 20mm graded aggregate ) as in landing, drain cover slab (for manholes etc), chajjas, drain cover and shelves and similar articles with plain faces .

Taking down existing treatment complete including PCC and properly clean the surface to remove loose particles with wire brushes and removing the debris out side of MoD Land complete all as specified and directed by Engr-In-Charge

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean drysand 1:1 (by weight).

M&L for screed plaster 15 mm thick in CM 1:4 on roof surface complete and finished the surface even and smooth without using extra cement incl etc. complete all as specified and directed

M&L 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5mm size graded stone aggregates) average as in RCC roof surface to horizontal and vertical surfaces , finish the surfaces even and smooth using extra cement including necessary form work all as specified and directed.

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS: 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions. and finally applying one coat of bitumen @ 1.2 kg/sqm on APP membrane including two coats of aluminium paint complete all as specified and directed

Supply only liquid water proofing compound

Providing and fixing suspended false ceiling (make Armstong ORCAL or equivalenet as approved by GE) extra microperforation size of 600 x 600 x 12 mm Ceiling Tiles over suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) SILHOUETTE X L 15 MM (NOMINAL) including necessary hanging system arrangement which is required to be made from existing RCC roof /stone /slab /ac sheet of existing ceiling complete all as specified and directed.

S&F Pre laminated Flush shutters 35mm thick laminated on both side with mica solid core construction, with block board core colour and design all as specified and directed.

M& L for Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed 200 mm

M& L for Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm

M& L for Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm

M& L for Mild steel pressed handles, oval type,stove enamelled black 150mm

Supply & fix 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Supply & fix mild steel 300 mm, ordinary rat tail rod pattern springs, including roler and roller plate complete all as specified and directed.

Supply & fix 150 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed.

S&F powder coated any colour (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors/windows/ ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F powder coated any colour (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed / sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing,locks, anodised alumnium snap beading, screws etc. complete all as specified

M&L for 4.0 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side complete all as specified and directed.

Supply and fix 15 micron coloured aluminium anodised grill design No DG-117,10 mm thick including F Sections complete all as specified and directed. Make :- M/s Deco grill / M/s Royal grill or Equivalent

S&F aluminium (extruded section) body door closer hydraulically regulated designation No 3, universal type,suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg complete all as specified and directed.

S&F powder coated any colour (minimum thickness of powder coating 50 micron) anodised aluminium door shutter, aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handle 2 Nos in doors, hinges, anodised aluminium snap beading etc complete all as specified and as directed.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed with aluminium wire staples

M&L 12 mm thick MDF Board both side choice lamination fixed in aluminium doors/partition

Dismantling CGI/asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete.

M&L for pre-painted galvatume aluminium zinc coating Gi based corrugated steel sheet 0.5mm thik of an colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/J hook,L-type crancked hook as specified

Supply & fix in repairs stainless steel curtain rod powder coated with fixing side brackets, end cups, and fixed with PVC rawl plugs & steel screws complete all as specified and directed.

Supply & Fix in repair water closet vitreous China squatting pan, 'Orissa patteren, size 580 x 440 mm white, with integral footrests including trap but (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S & F in repair PVC grating doom 125 mm dia with waste hole of PTMT (Min Weight 40 gms)

S&F in repairs fancy type CP Health faucet 15 mm bore (ISI marked) including extension Pipe of 1 Mtr Long Make -CERA Cat Part No CG 105A or equivalent as approved by GE

S&F in repairs corner glass shelf large 300mm x 300mm complete all as specified. Make - CERA Cat Part No CA 503 or equivalent as approved by GE

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced complete all as specified and directed.

Supply & fix as in repairs of 15mm bore cast copper alloy CP stop cock /angle cock fancy type screwed down with iron pipe or for union fixed complete .Make Jaquar of series queens, PARRYWARE, HINDWARE or equivalent as approved by GE

Supply & fix in repairs CP brass mixer 15mm bore hot & cold marked complete with nipple and arms complete all as specified. Make Jaquar of series queens, PARRYWARE, HINDWARE or equivalent as approved by GE

Supply & fix as in repairs 15mm bore cast copper alloy CP stop valves chromium plated with long shank and cup fancy type (concealed type) screwed down with iron pipe or for union fixed complete. Make Jaquar of series queens ,PARRYWARE, HINDWARE, or equivalent as approved by GE

Supply & fix 32mm bore waste coupling of PTMT (half or full) threaded ( Min wt 32mm-45 gms)

Taking down existing aluminium door of any size and refixing in same opening after easing and changing necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beading and screw complete all as per specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed in any mortar

M&L 75mm thick cement concrete type D-2, 1:4:8 all as directed.

