Providing Internal and External electrification, one number 20 persons bed cum passenger Lift to additional building for Casualty, OP block and Operation Theatre to Government Hospital at Srivaikundam in Thoothukudi District

Amount

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 Sq.mm copper wire and making good of the concealed portion with suitable colour for concealed PVC Light point / fan point (for electronic regulator) (5 points / coil) (Higher end)

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

Supply and run of 1.5sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in existing concealed PVC pipe with necessary connection complete.

Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switch with painting of suitable colour continuous earth wire connection of 1.5 sq.mm copper wire for light point / fan point (for electronic regulator).

Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box for 5A 3 pin non interlocking flush type CS plug with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open plug point.

Supply and fixing of single box type 4' 20W LED fitting with CRCA body complete with TW round blocks on wall or ceiling with 20W LED tube with PVC unsheathed FRLS Copper leads from terminals to the fitting. (Higher End)

supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of WT bulk head fitting with guard suitable with 9W LED bulb

Supply and fixing of 24W LED square type Surface fitting (Havells Integra Nxt DL / Eq) with Aluminium (99% Purity) Sink, available in Sqaure shape. PC diffuser in white powder coated finish with built in electronic low THD (<10%) LED driver 6500K CCT; CRI ≥ 80 with 1.5 sqmm PVC unsheathead FRLS copper wire from terminals to the fitting and necessary connection complete.

supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 600 mm down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12”) sweep (light duty) AC Exhaust fan.

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.

Supply and fixing of 3 nos.6A two module socket , 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed box (GI) inflush with wall with connections. Higher End

Supply and fixing of 20Amps flush type wall and Socket 32A DP MCB complete set for AC plug in flush with wall with earth connection.

Supply and fixing of 32A Double pole MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection.[The MCB and metal enclosure should be of Higher End

Supply and fixing of 32A Four pole MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection.[The MCB and metal enclosure should be of Higher End

Supply and fixing of 3 phase Vertical type 6 way triple pole & neutral MCB distribution board in sheet steel enclosure with metal door with IP 43 protection with 100A 4 pole isolator as incoming and 4 Nos. 63A TP MCB & 2 Nos. 32A TPMCB as outgoing in flush with wall and making good of the concealed portion with earth connection.(The MCB DB and MCB should be of Higher End)

Supply and fixing of 3 phase Vertical type 4 way triple pole & neutral MCB distribution board in sheet steel enclosure with metal door with IP 42 protection with 63A 4 pole MCB as incoming and 4 Nos. 40A TP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection.(The MCB DB and MCB should be Higher End).

Supply and fixing of 4 way 7 segment Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB as incoming, 3 Nos 40A DP RCCB with 30mA sensitivity as sub incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 32A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with 1No 100A 30mA Four pole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete.

Supply and fixing of 100A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Renewal by supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion.

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion.

Supply and run of 4of6 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by6sq.mm copper wire and making good of the concealed portion with suitable colour

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion with painting of suitable colour.

Supply and Run of 4 of 25 sq.mm. PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 16 Sq.mm copper wire with painting of suitable colour

Supply and Run of 4 of 25 sq.mm. PVC insulated SC unsheathed copper conductor of 1100 V grade on 7/20 GI wire for service connection mains

Supply and run of 4x25 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains.

Supply and laying of 3-1/2 x 35sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 35sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and fixing of 100W LED Flood Light with Integrated Driver with suitable clamps and necessary connection complete

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class'B'GIpipe ofdia not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of 3 phase 100A aerial fuse unit for 3 Nos. 100A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps

DX AIR COOLED CONDENSING UNITS: Design, supply, installation, testing and commissioning of 5.5TR Nominal capacity package type Air-cooled Condensing unit fixed with energy efficient R410A Refrigerant scroll compressor along with grooved copper tube/aluminium fins air cooled condensor coil with anticorrosion coatings,liquid ,accumulator, low noise alumimium propeller condenser fan with Fan motor etc all suitably assembled neatly in heavy duty GSS sheet metal cabinet and duly powdercoated as per specification .the unit to include built in safety controls like HP/LP switch power quality protector ,in built thermal / temperature protection. (carrier/eq)

