HT and LT Line Extension, Improvement and Maintenance Works in Avinashi Division

Non-Corporation Limits

Transportation of all type of poles by vehicle (for all sizes of poles including loading and unloading) - For a lead upto 5 KM

Transportation of all type of poles by vehicle (for all sizes of poles) - For a lead of every KM above 5 KM

Transportation of all types and sizes of poles and other associated materials from road side to pole pit and vice versa upto 0.50 KM

Transporting of distribution transformer / metering set from stores to office / site upto 10 KM distance by engaging Minidor / Lorry

Transporting of distribution transformer / metering set from stores to office / site above 10 KM distance by engaging Minidor / Lorry

Transporting of line materials from stores to office / site upto 10 KM distance by engaging Minidor / Lorry

Transporting of line materials from stores to office / site above 10 KM distance by engaging Minidor / Lorry

Loading of PSC pole, 8 m length (140 kg / 200 kg WL)

Loading of PSC pole, 9 m length (300 kg / 400 kg WL)

Loading of RCC square section pole, 9 m length, (150 kg WL)

Loading of metal poles of all size

Unloading of PSC pole, 8 m length (140 kg / 200 kg WL)

Unloading of PSC pole, 9 m length (300 kg / 400 kg WL)

Unloading of RCC square section pole, 9 m length, (150 kg WL)

Unloading of metal poles of all size

Loading of distribution transformer upto 100 KVA

Loading of distribution transformer above 100 KVA and below 500 KVA

Loading of distribution transformer 500 KVA

Unloading of distribution transformer upto 100 KVA

Unloading of distribution transformer above 100 KVA and below 500 KVA

Unloading of distribution transformer 500 KVA

Loading of meteing sets of all ratios

Unloading of meteing sets of all ratios

Loading of line materials

Unloading of line materials

Excavation & backfilling of pole pit for pole upto 8.00 m length by using JCB / manual

Excavation & backfilling of pole pit for pole above 8.00 m length by using JCB / manual

Excavation & backfilling of pole pit in hard soil (common to all size of poles)

Excavation & backfilling of pole pit in areas of medium rock and dense medium rock requires blasting (common to all size of poles)

Excavation & backfilling of pole pit in rocky area (common to all size of poles) by blasting / manual

Excavation & backfilling of structure pole pit 3 x 3 x 6 feet by using JCB or Manual for single pole DT structure

Erection of PSC pole, 8 m length by using crane / manual

Erection of RCC / PSC pole, 9 m length by using crane / manual

Erection of metal support above 9 m / RSJ / rail pole / tubular pole

Mass concreting of pole with 1:4:8 mix using 40 mm jally including curing (material + labour) for a size of 0.45 x 0.45 x 1.2 m

Sleeve concreting with 1:4:8 mix using 40 mm jally including curing (material + labour)

Stay concreting with 1:4:8 mix using 40 mm jally including curing (material + labour)

Earthing of pole with GI wires 4 or 6 SWG by coil earthing

Provision of spike including earthing arrangement

Pipe earthing including excavation of earth pit and fixing earth pipe 3 m length

Excavation & backfilling of stay pit of 4.5 to 5 feet depth using JCB / Manual

Excavation & back filling of stay pit per location - hard rock without blasting

Excavation & back filling of stay pit per location - medium rock and dense medium rock requires blasting

Excavation & back filling of stay pit per location - hard rock requires blasting

Erection of stay set complete with fixing up stay wire Eye, Bow, Guy Shackle, Binding etc.

Erection of additional stay in the same stay rod, excluding excavation of stay pit and burial of stay rod

Replacement of stay rod only (including stay pit excavation, refilling & erection)

Replacement of guy shackle only in existing stay

Fixing of V cross arm 3.5 feet

Fixing of V cross arm 4.5 feet

Fixing of V cross arm 5 feet

Fixing of LT single phase cross arm

Fixing of LT 3 phase cross arm

Fixing of HT / LT TI fitting

Fixing of 11 KV porcelain pin insulator with pin or polymer composite pin insulator

Fixing of 22 KV porcelain pin insulator with pin or polymer composite pin insulator

Fixing of 33 KV porcelain pin insulator with pin or polymer composite pin insulator

Fixing of LT pin insulator

Fixing of HT disc 11 KV

Fixing of HT disc 22 KV

Fixing of HT disc 33 KV

Fixing of LT shackle

Fixing of aluminium knob

Fixing of HT LAS (3 Nos.)

Fixing of LT LAS (3 Nos.)

Fixing of guarding cross arm

Fixing of tapping channel cross arm

Fixing of double channel cross arm

Fixing of open type fuse unit

Paving and stringing of conductor of sizes upto 7/2.59 mm ACSR or other equivalent conductor (for Route Length per Phase)

Paving and stringing of conductor of above 7/2.59 mm ACSR or other equivalent conductor upto 7/3.35 mm ACSR or other equivalent conductor (for Route Length per Phase)

Paving and stringing of conductor of 7/4.09 mm ACSR or other equivalent conductor (for Route Length per Phase)

Paving and stringing of conductor of 6/4.72 + 7/1.57 (Dog) or other equivalent conductor

Paving and stringing of conductor of one run of PVC cable line of all sizes with GI wire and reel insulator

Provision of guarding arrangement with two numbers earth pits excluding stay set erection - Flat guarding

Provision of guarding arrangement - Split neutral guarding

Erection of 11 / 22 KV AB switch (Horizontal)

Erection of 11 / 22 KV AB switch (Vertical)

Erection of HG Fuse Set, 3 Nos. (in Double Pole or Single Pole Structure)

Erection of top channel for double pole DT structure

Erection of bed channel 2 Nos. for double pole DT structure

Erection of belting angle 2 Nos. for double pole DT structure

Erection of cross bracing set for double pole DT structure

Structure earthing complete with 3 pits and earth loops for double pole DT structure

HT & LT LAS fixing and jumpering complete for double pole DT structure

Fixing of support insulator angle and erection of 3 Nos. pin insulator for double pole DT structure

HT jumpering complete for double pole DT structure

Painting of all clamps and other iron materials and painting of structure pole for double pole DT structure

LT bus arrangement for double pole DT structure

DT yard cleaning and making uniform surface for double pole DT structure

Erection of double pole DT structure complete as per TNEB standard including painting, feeders arrangement, colour washing of poles etc., fixing of HT / LT LAS and jumpering, 3 Nos. earth pits with earth trough except erection of DT (as per approved split up)

Erection of tapping channel for single pole DT structure

Erection of transformer bed structure for single pole DT structure

Structure earthing complete with 3 pits and earth loops for single pole DT structure

HT jumpering complete for single pole DT structure

Painting of all clamps, other materials and painting of structure pole for single pole DT structure

LT cable arrangement for single pole DT structure

Erection of central supporting arrangement for single pole DT structure

Erection of 11 KV single pole structure complete without centre support without erection of DT (as per approved split up)

