PROVN OF SINGLE ACCN FOR TWO JCO AND PROVN OF DRAINAGE AT JANGLOTE UNDER GE BASOLI

Amount

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed..

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

Excavation in over area n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 ( Using 40mm graded crushed stone aggregate ) in foundation filling and mass concrete complete all as specified and directed.

M&L PCC 1:3:6 type C-2 ( Using 40mm graded crushed stone aggregate ) in foundation filling and mass concrete complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed .

M&L for brick work with old size sub class 'B' bricks straight or curved on plan to any radius built in cement mortar 1:4 as in half thick brick wall complete all as specified and directed.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directing complete all as specified and directed .

M&L for M-25 Design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete (using 20 mm graded crushed stone aggregate) complete all as specified and directed .

M&L for M-25 Design mix as in Columns, pillars, piers, posts and struts (using 20 mm graded crushed stone aggregate) complete all as specified and directed .

M&L for M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5m span (using 20mm graded crushed stone aggregate) complete all as specified and directed .

M&L for M-25 Design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and stair case slab, in shelves, parapets, railing and like(using 20 mm graded crushed stone aggregate) complete all as specified and directed .

TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed .

All as per item No 14 above but 6 mm to 8mm dia

All as per item No 14 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams; and similar works; vertical or to batter for rough finished flat surfaces complete all as specified and directed.

Form work to edges of concrete flats, breaks in floors, openings in concrete walls,floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 20 cm wide for rough finished flat surfaces of concrete complete all as specified and directed.

Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished surface even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and directed. (Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified and directed.

Rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 10mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed.

Spreading, levelling, watering and well ramming in layers not exc 25 cm thick each as in floor as in soft / loose soil. complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft / loose soil. complete all as specified and directed.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L hardcore of broken stone or boulders. gauge n.exc 63mm, deposited spread and leveled in layers n.exc 15cm thick. Watered hand rammed to a true surface, complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450x300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for 20 mm thick Granite black colour work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete, all as specified and directed.

Rounding/moulding to edges of stone slabs, marble stone, granite stone slab one edge such as in steps, cooking plateform and other similar situation complete, all as specified and directed.

Plain cement concrete 75mm thick 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub floor, sub base complete, all as specified and directed.

M&L for providing 75mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

M&L for roof treatment with the following specification - (a)20mm thick rendering in CM 1:4 with WPC @3% by weight of cement (b) applying evenly one coat of blown hot bitumen of grade 85/25 @ 1.2 kg per sqm on primed surfaces. (e) Applying a layer of APP based polymeric membrane 3mm thick (minimum) weighting 3.5 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with granular finish. The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application . complete all as specified and directed.

M&L Box type steel windows any ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes shall be measured and paid separately) with side hung shuttters with steel handle and steel peg stay devotailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing shown on drg welded to GI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC block etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fix for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe -290 Gde -E-165,complete all as specified and directed.

M&L for 1.25mm thick MS sheet pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and directed..

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing complete all as specified and directed..

M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L forGlazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with shash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a). complete all as specified and directed.

Supply and fix PVC board 20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination weight not less than 12Kg/Sqm fixed with screws to timber/angle iron frame work etc complete all as specified and directed.

Supply and fix 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints,complete all as specified and directed.

Supply and fix Factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&FGalvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm, complete all as specified and directed.

Supply and fix for 100mm long stainless steel Butt hinges complete all as specified and directed.

Supply and fix for Extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete, all as specified and directed.

Supply and fix for Extruded aluminium alloy handles fabricated type anodised and fixed, 100 mm size complete, all as specified and directed.

Supply and fix for Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt,complete all as specified and directed.

Supply and fix for Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed,complete all as specified and directed.

Supply and fix for 100mm size hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified and directed.

Supply and fix continous piano hinges, mild steel, bright finish or electrogalvanised width of flap (when open) 30mm complete all as specified and directed.

Supply and fix Mild steel, peg set of six. complete all as specified and directed.

S/F Curtain rod colour coated with fixing brackets stops, rollers etc..complete all as specified and directed..

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate. complete all as specified and directed..

M&L for preparation of new plaster surface of wall and applying two coat of distemper oil emulison over a coat of 3mm thick wall care putty, complete all as specified and directed.