M&L 25mm thick sand layer

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick,tiles 20cm x 20cm x 25mm thick, tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment

S&F Mortice lock, vertical type, size 100 mm brass 4 lever

M&L for repairing to RCC chajja of doors/windows with PCC (1:2:4) type B1 or cement mortar 1:3 as directed by Engineer in charge

S&F soap tray chromium plated complete all as specified & as directed. Make - CERA Cat Part No F5007106 or equivalent as approved by GE

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St-240.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

M&L for cleaning of complete building such as floor, all spots on door, window and wall and floor tile of bldg, bath room, toilet and stair case area using floor disinfectant cleaner & stain remover after distempering, and laying out of furniture properly befor handing over the bldg to the user all as specified and directed by Engineer In Charge.

Taking down carefully surface aluminum or copper point wiring including exisitng PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into & including concealed conduit and terminated in modular metal flush boxes 1.0mm thick for mounting switches, sockets, fan regulators with 3.0 mm thick laminated sheet as required for one light point controlled by one switch.

All as per item No. 141 here-in-before but one fan point controlled by one switch.

All as per item No. 141 here-in-before but one socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per item No. 141 here-in-before but one socket outlet 6 amp controlled by one switch on indepdendent board.

All as per item No. 141 here-in-before but One bell point controlled by one bell push.

All as per item No. 141 here-in-before but One light point controlled by two, two way switches.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes not less than 1.0 mm thick and white modular mounting plates with frame for mounting modular switches, sockets as required for 3 pin 16 amps socket outlet point controlled by one switch.

S&F switch piano flush button single pole one way 6 Amp complete.

S&F switch piano flush button single pole one way 6 Amp complete.

S&F switch piano flush button single pole one way 16 Amp complete.

S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type compete.

S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type compete.

S&F hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete.

S&F ceiling rose 3 plates polycarbonate body complete.

Supplying and fixing in repairs LED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt (including driver) having colour temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make - Philips cat ref no. ENDURALED BATTEN "BN 308C LED 20S PSU CDL WH" or Bajaj cat ref no. BLTRU 20W WH VIVA or equivalent in other specified make as approved.

S&F in repair LED batten (0.6M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 1000 lumens at a minimum system efficacy of 100 lumen per watt and total power consumption not more than 10 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete

Supplying and fixing LED bulkhead fitting 9 watt IP 66 & IK 09 with polycarbonate body duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable all as per Philips cat ref no. WT202W LED6S CW PSU S2 PC or equivalent in other specified make as approved.

Supplying and fixing greenline high efficiency LED light luminaire 35 watt complete with drive, pressure die cast aluminium housing, UV stablized polycarbonates cover, in built power unit, IP 65 protection including mounting bracket made of 25 mm GI pipe, medium grade ISI marked not less then 1.2 m bend in shape with two number clamps, nuts, bolts, washeres as required.

M&L for earthing with galvanized steel earth plate electrode 600mmx 600mmx6mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with the top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth Wire 4.0 mm dia , by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No. 03 of SSR Part -I connected to earthing point , PCC pit in mix 1:3:6 type C1 with PCC 1:2:4 type B-1, 40mm thick cover, watering arrangement with funnel and wire mesh and 20mm bore medium grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earh work including testing on completion.

Taking down MCB distribution boards with incoming and out going controls ,any make, any size

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 4 ways.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with TPN , 415 volts, 8 ways.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:- (a) SPN, 240 volts, 8 ways. Make - Legrand cat ref no 507610 or equivalent as approved by GE

S&F MCB distribution board, tripple pole and neutral (VTPN) powder coated CRCA steel sheet suitable for MCCB incomer upto 160 amp, 4 way, 415 volts, degree of protection IP 43 - IK- 09 with reversible double door, recess mounted, having 250 amp insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. Make- Legrand cat ref no 507745 or equivalent in Schneider or Hager as approved. Note for MCBs & MCB DBs:- MCCBs, MCBs & MCB DBs shall be of the same make.