Erection of 11 KV single pole structure complete with centre support without erection of DT (as per enclosed split up)

Fixing of danger board

Erection of distribution transformer at structure - Upto 25 KVA

Erection of distribution transformer at structure - Above 25 KVA to 100 KVA

Erection of distribution transformer at structure - Above 100 KVA to 250 KVA

Erection of distribution transformer at structure - 500 KVA and above

Erection of Integrated DT Metering Arrangements / Whole Current Meter / LTCT Meter

Fixing of Modem including accessories

Erection of metering set 11 KV / 22 KV

Providing Distribution Transformer Plinth for a size of 2.10 x 2.00 x 1.35 m including earth work excavation, provision of M. sand & PCC 1:3:6, brick wall in CM 1:5 with plastering, gravel filling & top finishing with RCC 1:1:, 5:3 mix, white washing and cost of all materials, centering, curing, labour, lead, lift, etc., complete as per standard specification as directed by the Engineer at site

Dismantling of RCC, REC, PSC & metal pole of all sizes including the closing of the pit

Destruction of pole concreting at site

Retrieving grill from deteriorated RCC pole

Breaking the mass concrete of all supports

Dismantling of stay set complete including stay rod

Dismantling of stay set complete without stay rod

Dismantling of conductor of size upto 7/2.59 mm including transporting the conductors to the nearest road side and stocking in coils

Dismantling of conductor of size above 7/2.59 mm and upto 7/3.35 mm including transporting the conductors to the nearest road side and stocking in coils

Dismantling of conductor of size 7/4.09 mm including transporting the conductors to the nearest road side and stocking in coils

Dismantling of conductor of size 6/4.72 + 7/1.57 (Dog) or other equivalent conductor

Dismantling of guarding arrangement - Flat guarding

Dismantling of guarding arrangement - Split neutral guarding

Dismantling of V cross arm 3.5 feet

Dismantling of V cross arm 4.5 feet

Dismantling of V cross arm 5 feet

Dismantling of LT single phase cross arm

Dismantling of LT 3 phase cross arm

Dismantling of HT / LT TI fitting

Dismantling of HT pin insulator with pin 11 KV

Dismantling of HT pin insulator with pin 22 KV

Dismantling of HT pin insulator with pin 33 KV

Dismantling of LT pin with insulator

Dismantling of HT disc 11 KV with metal parts

Dismantling of HT disc 22 KV with metal parts

Dismantling of HT disc 33 KV with metal parts

Dismantling of LT shackle with metal parts

Dismantling of aluminium knob

Dismantling of HT LAS (3 Nos.)

Dismantling of LT LAS (3 Nos.)

Dismantling of guarding cross arm

Dismantling of tapping channel cross arm

Dismantling of double channel cross arm

Dismantling of open type fuse unit

Dismantling of 11 / 22 KV AB switch (Horizontal)

Dismantling of 11 / 22 KV AB switch (Vertical)

Dismantling of HG Fuse Set (3 Nos.)

Dismantling of top channel from double pole DT structure

Dismantling of bed channel 2 Nos. from double pole DT structure

Dismantling of belting angle 2 Nos. from double pole DT structure

Dismantling of structure earthing complete of double pole DT structure

Dismantling of HT & LT LAS and jumpering complete for double pole DT structure

Dismantling of support insulator angle and 3 Nos. pin insulator from double pole DT structure

Dismantling of HT jumpering complete of double pole DT structure

Dismantling of LT bus arrangement from double pole DT structure

Dismantling of danger board from double pole DT structure

Dismantling of tapping channel from single pole DT structure

Dismantling of transformer bed structure from single pole DT structure

Dismantling of structure earthing complete from single pole DT structure

Dismantling of HT jumpering complete of single pole DT structure

Dismantling of LT cable arrangement from single pole DT structure

Dismantling of danger board from single pole DT structure

Dismantling of central supporting arrangement from single pole DT structure

Dismantling of 11 KV single pole structure complete without centre support

Dismantling of 11 KV single pole structure complete with centre support

Releasing of distribution transformer from structure - Upto 25 KVA

Releasing of distribution transformer from structure - Above 25 KVA to 100 KVA

Releasing of distribution transformer from structure - Above 100 KVA to 250 KVA

Releasing of distribution transformer from structure - 500 KVA and above

Dismantling of Integrated DT Metering Arrangements / Whole Current Meter / LTCT Meter

Dismantling of Modem including accessories

Releasing of metering set 11 KV / 22 KV from strcuture

Manufacturing of special type clamps for rail poles, RS joists, tubular pole, distribution transformer strucutre with material

Alteration of back / stay clamp to suit works

Drilling of hole in the structure materials, clamps, etc.,

AB switch or open type side arm stud cutting and drilling holes

Cutting of flat per cutting

Cutting of channel per cutting

Cutting of angle per cutting

Cutting of pipe per cutting

TI fitting welding with clamps

Cutting of RS joist pole

Welding in RS joist pole

Manufacturing of earth pipe clamp for structure including of drilling holes and welding with earth pipe

Fixing of one set of street light fixture with clamp and fitting of all sizes including cable jumpering and including transportation

Provision of street light switching arrangement including fixing of meter, wiring & service board etc.

Fixing of street light

Dismantling of street light switch box with pipe

Dismantling of one set of street light fixture with clamp and fitting of all types

Erection of MV / sodium vapour lamp / LED including wiring and fixing at street light location including transportation

Dismantling of MV / sodium vapour lamp / LED including wiring

Replacing the worn out service connection cables

Releasing and re-erection of single phase SC wire [during conductor or support change]

Releasing and re-erection of 3 phase SC wire [during conductor or support change]

Dismantling and fixing of Single Phase Meter

Dismantling ad fixing of Three Phase Meter

Providing of line spacers in LT line 1 phase

Providing of line spacers in LT line 3 phase

Fixing of LT shunt capacitor

Numbering of pole including base painting and with cost of paint

Painting of distribution transformer of all capacities including cleaning of DT (Brush to be provided by the contractor & paint to be supplied by the TNPDCL)

Painting of cement poles by distember coating including cost of distember

Painting of RSJ / tubular pole including cross arms, TI fittings, single coating (Brush to be provided by the contractor & paint to be supplied by the TNPDCL)

Painting of pole at ground (Brush to be provided by the contractor & paint to be supplied by the TNPDCL)

Painting of transformer structure poles with two coats for each structure (Brush to be provided by the contractor & paint to be supplied by the TNPDCL)

Painting of structure materials, distribution transformers with aluminium paint of structure poles and writing of transformer details (Brush to be provided by the contractor & paint to be supplied by the TNPDCL)

Service connection details painting

Setting right the leaning pole in HT / LT at pin point location

Setting right the leaning pole in HT / LT at cut point location

Replacement of earthpipe per location

Replacing the corroded earth pipes of transformer structure and replacing the earth wire completely with aluminium lugs for termination

DT yard cleaning

Cleaning of RMU

Cleaning of Ring Fencing

Removing weed in substation yard / office premises

Bush clearance out side substation yard / office premises (light)

Jungle clearance such as kattu karuvai in the various area without uprooting

Jungle clearance such as kattu karuvai in the various area with uprooting

Clearing of tree branches of coconut tree

Clearing of tree branches of neem, tamarin, country, etc.,

Fencing of double pole distribution transformer structure at road side for a size of 3.05 x 1.50 x 1.80 m, including fabrication, erection and cost of all materials

Fencing of single pole distribution transformer structure at road side for a size of 1.20 x 1.20 x 1.80 m, including fabrication, erection and cost of all materials

Leveling of ground using Bul Dozer

Clearing of branches / trees with JCB

Engaging crane per hour (for handling of poles, metering set, DT, etc.)