Material and labour for preparation of new plastred surfaces and applying cement base paint two coats on walls over a coat of primer complete all as specified and directed by Engineer-in-Charge

M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint.complete all as specified and directed.

M&L for preparation of steel and iron surfaces not exceeding 10 cms width or girth and applying two coats of synthetic enamel paint.complete all as specified and directed.

Supply and fix wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed.

S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe complete all as specified and directed.

S&F vitreous china wash hand basin white oval type of size 560x410x410 mm including bracket, cutting for and pinning the ends of brackets or erecting stands including 32mm PTMT waste coupling and waste pipe fixed on granite top complete all as specified and directed.

Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.)complete all as specified and directed.

S&F Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

S&F Steel water tubing 25 mm bore medium grade galvanised with all fittings including short lengths, laid in floor/trenches complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

Cutting and screwing existing steel tubing of 40/50mm dia for alterations/additions in position without taking down including insertion of Tee or steel tube complete all as specified and as directed. complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe of 20mm bore complete all as specified and directed.

S&F Stop valve/ Angle valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of bore dia 15mm complete all as specified and directed.

Supply and fix in repair for 15mm dia bore Stop valve concealed type,long shank cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

S&F Bib taps, cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, complete all as specified and directed.

Supply and fix CP health faucet ABS body with 1.00 mtr long SS branded connection pipe complete all as specified and directed

Supply and fix CP soap dish any type complete all as specified and directed

Supply and fix 15mm dia brass chromium plated wall mixture for mixing hot and cold water complete all as specified and directed

Supply and fix in repair CP paper holder with and including chromium plated brass screw complete all as specified and directed.Make: Cat Part No 7741 of Jaquar or equivalent in as per Appendix'F'.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in drains or surface channels finished even and fair complete, all as specified and directed.

M&L Concrete bed to drain pipes including forming cradles, in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), for 150mm dia pipe complete all as specified and directed..

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and directed.

. M&L for UPVC underground drainage pipe (UDS) type 'B' 160mm dia with thickness 4mm (min) and pressure rating SN4 as per IS-15328, jointed in cement solvent solution complete including testing, haunching against the sides of pipes in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed.. Make : JAIN IRRIGATION / AJAY FLOW GUARD/ ASTRA/ ASHIRBAD/ SUPREAM

Supply and fix reinforced concrete pipes, class NP3, laid and jointed complete with collars bore of pipe 600 mm, complete all as specified and directed.

M&L precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in man hole covers set in cement mortar 1:6 all as specified and directed incl necessary form work. Note: Steel reinforcement shall be measured and paid for separately under respective items

Construction of septic tank with cover slab RCC M-30(Design mix) for 10 users brick work in CM 1:4 (with top of slab at ground level) incl necessary excavation and earth work in any type of soil and disposal of surplus soil as directed including RCC manohole covers with angle iron welded frame complete vent shaft cowl all as shown on drg and specified.

Soakage well in exc in ordinary soil, foundation in PCC 1:3:6 walls of honey combed and solid in M-30 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-30/ RR masonry/ Filling with brick bats, complete of size 1.2M dia X 3.0M effective depth, all as specified and directed as per Engr-in-Charge and shown on Drg No CE/TD/1203/2003 sheet 1/2 and 2/2.

Supply and fix in repair Tubular towel rail, 20mm dia, D-type, 600mm long between flanges brass chromium plated fixed with rawl plug etc complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 75 mm bore fixed in trenches or floor. complete all as specified and directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 75 mm bore fixed in wall including necessary arrangements. complete all as specified and directed

S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement. complete all as specified and directed

S&F PVC (SWR) bends of any radius with access door for 75mm bore of pipe. complete all as specified and directed

S&F PVC (SWR) bends of any radius with access door for 110mm bore of pipe. complete all as specified and directed

S&F PVC (SWR) Gully-Trap with grating for 110mm bore of pipe. complete all as specified and directed

S&F PVC (SWR) junction single (Single T) equal or unequal provided with access door for 75mm bore of pipe. complete all as specified and directed

S&F PVC (SWR) junction single (Single T) equal or unequal provided with access door for 110mm bore of pipe. complete all as specified and directed

M&L Anti-termite treatment to backfilling in contact with foundation at the rate of 7.5 ltr of emulsion per sqm on vertical surface, complete all as specified and directed

M&L Anti-termite treatment to the top surface of filled earth at the rate of 5 Ltr per sqm of surface complete all as specified and directed

M&L Anti-termite treatment to the under plinth at the rate of 5 Ltr per sqm of surface complete all as specified and directed

S&F, brass chromium plated shower rose 125 mm size with or without swivel joints any size including fixing to steel pipe or union fixed in repair complete all as specified and directed.

