Const. of pipe drain incl. M/Holes at Molvi Stop lal bazar near H/o Bashir Ahmad by way of installation, testing and commissioning of Departmentally available self-priming type, horizontal shaft disposition pump complete with other allied accessori

Installation, Testing & Commissioning of Departmentally available self-priming type, horizontal shaft disposition pump (20LPS) capacity coupled to single phase AC induction motor on a common base frame complete unit comprising of electric gadgets, switch gears, power conductor etc. housed in a canopy. The job includes shifting of the unit from Divisional stores/Palpora to site of installation. All the tools & tackles required for the execution of the above job are to be arranged and brought to site by the contracting agency. Testing of the complete pumping machinery on load is included in the job.

i. Excavation of trench of 2’x 5´x0.5’ (LxBxD) size in hard & soft soil at the site of installation of pumping unit for laying of foundation . ii. Excavation of 15x0.30Mx0.30M (LxBxD) size trench in macadamized lane and 70M x.03x.03 non-macadamized for laying of below-mentioned pipe (100mm Dia.). The job includes refilling the trench & dressing as well as ramming the same after laying of pipe. The job further includes dumping extra excavated material at a proper dumping site.

i. Providing and laying of 2’x 5’x 1’ (LxBxH) size concrete block in 1:2:4; cement, sand and gravel mix over the trench mentioned at item#2i, after laying of stone soling for 0.5' depth. ii. Providing and laying of concrete block over the embedded pipe for a length 30M in 1:2:4 cement, sand and gravel mix for thickness of 4". The job shall include curing the block after initial setting. All the tools and tackles required for the execution of the job are to be arranged and brought to site by the contracting agency.

Providing, laying, fitting , testing &commissioning of 80mm n/d G.I suction & delivery pipeline to above pump set by way of: -Providing, laying & fitting of 100mm n/d G.I pipe “B” class of Jindal/Prakash Surya make to suction & delivery ends of pumping unit to be cut to lengths, through gas cutter, as per site requirements. The job includes restoration of the dismantled portion of the road

Providing & fitting, by welding adequate strength and consistency 100mm n/d M.S. flanges fabricated out of 12mm thick M.S plate to the pipe ends. The job includes the cost of screwed fasteners and gaskets between the flanged joints.

Fabrication, providing and fitting of G.I. offsets to be fabricated out of the pipe mentioned above

Providing & fitting of 100mm n/d D.I NRV of reputed make

Providing & fitting of 100mm n/d G.I bend “B” class.

Providing & fitting of 100mm n/d, 4” long, G.I Nipples “B” class.

Providing & fitting of 100mm n/d PVC foot valve, ISI marked. .