S & F MCBs of 'C' series having breaking capacity 10 KA ISI marked including required wiring connection with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 Amps

S & F MCBs of 'C' series having breaking capacity 10 KA ISI marked including required wiring connection with copper lugs of suitable size provided in MCB DBs of Double pole 10 to 32 Amps

S & F MCBs of 'C' series having breaking capacity 10 KA ISI marked including required wiring connection with copper lugs of suitable size provided in MCB DBs of Double pole 40 to 63 Amps

S & F MCBs of 'C' series having breaking capacity 10 KA ISI marked including required wiring connection with copper lugs of suitable size provided in MCB DBs of Four pole 40 to 63 amp. Make - Legrand cat ref no 408700 to 408702 or equivalent as approved by GE

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Complete including writing MES No. on fan body complete all as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in hard and dense soil

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point.

M&L for Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm

Dismantling and taking out UG cable any size unserviceable items fixed in any position and removal from site, all as directed.

S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size16 sqmm nominal cross section 4.0 core laid in trenches,fixed to pole or passing through pipes including all necessary clamps,nuts, bolts washers complete all as specified and directed.

S & F 20 amps single pole and neutral socket outlet with 2 pole and earty metal enclosed plug top in poweder coated CRCA steel sheet enclosre recess mounted with chained matel cover for socket out let with and incl one no single pole MCB 20 Amps .

M&L for clamp and back plates fabricated from steel sections conforming to Gde Fe 410-O or Fe 310-O including nuts, bolts, washer, drilling holes for bolts in any shape or size for fixing ceiling fan complete.

Taking down fan /E /fan, sealing cable end, dismantling blades Note : removing fan and blades to AGE EM store

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:- 2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit.

All as per item No 183 above but 4x16 sqmm + 2x16 sqmm earth wire in 25 mm dia conduit for each wire.

S&F modular switch one way 6 amp 1 module all as per Legrand Mylinc cat ref no. 675501 or equivalent as approved by GE

S&F modular switch one way 16 amp 1 module all as per Legrand Mylinc cat ref no. 675511 or equivalent as approved by GE

S&F modular bell push, 6 amp, 1 module all as per Legrand Mylinc cat ref no. 675504 or equivalent as approved by GE

S&F door bell, AC, 240 volts, single pole complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F modular socket 6/16 - 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no. 675555 or equivalent as approved by GE

S&F modular socket 6 amp 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no. 675550 or equivalent as approved by GE

S&F modular switch two way 6 amp 1 module

S&F modular hum free electronic step fan regulator, 100 watt 2 module all as per Legrand cat ref no. 675530 or equivalent as approved by GE

S&F angle holder, insulated polycarbonate body with back plate complete.

S & F ventilation fan PVC body sweep 250 mm heavy duty motor, double ball bearings with protective steel bird guard.

M& L for taking out ceiling fan 1200mm sweep 50 Hz AC 230 votls, and re-fixing at new location including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling as required.

S&F 20 amp, single pole and neutral, socket outlet, with 2 pole and earth, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 16 amp as required. Make - Legrand cat ref no 607841 & 408592 or equivalent as approved by GE

S&f heavy duty stainless steel connection pipe hot and cold premiun quality 304 grade stainless steel alongwith copper inner joint,EPM tube & brass nuts along with double ring sealing washer to prevent leake connection 450 mm long 15 mm dia

S&F water heater 25 litre capacity BEE star rating 5 in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25° C to 75° C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insullation complete. Make- Hevells Adonia or equivalent as approved by GE

S&F Steel tubes ISI marked light grade galvanised with all fittings fixed to walls / poles / laid in road crossing etc as required of 40 mm bore

Schedule of Credit

M/S MAYANK ASSOCIATE

M/s Radhey Enterprises

UNIVERSAL INFRAPROJECT PVT LTD

JAGDAMBA CONSTRUCTION COMPANY

R.S BUILDERS