Engaging JCB per hour (for extension works & maintenance works etc.)

Ground patrolling of HT lines during breakdown

Rectification of snapped HT line during breakdown - Weasel ACSR 7/2.59 or AAAC 7/2.50 sq. mm

Rectification of snapped HT line during breakdown - Rabbit ACSR 7/3.35 or AAAC 7/3.15 sq. mm

Rectification of snapped HT line during breakdown - Raccoon ACSR 7/4.09 sq. mm

Rectification of snapped HT line during breakdown - Dog ACSR 6/4.72 & 7/1.57 sq. mm

Rectification of snapped LT line during breakdown

Replacement of flashed over HT pin insulator, LAS, strain disc including jumpering, binding and transporting of required materials

Cleaning of 110 KV breakers including CTs and allied maintenance work in SS

Cleaning of 110 KV LAS in SS

Cleaning of 110 KV AB Switch and applying petrolium gelly (including consumables and petrolium gelly) in SS

Cleaning of 33/22/11 KV breakers and CTs and allied maintenance works in SS

Cleaning and checking of 110 KV bus insulators in SS

Cleaning and checking of 11/ 22 / 33 KV bus insulators in SS

Cleaning and checking of 11/22/33 KV AB switches including tightening of bolt & nuts and applying petrolium gelly and rectifying defects (excluding consumables, bolt and nuts and petrolium gelly) in SS

Replacement of clamps in substation including jumpering in SS

Tightening of clamps in all 110/33/22/11 KV buses in SS

Checking of earth pit, tightening and replacing of bolts and nuts in SS

Cleaning of cable duct in SS

Cleaning of 110 KV power transformer insulator and assissting for all other maintenance work in SS

Cleaning and checking of 33/22/11 KV PT & station transformer and assisting of other maintenance work in SS

Cleaning and checking of capacitor bank and other accessories in SS

Replacement of droppers and jumpers, taking measurement, cutting and all allied works for single Kundah / Zebra in SS

Replacement of droppers and jumpers, taking measurement, cutting and all allied works for double Kundah / Zebra in SS

Releasing, testing and refixing of existing SV / MV lamps fittings in SS

Releasing, testing and refixing of existing FTL fittings in SS

Releasing / refixing of capacitor cell in SS

Painting of steel section in SS structure after cleaning and removing the rust etc. with materials

Knitting of chair including supply of materials

Stiching of files including materials

Binding of books upto A4 size

Binding of books above A4 size

Clearing scrub jungle for UG cable works

Dismantling and clearing away the brick / stone masonry walls of any thickness and built in cement mortar

Dismantling and clearing away the plain cement concrete

Dismantling and clearing away the RCC

Earth work excavation in all kind of soils within an initial lead of 10 m and lift of 2 m in trenches

Earth work excavation in soft disintegrated rock (not requring blasting) and depositing on bank within an intial lead of 10 m and lift of 2 m in trenches (narrow pits) less than 1 m width

Removing hard rock by wedging, chiselling and trimming to proper shape where blasting is prohibited

Cutting open the blacktopped road surface including the cost for providing signal boards, lights, watch and ward to regulate the traffic, taking all precautions to protect the men, materials and the public from any possible accidents etc., using JCB / air compressor (or) drilling machines etc., wherever necessary (at anytime throughout the day) including taking all precautions to prevent any damages to the telecom and water lines

Dewatering the cable trench / duct using 5 HP diesel pumpset wherever necessary including hire charge for tools & plants, labour, lead and lifts, etc., complete

Refilling with excavated earth consolidating in layers and the top brought for line with the existing surface including cost of labour, lead, lift, etc., complete

Removal cut stone slabs / RCC cover slabs

Laying of PCC (1:3:6) using 20 mm HBG metal over the casing PVC pipes provided at the road crossings, streets, cable ducts, etc., including cost of all materials, lead, lift, labour charges, watch and ward, danger light, signal board, etc., complete

Supplying of RCC V troughs 11 KV and laying over the UG cable to proper guide and alignment inside the cable trench, painting letters of not less than 75 mm an either side of the troughs as directed by the Engineer incharge of works including the cost for all materials, transporting of troughs from the source to the destination upto 30 kms, stenciling, painting, brushing all leads and lifts, etc., complete

Laying of 11 KV RCC V troughs and laying over the UG cable to proper guide and alignment inside the cable trench, painting letters of not less than 75 mm an either side of the troughs as directed by the Engineer incharge of works including the cost of all materials, transporting of troughs from the source to the destination upto 30 kms, stenciling, painting, brushing all leads and lifts, etc., complete

Supplying of RCC V troughs 33 KV and laying over the UG Cable to proper guide and alignment inside the cable trench, painting letters of not less than 75 mm an either side of the troughs as directed by the Engineer incharge of works including the cost for all materials, transporting of troughs from the source to the destination upto 30 kms, stenciling, painting, brushing all leads and lifts, etc., complete

Laying of 33 KV RCC V troughs and laying over the UG cable to proper guide and alignment inside the cable trench, painting letters of not less than 75 mm an either side of the troughs as directed by the Engineer incharge of works including the cost of all materials, transporting of troughs from the source to the destination upto 30 kms, stenciling, painting, brushing all leads and lifts, etc., complete

Supplying, laying, jointing and fixing in position cement pipes of 225 mm dia in size in the excavated cable trench as directed by the Engineer incharge at site, including the cost of rope, sealing the ends with cement mortar, labour, lead, lifts, etc., complete (NP2 class)

Uncoiling and laying of 11 KV HT cable in the excavated trench including drawing the cable trough RCC / GL / PVC pipes wherever necessary at road crossing, etc., without any damage including transporting of cables, tools and plants, labour, lead, lift, etc., complete

Uncoiling and laying of 33 KV HT cable 3x400 sq. mm in the excavated trench including drawing the cable trough RCC / GL / PVC pipes wherever necessary at road crossing, etc., without any damage including transporting of cables, tools and plants, labour, lead, lift, etc., complete

