Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.0 LAccepted-Finance PASUR ERODE | ERODE | ERODE | TAMIL NADU | 1 | Accepted-Finance L1 | |
| 2 | 2₹42 L+₹38.0 L (950.3%)Rejected-Finance 5 ESWARAN KOVIL STREET PSG NAGAR IN AVALPOONDURAI TOWN PANCHAYAT ERODE DISTRICT | ERODE | TAMIL NADU | 638001 | 2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | KMR AND CO L1 | A.NAGULAN CONTRACTOR L2 |
|---|---|---|---|---|---|
| 1.00 | Preparing the Existing surface to laying the road to proper Gradient and remove the loose soil without damage the water supply and other pipe lines. The rate inclusive of all charges such as Earthwork and remove the same away from the site etc, complete as per standard specifications.Earthwork - SS 20A = 42.42 | 338 | 1m3 (One Cubic metre) | 125.5 ₹42,419 Lowest | 150 ₹50,700 |
| 2.00 | Providing Granular surface base to the required surface using murram, Granular soil of size varying from 4mm to 75mm including cost of material and cost of labour for stacking, spreading and consolidating layer by layer (Each layer not exceeding 100mm) including hire charges of Roller etc, complete as per the direction of Departmental officers. | 135 | 1m3 (One Cubic metre) | 1,560.9 ₹2,10,721.5 Lowest | 1,600 ₹2,16,000 |
| 3.00 | Providing and laying conveyed gravel filling including cost and conveyance of gravel to the work site and stacking them to the standard departmental metric gauge for pre-measurements, spreading, watering and compacting the mix in layers of thickness not exceeding 100mm compacted thickness by 80-100 KN power roller rolling to achieve the required dry density including labour charges for spreading and hire charges and fuel charges for power roller, water sprinkler and all other tools and plant, etc., complete as per clause 305 of MOST specification | 81 | 1m3 (One Cubic metre) | 289.1 ₹23,417.1 Lowest | 310 ₹25,110 |
| 4.00 | Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. | 203 | 1m3 (One Cubic metre) | 2,048.9 ₹4,15,926.7 Lowest | 2,100 ₹4,26,300 |
| 5.00 | Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications | 1,350 | 1m2 (One Square metre) | 81.8 ₹1,10,430 Lowest | 90 ₹1,21,500 |
| 6.00 | Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications | 1,350 | 1m2 (One Square metre) | 18 ₹24,300 Lowest | 25 ₹33,750 |
| 7.00 | Providing and laying tack coat of 2kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications | 4,050 | 1m2 (One Square metre) | 26.1 ₹1,05,705 Lowest | 35 ₹1,41,750 |
| 8.00 | Providing and laying 50 mm compacted thick dense bituminous macadam using 0.24 cum of 26.5-13.2 mm graded metal and 0.25 cum of 13.2-2.36 mm graded metal and 0.23 cum of 2.36 mm & below metal with 53.20 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site,spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc.,including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 505 of MORTH Rev-5 specifications. | 68 | 1m3 (One Cubic metre) | 10,188 ₹6,92,784 Lowest | 10,300 ₹7,00,400 |
| 9.00 | Providing and laying Bituminous concrete to 30mm thick using 0.13 cum of 19.00-9.50 mm graded metal and 0.17 cum of 9.50-2.36 mm graded metal and 0.26 cum of 2.36 mm & below metal with 45.27 kgs of 60/70 bitumen & 5.03Kg of Plastic waste (Total-50.30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 40mm / 30mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, Vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 507 of MORTH Rev-5 specifications. | 162 | 1m3 (One Cubic metre) | 10,487.5 ₹16,98,975 Lowest | 10,600 ₹17,17,200 |
| 10.00 | GST 18% | 1 | No | 5,98,442.09 ₹5,98,442.09 Lowest | 6,17,887.8 ₹6,17,887.8 |
Tender Value
₹40 L
EMD Value
₹40,000
Closing Date
19 Jun 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COMMISSIONER KANGEYAM MUNICIPALITY
KANGEYAM MUNICIPALITY
Restoration of BT surface at Ward No.9 Velliyankaadu Road (158009R380) in kangeyam Municipality
2025_MAWS_570112_1
398/2025/E1
Open Tender
Civil Works - Roads
Works
90 days
KANGEYAM MUNICIPAL AREAS
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹40,000
18 Feb 2026
17 Jun 2025
19 Jun 2025
17 Jun 2025
19 Jun 2025
17 Jun 2025
Amount
Preparing the Existing surface to laying the road to proper Gradient and remove the loose soil without damage the water supply and other pipe lines. The rate inclusive of all charges such as Earthwork and remove the same away from the site etc, complete as per standard specifications.Earthwork - SS 20A = 42.42
Providing Granular surface base to the required surface using murram, Granular soil of size varying from 4mm to 75mm including cost of material and cost of labour for stacking, spreading and consolidating layer by layer (Each layer not exceeding 100mm) including hire charges of Roller etc, complete as per the direction of Departmental officers.
Providing and laying conveyed gravel filling including cost and conveyance of gravel to the work site and stacking them to the standard departmental metric gauge for pre-measurements, spreading, watering and compacting the mix in layers of thickness not exceeding 100mm compacted thickness by 80-100 KN power roller rolling to achieve the required dry density including labour charges for spreading and hire charges and fuel charges for power roller, water sprinkler and all other tools and plant, etc., complete as per clause 305 of MOST specification
Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.
Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications
Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications
Providing and laying tack coat of 2kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications
Providing and laying 50 mm compacted thick dense bituminous macadam using 0.24 cum of 26.5-13.2 mm graded metal and 0.25 cum of 13.2-2.36 mm graded metal and 0.23 cum of 2.36 mm & below metal with 53.20 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site,spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc.,including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 505 of MORTH Rev-5 specifications.
Providing and laying Bituminous concrete to 30mm thick using 0.13 cum of 19.00-9.50 mm graded metal and 0.17 cum of 9.50-2.36 mm graded metal and 0.26 cum of 2.36 mm & below metal with 45.27 kgs of 60/70 bitumen & 5.03Kg of Plastic waste (Total-50.30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 40mm / 30mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, Vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 507 of MORTH Rev-5 specifications.
A.NAGULAN CONTRACTOR (BID ID -1372697)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .