Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
25 Jun 2026, 6:00 pm
GE (AF) BANGALORE
Garrison Engineer (Air Force), Military Engineer Services, HQ Trg Command, IAF Campus, Hebbal, Bangalore - 560006
REPAIR TO SPECIAL FURNITURE ITEM AND REPAIR REPLACEMENT OF PLYWOOD TO EXISTING GI CHARPOY PLYWOOD TOP AT HQTC AND CHAFB
2026_MES_769714_1
8512/E8
Open Tender
Civil Works
270 days
GE (AF) BANGALORE
AS PER NIT
5 documents required · 5 mandatory
₹500
GE (AF) BANGALORE
₹60,000
Yes
4 Jun 2026
4 Jun 2026
27 Jun 2026
4 Jun 2026
25 Jun 2026
18 Jun 2026
5 Jun 2026 - 12 Jun 2026
Charpoy with hard top ( FD /E6/MAP/II/01) S&F 12 mm thick ply wood top commercial grade,synthetic resin bonded, BWR type 'A' conforming to IS 303-1989 of suitable size as per drawing including removing the existing unservicable ply wood top of Charpoy with hard top complete all as specified and directed.
S&F MS Tube Stiffeners of 25 mmx25mmx 850 mm long 16 guage to be welded and jointed to charpoy as per drawing including removing the existing unservicable Middle support MS Tube Stiffner of Charpoy with hard top.
M&L Painting of frame with two coats of black paint by preparing the surfaces after removing old paints by means of spray painting to all steel surface etc complete all as specified and directed.
Charpoy Folding with hard top (FD-388R) S&F 12 mm thick ply wood top commercial grade,synthetic resin bonded, BWR type 'A' conforming to IS 303-1989 of suitable size as per drawing in two parts including removing the existing unservicable ply wood top of Charpoy Folding hard top complete all as specified and directed.
Repairs of charpoy folding frame including tightning,replacement of old nut and bolts and rivets and welding wherever required as per trade practice complete all as specified and directed.
M&L Painting of frame with two coats of black paint by preparing the surfaces after removing old paints by means of spray painting to all steel surface etc complete all as specified and directed.
Hard bed with plytop ( FD /E6/MAP/08) S&F 12 mm thick ply wood top commercial grade,synthetic resin bonded, BWR type 'A' conforming to IS 303-1989 of suitable size as per drawing including removing the existing unservicable ply wood top of Hard Bed complete all as specified and directed.
S&F 18 mm thick both side prelaminated MDF board of size 630 x 190 mm for Head board of Hard Bed incl PVC beading 2mm thick duly hot machine pressed all around all as per drawing including removing the existing UNSV Pre-Lamiinated MDF board of Head board of Hard Bed complete all as specified and directed.
M & L 18 mm thick both side pre- laminated MDF board of size 630 mm x 300 mm for Foot board of Hard Bed incl PVC beading 2mm thick duly hot machine pressed all around all as per drawing including removing the existing UNSV Pre-Lamiinated MDF board of Foot board of Hard Bed.
Bunker Bed(FD-91/112) S&F 12 mm thick of ply wood top commercial grade,synthetic resin bonded, BWR type 'A' conforming to IS 303-1989 suitable for bunker bed all as per drawing including removing the existing unservicable ply wood top of Bunker Bed twin Bed system complete all as specified and directed.
M&L Painting of frame with two coats of black paints by means of spray painting to all steel surface after removing old paints and preparing the surfaces complete all as specified and directed.
Chair dining High back with cushioned seat (TP) S&F 12 mm thick BWR commercial ply duly fixed with 75 mm thick synethtic foam of 40 density covered with best quality tapesty cloth of approved quality including tightining the frame with bamboo pins , colour and pattern of required size as per existing size and design including removing the existing unservicable seat including 12 mm thick ply wood of Chair dining high back with cushion complete all as specified and directed. Note:- Cost of Tapestry cloth shall not be less than Rs 350/- per meter.
S&F 1st class hard wood Middle stiffner of size 25 x 40 mm by removing the existing broken Middle stiffner complete all as specified and directed.