Uncoiling and laying of 33 KV HT cable 1x630 sq. mm in the excavated trench including drawing the cable trough RCC / GL / PVC pipes wherever necessary at road crossing, etc., without any damage including transporting of cables, tools and plants, labour, lead, lift, etc., complete

Cutting the cable of required length and sealing the ends with suitable end caps for XLPE cables including cost of all materials, tools and plants, leads and lifts, etc., complete

Transporting of the remains of the empty cable drums (iron materials) to the stores for devolution including loading and unloading, leads and lifts, etc., complete

Supply and erection of cable marker in RCC (1:2:4) using 20 mm HBS metal of size 0.3 x 0.6 m and of 100 mm thick, engarving letters "TNPDCL UG CABLE", painting the engraved letters, fixing the cable marker in a bed of PCC (1:3:6) using 20 mm HBS metal of size 0.45 x 0.3 x 0.45 m including cost of all materials, labour, transporting to the destination, all leads and lifts, etc., complete

Providing watch and ward required at site as directed by the Engineer incharge

Uprooting of tree cutting charges including labour charges and power machine hire charges

Providing crusher dust instead of sand with good quality to a depth upto 150 mm (6") including cost of materials, labour, leads and lifts, etc., complete

Provision for replacement of damaged water pipe line to the original arrangement during execution of cable work, including cost of all materials, labour, transportation, lead and lift, etc., complete - Upto 4" dia pipes (LMR)

Provision for replacement of damaged water pipe line to the original arrangement during execution of cable work, including cost of all materials, labour, transportation, lead and lift, etc., complete - Upto 6" dia pipes (LMR)

Supplying and laying of HDPE pipe 110 mm dia 6 mm wall thickness by using of trenless technology horizondal direction drilling method for road crossing minium 55 metres inclusive of incertion of HT cables in HDPE pipes

Supplying and erection of cast iron 250 mm dia pipes at railway crossing by adopting trenchless method including cost of all materials, labour, transporting, lead, lift, etc., complete

Supplying and erection of cast iron 250 mm dia pipes at railway crossing by open cutting method including cost of all materials, labour, transporting, lead, lift, etc., complete

Supplying and erection of GI 150 mm dia pipe for drainage / bridge / canal crossings including cost of all materials, labour, transportation, lead, lift, etc., complete

Construction of RCC trench with removable RCC slab including cost of all materials, labour, lead, lift, transporting, centering charges, curing with all lead, lifts, etc., complete (in 1.35 mts depth)

Construction of RCC trench with removable RCC slab including cost of all materials, labour, lead, lift, transporting, centering charges, curing with all lead, lifts, etc., complete (in 1.20 mts depth)

Supplying and laying of 160 mm dia PVC pipe of 6 KSC of approved quality and of reputed make for road and drainage crossing for the cable laying at road drainage crossing including cost of all materials, labour, lead, lifts, etc., complete

Uncoiling and laying of LT cable of size 4x120 and 4x240 sq. mm in the excavated trench including drawing the cable trough RCC / GL / PVC pipes wherever necessary at road crossing, etc., without any damage including transporting of cables, tools and plants, labour, lead, lift, etc., complete

Uncoiling and laying of LT cable of size 4x25 sq. mm and 2x16 sq. mm for service connection including excavation of trench, laying of cable, refilling of trench and termination of cables and transportation

Construction of RCC pedestal of size 0.75 x 0.25 x 1.05 m (2 Nos) for fixing 6 way pillar box with 15.76 kgs of steel reinforcement in 0.394 cubic metre of ROC (1:2:4) mix concrete using 20 mm HBS metal, plastering (1:5) 12 mm thick around the pedestal, colour washing two coats over one coat of primer using white cement including cost of all materials, labour, transportation of all materials, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift, etc., complete

Construction of RCC pedestal of size 0.60 x 0.25 x 1.05 m (2 Nos) for fixing 4 way pillar box with 13.88 kgs of steel reinforcement in 0.315 cubic metre of ROC (1:2:4) mix concrete using 20 mm HBS metal, plastering (1:5) 12 mm thick around the pedestal, colour washing two coats over one coat of primer using white cement including cost of all materials, labour, transportation of all materials, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift, etc., complete

Construction of RCC pedestal of size 0.60 x 0.25 x 1.05 m (2 Nos) for fixing mini pillar box with 13.88 kgs of steel reinforcement in 0.315 cubic metre of ROC (1:2:4) mix concrete using 20 mm HBS metal, plastering (1:5) 12 mm thick around the pedestal, colour washing two coats over one coat of primer using white cement including cost of all materials, labour, transportation of all materials, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift, etc., complete

Painting two coats of enamal emulsion paint over one coat of metal white primer for 6 way pillar boxes by using spray paint including cost of materials, lead, lift, labour, etc., complete

Painting two coats of enamal emulsion paint over one coat of metal white primer for mini pillar boxes by using spray paint including cost of materials, lead, lift, labour, etc., complete

Supplying and pasting of stencil cut stickers with good adhesives with lettres showing "TNPDCL", "440 V" and "Danger" with skull and bone symbols, etc., including cost all materials, lead, lift, labour, etc., complete (LMR)

Construction of RCC trench with removable RCC slab including cost of all materials, labour, lead, lift, transporting, centering charges, curing with all lead, lifts, etc., complete (in 0.75 mts depth)

Dismantling of 6 or 4 way pillar box including associated accessoris, loading on the vehicle, transporting, unloading at stores and stacking

Dismantling of mini pillar box including associated accessoris, loading on the vehicle, transporting, unloading at stores and stacking

Erection of 11 KV 3x120 sq. mm and 3x300 sq. mm outdoor / indoor termination kit (LMR)

Erection of 11 KV 3x120 sq. mm and 3x300 sq. mm straight joint kit (LMR)

Erection of 33 KV 3x400 sq. mm indoor / outdoor terimination kit (LMR)

Erection of 33 KV 3x400 sq. mm straight joint kit (LMR)

Erection of 33 KV 1x630 sq. mm indoor / outdoor terimination kit (LMR)

Erection of 33 KV 1x630 sq. mm straight joint kit (LMR)

Supply of 11 KV 3x120 sq. mm indoor termination kit

Supply of 11 KV 3x120 sq. mm outdoor termination kit

Supply of 11 KV 3x120 sq. mm straight joint kit

Supply of 11 KV 3x300 sq. mm indoor termination kit

Supply of 11 KV 3x300 sq. mm outdoor termination kit

Supply of 11 KV 3x300 sq. mm straight joint kit

Supply of 33 KV 3x400 sq. mm indoor termination kit

Supply of 33 KV 3x400 sq. mm outdoor termination kit

Supply of 33 KV 3x400 sq. mm straight joint kit

Supply of 33 KV 1x630 sq. mm indoor termination kit

Supply of 33 KV 1x630 sq. mm outdoor termination kit

Supply of 33 KV 1x630 sq. mm straight joint kit

Corporation Limits

Transportation of all type of poles by vehicle (for all sizes of poles including loading and unloading) - For a lead upto 5 KM

Transportation of all type of poles by vehicle (for all sizes of poles) - For a lead of every KM above 5 KM

Transportation of all types and sizes of poles and other associated materials from road side to pole pit and vice versa upto 0.50 KM

Transporting of distribution transformer / metering set from stores to office / site upto 10 KM distance by engaging Minidor / Lorry

Transporting of distribution transformer / metering set from stores to office / site above 10 KM distance by engaging Minidor / Lorry

Transporting of line materials from stores to office / site upto 10 KM distance by engaging Minidor / Lorry

Transporting of line materials from stores to office / site above 10 KM distance by engaging Minidor / Lorry

Loading of PSC pole, 8 m length (140 kg / 200 kg WL)

Loading of PSC pole, 9 m length (300 kg / 400 kg WL)

Loading of RCC square section pole, 9 m length, (150 kg WL)

Loading of metal poles of all size

Unloading of PSC pole, 8 m length (140 kg / 200 kg WL)

Unloading of PSC pole, 9 m length (300 kg / 400 kg WL)

Unloading of RCC square section pole, 9 m length, (150 kg WL)

Unloading of metal poles of all size

Loading of distribution transformer upto 100 KVA

Loading of distribution transformer above 100 KVA and below 500 KVA

Loading of distribution transformer 500 KVA

Unloading of distribution transformer upto 100 KVA

Unloading of distribution transformer above 100 KVA and below 500 KVA

Unloading of distribution transformer 500 KVA

Loading of meteing sets of all ratios

Unloading of meteing sets of all ratios

Loading of line materials

Unloading of line materials

Excavation & backfilling of pole pit for pole upto 8.00 m length by using JCB / manual

Excavation & backfilling of pole pit for pole above 8.00 m length by using JCB / manual

Excavation & backfilling of pole pit in hard soil (common to all size of poles)

Excavation & backfilling of pole pit in areas of medium rock and dense medium rock requires blasting (common to all size of poles)

Excavation & backfilling of pole pit in rocky area (common to all size of poles) by blasting / manual

Excavation & backfilling of structure pole pit 3 x 3 x 6 feet by using JCB or Manual for single pole DT structure

Erection of PSC pole, 8 m length by using crane / manual

Erection of RCC / PSC pole, 9 m length by using crane / manual

Erection of metal support above 9 m / RSJ / rail pole / tubular pole

Mass concreting of pole with 1:4:8 mix using 40 mm jally including curing (material + labour) for a size of 0.45 x 0.45 x 1.2 m

Sleeve concreting with 1:4:8 mix using 40 mm jally including curing (material + labour)

Stay concreting with 1:4:8 mix using 40 mm jally including curing (material + labour)

Earthing of pole with GI wires 4 or 6 SWG by coil earthing

Provision of spike including earthing arrangement

Pipe earthing including excavation of earth pit and fixing earth pipe 3 m length

Excavation & backfilling of stay pit of 4.5 to 5 feet depth using JCB / Manual

Excavation & back filling of stay pit per location - hard rock without blasting

Excavation & back filling of stay pit per location - medium rock and dense medium rock requires blasting

Excavation & back filling of stay pit per location - hard rock requires blasting

Erection of stay set complete with fixing up stay wire Eye, Bow, Guy Shackle, Binding etc.

Erection of additional stay in the same stay rod, excluding excavation of stay pit and burial of stay rod

Replacement of stay rod only (including stay pit excavation, refilling & erection)

Replacement of guy shackle only in existing stay

Fixing of V cross arm 3.5 feet

Fixing of V cross arm 4.5 feet

Fixing of V cross arm 5 feet

Fixing of LT single phase cross arm

Fixing of LT 3 phase cross arm

Fixing of HT / LT TI fitting

Fixing of 11 KV porcelain pin insulator with pin or polymer composite pin insulator

Fixing of 22 KV porcelain pin insulator with pin or polymer composite pin insulator

Fixing of 33 KV porcelain pin insulator with pin or polymer composite pin insulator

Fixing of LT pin insulator

Fixing of HT disc 11 KV

Fixing of HT disc 22 KV

Fixing of HT disc 33 KV

Fixing of LT shackle

Fixing of aluminium knob

Fixing of HT LAS (3 Nos.)

Fixing of LT LAS (3 Nos.)

Fixing of guarding cross arm

Fixing of tapping channel cross arm

Fixing of double channel cross arm

Fixing of open type fuse unit

Paving and stringing of conductor of sizes upto 7/2.59 mm ACSR or other equivalent conductor (for Route Length per Phase)

Paving and stringing of conductor of above 7/2.59 mm ACSR or other equivalent conductor upto 7/3.35 mm ACSR or other equivalent conductor (for Route Length per Phase)

Paving and stringing of conductor of 7/4.09 mm ACSR or other equivalent conductor (for Route Length per Phase)

Paving and stringing of conductor of 6/4.72 + 7/1.57 (Dog) or other equivalent conductor

Paving and stringing of conductor of one run of PVC cable line of all sizes with GI wire and reel insulator

Provision of guarding arrangement with two numbers earth pits excluding stay set erection - Flat guarding

Provision of guarding arrangement - Split neutral guarding

Erection of 11 / 22 KV AB switch (Horizontal)

Erection of 11 / 22 KV AB switch (Vertical)

Erection of HG Fuse Set, 3 Nos. (in Double Pole or Single Pole Structure)

Erection of top channel for double pole DT structure

Erection of bed channel 2 Nos. for double pole DT structure

Erection of belting angle 2 Nos. for double pole DT structure

Erection of cross bracing set for double pole DT structure

Structure earthing complete with 3 pits and earth loops for double pole DT structure

HT & LT LAS fixing and jumpering complete for double pole DT structure

Fixing of support insulator angle and erection of 3 Nos. pin insulator for double pole DT structure

HT jumpering complete for double pole DT structure

Painting of all clamps and other iron materials and painting of structure pole for double pole DT structure

LT bus arrangement for double pole DT structure

DT yard cleaning and making uniform surface for double pole DT structure

Erection of double pole DT structure complete as per TNEB standard including painting, feeders arrangement, colour washing of poles etc., fixing of HT / LT LAS and jumpering, 3 Nos. earth pits with earth trough except erection of DT (as per approved split up)

Erection of tapping channel for single pole DT structure

Erection of transformer bed structure for single pole DT structure

Structure earthing complete with 3 pits and earth loops for single pole DT structure

HT jumpering complete for single pole DT structure

Painting of all clamps, other materials and painting of structure pole for single pole DT structure

LT cable arrangement for single pole DT structure

Erection of central supporting arrangement for single pole DT structure

Erection of 11 KV single pole structure complete without centre support without erection of DT (as per approved split up)

Erection of 11 KV single pole structure complete with centre support without erection of DT (as per enclosed split up)

Fixing of danger board

Erection of distribution transformer at structure - Upto 25 KVA

Erection of distribution transformer at structure - Above 25 KVA to 100 KVA

Erection of distribution transformer at structure - Above 100 KVA to 250 KVA

Erection of distribution transformer at structure - 500 KVA and above

Erection of Integrated DT Metering Arrangements / Whole Current Meter / LTCT Meter

Fixing of Modem including accessories

Erection of metering set 11 KV / 22 KV

Providing Distribution Transformer Plinth for a size of 2.10 x 2.00 x 1.35 m including earth work excavation, provision of M. sand & PCC 1:3:6, brick wall in CM 1:5 with plastering, gravel filling & top finishing with RCC 1:1:, 5:3 mix, white washing and cost of all materials, centering, curing, labour, lead, lift, etc., complete as per standard specification as directed by the Engineer at site

Dismantling of RCC, REC, PSC & metal pole of all sizes including the closing of the pit

Destruction of pole concreting at site

Retrieving grill from deteriorated RCC pole

Breaking the mass concrete of all supports

Dismantling of stay set complete including stay rod

Dismantling of stay set complete without stay rod

Dismantling of conductor of size upto 7/2.59 mm including transporting the conductors to the nearest road side and stocking in coils

Dismantling of conductor of size above 7/2.59 mm and upto 7/3.35 mm including transporting the conductors to the nearest road side and stocking in coils

Dismantling of conductor of size 7/4.09 mm including transporting the conductors to the nearest road side and stocking in coils

Dismantling of conductor of size 6/4.72 + 7/1.57 (Dog) or other equivalent conductor

Dismantling of guarding arrangement - Flat guarding

Dismantling of guarding arrangement - Split neutral guarding

Dismantling of V cross arm 3.5 feet

Dismantling of V cross arm 4.5 feet

Dismantling of V cross arm 5 feet

Dismantling of LT single phase cross arm

Dismantling of LT 3 phase cross arm

Dismantling of HT / LT TI fitting

Dismantling of HT pin insulator with pin 11 KV

Dismantling of HT pin insulator with pin 22 KV

Dismantling of HT pin insulator with pin 33 KV

Dismantling of LT pin with insulator

Dismantling of HT disc 11 KV with metal parts

Dismantling of HT disc 22 KV with metal parts

Dismantling of HT disc 33 KV with metal parts

Dismantling of LT shackle with metal parts

Dismantling of aluminium knob

Dismantling of HT LAS (3 Nos.)

Dismantling of LT LAS (3 Nos.)

Dismantling of guarding cross arm

Dismantling of tapping channel cross arm

Dismantling of double channel cross arm

Dismantling of open type fuse unit

Dismantling of 11 / 22 KV AB switch (Horizontal)

Dismantling of 11 / 22 KV AB switch (Vertical)

Dismantling of HG Fuse Set (3 Nos.)

Dismantling of top channel from double pole DT structure

Dismantling of bed channel 2 Nos. from double pole DT structure

Dismantling of belting angle 2 Nos. from double pole DT structure

Dismantling of structure earthing complete of double pole DT structure

Dismantling of HT & LT LAS and jumpering complete for double pole DT structure

Dismantling of support insulator angle and 3 Nos. pin insulator from double pole DT structure

Dismantling of HT jumpering complete of double pole DT structure

Dismantling of LT bus arrangement from double pole DT structure

Dismantling of danger board from double pole DT structure

Dismantling of tapping channel from single pole DT structure

Dismantling of transformer bed structure from single pole DT structure

Dismantling of structure earthing complete from single pole DT structure

Dismantling of HT jumpering complete of single pole DT structure

Dismantling of LT cable arrangement from single pole DT structure

Dismantling of danger board from single pole DT structure

Dismantling of central supporting arrangement from single pole DT structure

Dismantling of 11 KV single pole structure complete without centre support

Dismantling of 11 KV single pole structure complete with centre support

Releasing of distribution transformer from structure - Upto 25 KVA

Releasing of distribution transformer from structure - Above 25 KVA to 100 KVA

Releasing of distribution transformer from structure - Above 100 KVA to 250 KVA

Releasing of distribution transformer from structure - 500 KVA and above

Dismantling of Integrated DT Metering Arrangements / Whole Current Meter / LTCT Meter

Dismantling of Modem including accessories

Releasing of metering set 11 KV / 22 KV from strcuture

Manufacturing of special type clamps for rail poles, RS joists, tubular pole, distribution transformer strucutre with material

Alteration of back / stay clamp to suit works

Drilling of hole in the structure materials, clamps, etc.,

AB switch or open type side arm stud cutting and drilling holes

Cutting of flat per cutting

Cutting of channel per cutting

Cutting of angle per cutting

Cutting of pipe per cutting

TI fitting welding with clamps

Cutting of RS joist pole

Welding in RS joist pole

Manufacturing of earth pipe clamp for structure including of drilling holes and welding with earth pipe

Fixing of one set of street light fixture with clamp and fitting of all sizes including cable jumpering and including transportation

Provision of street light switching arrangement including fixing of meter, wiring & service board etc.

Fixing of street light

Dismantling of street light switch box with pipe

Dismantling of one set of street light fixture with clamp and fitting of all types

Erection of MV / sodium vapour lamp / LED including wiring and fixing at street light location including transportation

Dismantling of MV / sodium vapour lamp / LED including wiring

Replacing the worn out service connection cables

Releasing and re-erection of single phase SC wire [during conductor or support change]

Releasing and re-erection of 3 phase SC wire [during conductor or support change]

Dismantling and fixing of Single Phase Meter

Dismantling ad fixing of Three Phase Meter

Providing of line spacers in LT line 1 phase

Providing of line spacers in LT line 3 phase

Fixing of LT shunt capacitor

Numbering of pole including base painting and with cost of paint

Painting of distribution transformer of all capacities including cleaning of DT (Brush to be provided by the contractor & paint to be supplied by the TNPDCL)

Painting of cement poles by distember coating including cost of distember

Painting of RSJ / tubular pole including cross arms, TI fittings, single coating (Brush to be provided by the contractor & paint to be supplied by the TNPDCL)

Painting of pole at ground (Brush to be provided by the contractor & paint to be supplied by the TNPDCL)

Painting of transformer structure poles with two coats for each structure (Brush to be provided by the contractor & paint to be supplied by the TNPDCL)

Painting of structure materials, distribution transformers with aluminium paint of structure poles and writing of transformer details (Brush to be provided by the contractor & paint to be supplied by the TNPDCL)

Service connection details painting

Setting right the leaning pole in HT / LT at pin point location

Setting right the leaning pole in HT / LT at cut point location

Replacement of earthpipe per location

Replacing the corroded earth pipes of transformer structure and replacing the earth wire completely with aluminium lugs for termination

DT yard cleaning

Cleaning of RMU

Cleaning of Ring Fencing

Removing weed in substation yard / office premises

Bush clearance out side substation yard / office premises (light)

Jungle clearance such as kattu karuvai in the various area without uprooting

Jungle clearance such as kattu karuvai in the various area with uprooting

Clearing of tree branches of coconut tree

Clearing of tree branches of neem, tamarin, country, etc.,

Fencing of double pole distribution transformer structure at road side for a size of 3.05 x 1.50 x 1.80 m, including fabrication, erection and cost of all materials

Fencing of single pole distribution transformer structure at road side for a size of 1.20 x 1.20 x 1.80 m, including fabrication, erection and cost of all materials

Leveling of ground using Bul Dozer

Clearing of branches / trees with JCB

Engaging crane per hour (for handling of poles, metering set, DT, etc.)