S&F, 4mm thick frosted glass and glazing with oil putty or wooden beads in squares n exc 0.5 Sqm in each pane complete all as specified and directed.

Point wiring with 1.5 Sqmm (nominal area) copper conductor cable FRLS (Multistranded) PVC insulated and unsheathed in and incl PVC conduit concealed with pressed steel terminal boxes of adequate size with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable FRLS (multistranded) PVC insulated and unsheathed with colour code earth wire to common earth dolly complete all as specified. Note (a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall ,floors etc.

All as per srl item No 106 here in before but one 3 pin socket out let 5 Amps on same board.

All as per srl item No 106 here in before but one 3 pin socket out let 5 Amps on independent board

Point wiring with 2.5 Sqmm copper conductor cable FRLS (Multistranded ) PVC insulated and unsheathed cable in and incl PVC conduit concealed with pressed steel terminal boxes of adequate size with 3mm thick plastic laminated sheet cover for one 3 pin socket out let 15 Amp on independent board including continueous 2.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed Cable earth wire to common earth dolly complete all as specified.

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and directed.

Supply and fix switch piano flush type single pole one way 15 Amps complete all as specified and directed.

Supply and fix socket outlet 2 in 1, 3 pin 5 Amps flush type (Multi purpose) complete all as specified and directed.

Supply and fix socket outlet 2 in 1, 3 pin 15 Amps flush type (Multi purpose) complete all as specified and directed.

Supply and fix Ceiling rose surface polycarbonated, three terminals complete all as specified and directed.

Supply and fix in replacement LED tube light fitting 1 x 20 watt, 230v including tube rod with polycarbonate diffuser , of 4 feet Industrialf box type fitting complete with all accessories and pre-wired incl all necessary electric connection with three core copper cable 23/0.0076 complete all as specified and directed.

Supply and fix water heater storage type, (geyser) electric, 5 star bee rating with stainless steel inner tank single phase 230 vols, 50 HZ capacity 25 Ltrs 2000 watt element including cutting/chasing of hole for fixing and making surface good as per existing complete as specified and directed.

Supply and fix for DWC high densiy polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fittings as required at site including taking down the old unserviceable pipe complete all as specified and directed.

Supply and fix Exhaust Fan of cap 300 mm sweep, AC 240 volt with louvers complete all as specified and directed. Make: Havells/Philips/Bajaj

S&F Ceiling fan 1200 mm sweep BLDC complete with all accessories including regulator as specified and directed. Make : Havells/Bajaj/Usha

Supply and fix in repair for LED bulkhead fittings luminaires with opal diffuser including LED lamp type 10W LED 6000K, lamp holder etc Cat part No-ICBH-10 of CG make or its equivalent, Make of Bajaj/Philips/ Osram, complete all as specified and directed.

S&F sheet metal powder coated versatile double door SPN distribution board, 4 way suitable for MCB’s fitted with copper bus bar rated 200 Amps, neutral link, earth bar and din rail suitable for use on 240 Volt, 50 Hz complete all as specified and directed.

Supply and fix MCB SP 6-32 Amps 240 Volts complete all as specified and directed.

Supply and fix MCB SP and neutral(SPN) 40 Amps 240 Volts complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the Galvanised iron earth wire 4.0mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agregates with 40mm thick cover of RCC (1:2:4) reinforeed with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 40x40x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering , perforated at botytom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filled 150 mm thick all around the earth plate test point made out of 40x8mm FI galvanised with fixing arrangement, funnel wire mesh and earth work in any type of soil returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

M&L UG cable XLPE insulated,armoured heavy duty electric cable with aluminium conductor,1100 Volts grade,cross section area 10 Sqmm 2 core complete laid in tranches all as specified and directed.

Shiva Builders

Walia trading co

Standard engineers

KALSI CONSTRUCTION CO