Supply, installation, testing and commissioning of 2200 cfm 5.5 TR Nominal capacity 1 circut of 5.5TR factory assembled double skin Floor mounted AHU with 3 sections(mixing, blower, coil sections) with 50mm-45kg/cum PUF Insulated detachable panels ,extruded thermal break aluminium profiles filled with PUF,panel external skin with 0.6 mm preplasticized sheet, panel internal skin with 0.6mm galvanized sheet, AMCA tested DIDW backward/forward curved centrifugal fan with EFF1 rating motor, drive arrangement with taper lock pulleys for fan and motor,

vibration isolators out of heavy duty rubberized mounts, prefilters with 3ply HDPE 50mm thick filters having an efficiency of 90% 10 mic, 6row /12FPI deep DX copper cooling coil with copper header and aluminium fins ,GI mist arrestor ,condensate coil trough with SS- 304-20G

insulated with 9mm closed cell elastomeric foam, guard for inspection door ,out let damper of aerofoil blades &PVC gears,and flexible fire retardant canvass complete with galvanized hardware. cooling coils should have independent distributers ,electronic expansion valve kit ,catch all drier. (carrier/eq)

Supply, installation, testing and commissioning of Laminar flow arrangements with HEPA filter, frames, etc., 8ft x 6ft for OT ceiling suspended provides ultra clean sterile CLASS 100 clean air and designed as per CLASS 5 of ISO 14644-1 standards with air plenum at aluminium powder coated 1mm thick coating with aluminium pleat HEPA filters & 0.3 micron 99.97% efficiency and ss 304 perforated grill with 13mm thickness XLP installation with modular hommy, frame, Aluminium, flange type, filter media, micro glass fibre, sealant, polyethelene with air flow as per standards suitable for 5.5 TR

Supply and errection of 1.5. Ton 3 STAR rated Split type Airconditioners (4500K.cal/hr) GI sheet (ABS, HIPS plastic Fitted with Hermetically,scaled compressors operating refrigerant non CFC suitable confiriming to IS 1391 (part2) 92 (AMDT .1)(except power consumption Norms) suitable,operation on 230V,50HZ single phase AC supply.

a.Mounting/Filting Indoor & Outdoor units at their respective location.

b.Laying Refrigerant pipe line of required length connecting both units after drilling hole/ holes in the wall,if required .Thickness of copper tubing shall not be less than 0.8 mm

c.Insulating the suction pipe with expanded polyethelene foam 5mm tubing.

d. Laying 25mm dia flexible pvc drain pipe to throw out the condensate water being formed in the indoor unit.

e. Leak testing the entire system unit

f. Charging Refrigerant gas in the unit

g. Suitable electric wiring & switch should be provided with in 3 meters of the location of unit. (Carrier/Bluestar/eq)

Supplying and installation of 4KVA electronic wide range automatic voltage stabilizer (V. Guard / equ. 500/ equ. ) with input range of 140 - 270 V and out put voltage cut off and 3 minutes time delay relay with demonstration.

Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit

Supply and fixing of MS stand for fixing outdoor unit.

Supply and fixing of water drain pipe line (1 inch PVC pipe).

Supply, Fabrication and erection of fabricated ducting made up of GI Sheets of 24 Gauge thickness.

Supply, Fabrication and erection of fabricated ducting made up of GI sheets of 22 Gauge thickness.

Supply and providing acoustic for initial portion of ducting with 12mm thick Fibre Glass Rigid Board covered with Tissue Paper and Aluminum Perforated Sheet

Supply and filling of R-410A Refrigerant Gas

Supply and fixing of refrigerant piping of hard drawn copper pipe of 22.20 mm size

Supply and fixing of refrigerant piping of hard drawn copper pipe of 12.70 mm size

Supply and fixing of extruded aluminium powder coated supply and return air griltes / diffusers with volume control clamper

Supply and fixing of flexible canvas connection

Supply and fixing of duct mouth clampers.

Supply and providing thermal insulation of 9mm thick vidoflex with aluminium foil

Supply, fabrication and fixing of MS channel for mounting the air-conditioning outdoor unit

Supply and providing of pipeline nitrle rubber insulation for refrigerant and drain pipe lines

Supply and providing of 0.5 Sq.mm 4 core flexible signal cable

Design, Engineering supply, fabrication, erection, testing, commissioning and handing over of 20 persons capacity Bed-cum-Passenger Gearless Lift with M/C room, speed 1 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD as per the following Technical specifications 1. Location: Government Hospital - additional building (G+2) 2.No of Lift : 1 No 3.Type of lift : Hospital Lift 4. Capacity of lift: 20 persons capacity (1360 Kgs) 5. Speed: 1.0 m/s 6. Type of Drive: Specific variable voltage variable frequency V3F drive with enhanced ride comfort and near Zero levelling functions.

7. No. of floors: (Ground + 2 floors) 8. Total Travel : 7.2 mtrs. 9. Leveling Accuracy: High level accuracy with smooth & jerk free stopping 10. Construction of Car: Car panel with High quality SS 304 grade car Neat hairline finish, S.S.304 grade hand rail, Perspex false ceiling, stretcher impact protection. 11. Position of machine: Directly above the lift well. 12. No. of landing entrance: 3 Nos (One in front only) 13. No. of car entrance : One in front only 14. Car entrance door: power operated V3F drive side opening sliding SS 304 stainless steel hair line finish. 15. Landing entrance door: power operated V3F sliding, opening 18SWG stainless steel 304 grade hair line finish with provision for emergency key.

30.Scaffolding: to be provided by lift contractor. 31. Sill angles and facia plates: to be provided by lift contractor. 32. Steel for lift machinery: to be provided by lift contractor. 33.Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by the lift contractor during the guarantee period of one year. 34. Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, inverter, under voltage protection system etc., complete with all accessories. 35. Provision of intercom with phone: To be provided by lift contractor 3 points EPABX system at three places vide 1) inside the car 2) Head room 3) at ground floor attender room 36. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. 37. Floor annunciator with music, included

38. Special features: a. Infra red door sensor with full height screen, b. Tubular S.S hand rail in cars. c. Voltage stabilizer for circuit control. d. Stainless Steel signal fixtures. e. Vandal proof S.S. Button with S.S. cover. f. SS hairline fininsih door frames for landing doors. g. VF door Register signal. h. Call Register signal. i. Stainless steel facia plate for car operating panel and landing fixtures. j. Steel ladder for machine room and ladder for lift shaft pit, k. On-Off switch for fan and light. l. Over load warning indicator with audio announcement. 39. Other standard features: Voltage stabilizer for control units, Over speed governor, phase failure and phase reversal relay alarm bell, T.Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electromagnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limits switch, main suspension ropes counter weights lifting hoist for mounting the machineries.

40. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period not less than one year. 41.Site testing in accordance with IS 14665 as amended should be carried out at the time of handing over. Necessary spares and tools required for the maintenance for a period of one year. 42. Supply of operation and maintenance manual with Necessary tools for Operation. The list of tools required should be detailed by the contractor in a separate sheet duly signed by contractor. (Johnson / KONE/OTIS/Eq) The make should be approved by the departmental officers before on work.

Supply and fixing of 3kVA single phase in & single phase out online UPS of Microcontroller based High frequency and double conversion online technology with inbuilt isolation transformer system, LCD/LED display with suitable SMF battery to provide minimum 1 hour backup along with powder coated MS Rack and interlink cables with following specifications: 1.Output Voltage Range: 208V/220V/230V/240VAC 2. Voltage THD (Linear Load):≤2% 3. Voltage THD (Non-Linear Load) : ≤4% 4. Current THD : ≤10% 5.Overload : >110%, 30s turn to Bypass mode; > 150% instant turn to Bypass mode.

6. Short Circuit protection: 5 cycles turn off inverter, no tranfer to Bypass, provide Alarm (AC mode); 5 cycles turn off inverter, provide Alarm (Battery mode), input fuse blown or breaker action. 7. Waveform: Pure sinewave 8. Transfer time: (AC mose to Battery mode - Zero) (Inverter to bypass - <4ms) 9. Efficiency : 85% to 92% 10. Noise Level: less than 50dBA @ 1 meter (with fan speed control) 11. Waranty: Two years on Electronics & one year on battery. Make and model of UPS & battery should be approved by departmental officers before used on work.

Supply and fixing of 1 No 6 / 16A two module socket, 1 No 16 A one module switch with module cover plate (plastic) on suitable module concealed box (GI) in flush with wall with connections (Higher End)

Supply and clamping of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable on post or on wall with MS clamps.

ANNAI ELECTRICALS (BID ID -1376647)

T PAULKANNU & CO (BID ID -1377460)