Engaging JCB per hour (for extension works & maintenance works etc.)

Ground patrolling of HT lines during breakdown

Rectification of snapped HT line during breakdown - Weasel ACSR 7/2.59 or AAAC 7/2.50 sq. mm

Rectification of snapped HT line during breakdown - Rabbit ACSR 7/3.35 or AAAC 7/3.15 sq. mm

Rectification of snapped HT line during breakdown - Raccoon ACSR 7/4.09 sq. mm

Rectification of snapped HT line during breakdown - Dog ACSR 6/4.72 & 7/1.57 sq. mm

Rectification of snapped LT line during breakdown

Replacement of flashed over HT pin insulator, LAS, strain disc including jumpering, binding and transporting of required materials

Cleaning of 110 KV breakers including CTs and allied maintenance work in SS

Cleaning of 110 KV LAS in SS

Cleaning of 110 KV AB Switch and applying petrolium gelly (including consumables and petrolium gelly) in SS

Cleaning of 33/22/11 KV breakers and CTs and allied maintenance works in SS

Cleaning and checking of 110 KV bus insulators in SS

Cleaning and checking of 11/ 22 / 33 KV bus insulators in SS

Cleaning and checking of 11/22/33 KV AB switches including tightening of bolt & nuts and applying petrolium gelly and rectifying defects (excluding consumables, bolt and nuts and petrolium gelly) in SS

Replacement of clamps in substation including jumpering in SS

Tightening of clamps in all 110/33/22/11 KV buses in SS

Checking of earth pit, tightening and replacing of bolts and nuts in SS

Cleaning of cable duct in SS

Cleaning of 110 KV power transformer insulator and assissting for all other maintenance work in SS

Cleaning and checking of 33/22/11 KV PT & station transformer and assisting of other maintenance work in SS

Cleaning and checking of capacitor bank and other accessories in SS

Replacement of droppers and jumpers, taking measurement, cutting and all allied works for single Kundah / Zebra in SS

Replacement of droppers and jumpers, taking measurement, cutting and all allied works for double Kundah / Zebra in SS

Releasing, testing and refixing of existing SV / MV lamps fittings in SS

Releasing, testing and refixing of existing FTL fittings in SS

Releasing / refixing of capacitor cell in SS

Painting of steel section in SS structure after cleaning and removing the rust etc. with materials

Knitting of chair including supply of materials

Stiching of files including materials

Binding of books upto A4 size

Binding of books above A4 size

Clearing scrub jungle for UG cable works

Dismantling and clearing away the brick / stone masonry walls of any thickness and built in cement mortar

Dismantling and clearing away the plain cement concrete

Dismantling and clearing away the RCC

Earth work excavation in all kind of soils within an initial lead of 10 m and lift of 2 m in trenches

Earth work excavation in soft disintegrated rock (not requring blasting) and depositing on bank within an intial lead of 10 m and lift of 2 m in trenches (narrow pits) less than 1 m width

Removing hard rock by wedging, chiselling and trimming to proper shape where blasting is prohibited

Cutting open the blacktopped road surface including the cost for providing signal boards, lights, watch and ward to regulate the traffic, taking all precautions to protect the men, materials and the public from any possible accidents etc., using JCB / air compressor (or) drilling machines etc., wherever necessary (at anytime throughout the day) including taking all precautions to prevent any damages to the telecom and water lines

Dewatering the cable trench / duct using 5 HP diesel pumpset wherever necessary including hire charge for tools & plants, labour, lead and lifts, etc., complete

Refilling with excavated earth consolidating in layers and the top brought for line with the existing surface including cost of labour, lead, lift, etc., complete

Removal cut stone slabs / RCC cover slabs

Laying of PCC (1:3:6) using 20 mm HBG metal over the casing PVC pipes provided at the road crossings, streets, cable ducts, etc., including cost of all materials, lead, lift, labour charges, watch and ward, danger light, signal board, etc., complete

Supplying of RCC V troughs 11 KV and laying over the UG cable to proper guide and alignment inside the cable trench, painting letters of not less than 75 mm an either side of the troughs as directed by the Engineer incharge of works including the cost for all materials, transporting of troughs from the source to the destination upto 30 kms, stenciling, painting, brushing all leads and lifts, etc., complete

Laying of 11 KV RCC V troughs and laying over the UG cable to proper guide and alignment inside the cable trench, painting letters of not less than 75 mm an either side of the troughs as directed by the Engineer incharge of works including the cost of all materials, transporting of troughs from the source to the destination upto 30 kms, stenciling, painting, brushing all leads and lifts, etc., complete

Supplying of RCC V troughs 33 KV and laying over the UG Cable to proper guide and alignment inside the cable trench, painting letters of not less than 75 mm an either side of the troughs as directed by the Engineer incharge of works including the cost for all materials, transporting of troughs from the source to the destination upto 30 kms, stenciling, painting, brushing all leads and lifts, etc., complete

Laying of 33 KV RCC V troughs and laying over the UG cable to proper guide and alignment inside the cable trench, painting letters of not less than 75 mm an either side of the troughs as directed by the Engineer incharge of works including the cost of all materials, transporting of troughs from the source to the destination upto 30 kms, stenciling, painting, brushing all leads and lifts, etc., complete

Supplying, laying, jointing and fixing in position cement pipes of 225 mm dia in size in the excavated cable trench as directed by the Engineer incharge at site, including the cost of rope, sealing the ends with cement mortar, labour, lead, lifts, etc., complete (NP2 class)

Uncoiling and laying of 11 KV HT cable in the excavated trench including drawing the cable trough RCC / GL / PVC pipes wherever necessary at road crossing, etc., without any damage including transporting of cables, tools and plants, labour, lead, lift, etc., complete

Uncoiling and laying of 33 KV HT cable 3x400 sq. mm in the excavated trench including drawing the cable trough RCC / GL / PVC pipes wherever necessary at road crossing, etc., without any damage including transporting of cables, tools and plants, labour, lead, lift, etc., complete

Uncoiling and laying of 33 KV HT cable 1x630 sq. mm in the excavated trench including drawing the cable trough RCC / GL / PVC pipes wherever necessary at road crossing, etc., without any damage including transporting of cables, tools and plants, labour, lead, lift, etc., complete

Cutting the cable of required length and sealing the ends with suitable end caps for XLPE cables including cost of all materials, tools and plants, leads and lifts, etc., complete

Transporting of the remains of the empty cable drums (iron materials) to the stores for devolution including loading and unloading, leads and lifts, etc., complete

Supply and erection of cable marker in RCC (1:2:4) using 20 mm HBS metal of size 0.3 x 0.6 m and of 100 mm thick, engarving letters "TNPDCL UG CABLE", painting the engraved letters, fixing the cable marker in a bed of PCC (1:3:6) using 20 mm HBS metal of size 0.45 x 0.3 x 0.45 m including cost of all materials, labour, transporting to the destination, all leads and lifts, etc., complete

Providing watch and ward required at site as directed by the Engineer incharge

Uprooting of tree cutting charges including labour charges and power machine hire charges

Providing crusher dust instead of sand with good quality to a depth upto 150 mm (6") including cost of materials, labour, leads and lifts, etc., complete

Provision for replacement of damaged water pipe line to the original arrangement during execution of cable work, including cost of all materials, labour, transportation, lead and lift, etc., complete - Upto 4" dia pipes (LMR)

Provision for replacement of damaged water pipe line to the original arrangement during execution of cable work, including cost of all materials, labour, transportation, lead and lift, etc., complete - Upto 6" dia pipes (LMR)

Supplying and laying of HDPE pipe 110 mm dia 6 mm wall thickness by using of trenless technology horizondal direction drilling method for road crossing minium 55 metres inclusive of incertion of HT cables in HDPE pipes

Supplying and erection of cast iron 250 mm dia pipes at railway crossing by adopting trenchless method including cost of all materials, labour, transporting, lead, lift, etc., complete

Supplying and erection of cast iron 250 mm dia pipes at railway crossing by open cutting method including cost of all materials, labour, transporting, lead, lift, etc., complete

Supplying and erection of GI 150 mm dia pipe for drainage / bridge / canal crossings including cost of all materials, labour, transportation, lead, lift, etc., complete

Construction of RCC trench with removable RCC slab including cost of all materials, labour, lead, lift, transporting, centering charges, curing with all lead, lifts, etc., complete (in 1.35 mts depth)

Construction of RCC trench with removable RCC slab including cost of all materials, labour, lead, lift, transporting, centering charges, curing with all lead, lifts, etc., complete (in 1.20 mts depth)

Supplying and laying of 160 mm dia PVC pipe of 6 KSC of approved quality and of reputed make for road and drainage crossing for the cable laying at road drainage crossing including cost of all materials, labour, lead, lifts, etc., complete

Uncoiling and laying of LT cable of size 4x120 and 4x240 sq. mm in the excavated trench including drawing the cable trough RCC / GL / PVC pipes wherever necessary at road crossing, etc., without any damage including transporting of cables, tools and plants, labour, lead, lift, etc., complete

Uncoiling and laying of LT cable of size 4x25 sq. mm and 2x16 sq. mm for service connection including excavation of trench, laying of cable, refilling of trench and termination of cables and transportation

Construction of RCC pedestal of size 0.75 x 0.25 x 1.05 m (2 Nos) for fixing 6 way pillar box with 15.76 kgs of steel reinforcement in 0.394 cubic metre of ROC (1:2:4) mix concrete using 20 mm HBS metal, plastering (1:5) 12 mm thick around the pedestal, colour washing two coats over one coat of primer using white cement including cost of all materials, labour, transportation of all materials, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift, etc., complete

Construction of RCC pedestal of size 0.60 x 0.25 x 1.05 m (2 Nos) for fixing 4 way pillar box with 13.88 kgs of steel reinforcement in 0.315 cubic metre of ROC (1:2:4) mix concrete using 20 mm HBS metal, plastering (1:5) 12 mm thick around the pedestal, colour washing two coats over one coat of primer using white cement including cost of all materials, labour, transportation of all materials, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift, etc., complete

Construction of RCC pedestal of size 0.60 x 0.25 x 1.05 m (2 Nos) for fixing mini pillar box with 13.88 kgs of steel reinforcement in 0.315 cubic metre of ROC (1:2:4) mix concrete using 20 mm HBS metal, plastering (1:5) 12 mm thick around the pedestal, colour washing two coats over one coat of primer using white cement including cost of all materials, labour, transportation of all materials, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift, etc., complete

Painting two coats of enamal emulsion paint over one coat of metal white primer for 6 way pillar boxes by using spray paint including cost of materials, lead, lift, labour, etc., complete

Painting two coats of enamal emulsion paint over one coat of metal white primer for mini pillar boxes by using spray paint including cost of materials, lead, lift, labour, etc., complete

Supplying and pasting of stencil cut stickers with good adhesives with lettres showing "TNPDCL", "440 V" and "Danger" with skull and bone symbols, etc., including cost all materials, lead, lift, labour, etc., complete (LMR)

Construction of RCC trench with removable RCC slab including cost of all materials, labour, lead, lift, transporting, centering charges, curing with all lead, lifts, etc., complete (in 0.75 mts depth)

Dismantling of 6 or 4 way pillar box including associated accessoris, loading on the vehicle, transporting, unloading at stores and stacking

Dismantling of mini pillar box including associated accessoris, loading on the vehicle, transporting, unloading at stores and stacking

Erection of 11 KV 3x120 sq. mm and 3x300 sq. mm outdoor / indoor termination kit (LMR)

Erection of 11 KV 3x120 sq. mm and 3x300 sq. mm straight joint kit (LMR)

Erection of 33 KV 3x400 sq. mm indoor / outdoor terimination kit (LMR)

Erection of 33 KV 3x400 sq. mm straight joint kit (LMR)

Erection of 33 KV 1x630 sq. mm indoor / outdoor terimination kit (LMR)

Erection of 33 KV 1x630 sq. mm straight joint kit (LMR)

Supply of 11 KV 3x120 sq. mm indoor termination kit

Supply of 11 KV 3x120 sq. mm outdoor termination kit

Supply of 11 KV 3x120 sq. mm straight joint kit

Supply of 11 KV 3x300 sq. mm indoor termination kit

Supply of 11 KV 3x300 sq. mm outdoor termination kit

Supply of 11 KV 3x300 sq. mm straight joint kit

Supply of 33 KV 3x400 sq. mm indoor termination kit

Supply of 33 KV 3x400 sq. mm outdoor termination kit

Supply of 33 KV 3x400 sq. mm straight joint kit

Supply of 33 KV 1x630 sq. mm indoor termination kit

Supply of 33 KV 1x630 sq. mm outdoor termination kit

Supply of 33 KV 1x630 sq. mm straight joint kit

Please Enable Macros to View BoQ information