M&L to melamine polish for Chair dining high back with cushion of approved colour and shade with spray machine after smoothening and preparation of surface as per trade practice and standard workmanship including necessary preparation and complete removal of the old polished surfaces by sand papering and removing the stains and rectifying the cracks and dents with filling materials like glue, bees wax resin etc mixed with polish of any description, width or girth to achieve glossy finish of natural teak/wallnut finish or shade and finish complete all as specified and directed. The workmanship should be as per trade practice and standard workmanship complete all as specified and directed.
GI charpoy plywood top (FD-220) S&F 12mm thick plywood commercial BWR grade ISI marked suitable for GI Charpoy with rounded edges on four corners, fixed with MS Bolts and nuts 6 mm dia 75 mm long with washers including removing the existing unserviceable plywood 12mm from GI charpoy plywood top complete all as specified and directed.
Repairs of charpoy GI frame including tightning, re-threading of both end of required size of long rail, short rail, leg etc complete all as specified and directed.
S&F flat iron 40 x 5mm welded between long rails including the welded portion grinded smoothly and apply two coat of black enamel paint over a coat of primer for entire flat iron including removing the existing unservicable flat iron complete all as specified and directed. Note: Each flat iron shall be measured as one unit.
S&F 32 mm medium grade ISI marked long rail of GI tubing including cutting, threading and bringing the GI charpoy into the original shape as shown in drawing including removing the existing unserviceable / broken long rail from GI charpoy complete all as specified and directed.
Removing the existing unserviceable / broken short rail from GI charpoy and Refixing short rails by converting long rails obtained from Sl item No 28.00 here-in-before including cutting, threading complete all as specified and directed.
Removing the existing unserviceable legs from GI charpoy and Refixing legs by converting long and short rail obtained from Sl item No 29.00 here-in-before including cutting, threading complete all as specified and directed.
S&F 6 mm thick GI medium grade check nuts suitable for 32 mm dia GI pipe all as shown on drawings including removing the unserviceable/broken check nuts from GI charpoy complete all as specified and directed.
S&F 32 mm dia GI medium grade 3 way elbow ISI marked all as specified and as shown on drg including removing the unserviceable/broken 3 way GI elbow from GI charpoy complete all as specified and directed.
Chair Computer (FD/E6/MAP/01 S&F 40mm thick existing seat of chair revolving 510 x 470mm or reqd size and covered with and including approved shade of best quality tapestry cloth as requried, including removing the existing unserviceable seat PU foam icl tapestry cloth complete all as specified and directed. Note :- Cost of tapestry shall not be less than 350/- per meter.
S&F 25mm thick existing back of chair revolving of 750 x 530mm and covered with and including approved shade of best quality tapestry cloth as requried, including removing the existing unserviceable back PU foam incl tapestry cloth complete all as specified and directed. Note:- Cost of tapestry cloth shall not be less than 350/- per meter.
S&F Tilting bolt with accessories of suitable for existing size and design including removing the existing unserviceable tilting bolt complete all as specified and directed.
S&F castor wheels heavy duty of suitable for existing size 50 mm, including removing the existing unserviceable castor wheels complete all as specified and directed.
S&f Polyurethene handle of suitable for existing size and design including removing the existing unserviceable Polyurethene handle complete all as specified and directed.
S&F best quality PVC Star base of approved quality suitable for chair revolving including removing the existing unserviceable PVC star base complete all as specified and directed.
S&F Pneumatic gas pump heavy duty best quality suitable for chair revolving including removing the existing unserviceable Pneumatic gas pump complete all as specified and directed.
Chair Writing (FD/E6/MAP/12) S&F 50 mm thick existing seat of chair writing of 500 x 490mm and covered with and including tapestry cloth by removing the existing unserviceable U foam/sponge foam complete all as specified and directed.
S&F 50mm thick existing back of chair writing of 520 x 480mm size and covered with and including tapestry cloth by removing the existing unserviceable U foam/sponge foam complete all as specified and as directed at site.
S&F Polyurethene handle of suitable for existing size and design of approved quality by removing the existing unserviceable polyurethene handle complete all as specified and directed.
Please Enable Macros to View BoQ information
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Tender_8512.pdf
Tender Documents • 0.45 MB
SOC8512.pdf
Additional Documents • 0.09 MB
BOQ_861962.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid