Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹42.3 L
EMD Value
₹1 L
Closing Date
6 Sept 2023, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
jyoti
conversion of overhead line to underground cable in aralikatti colony of ward 61 in hubli division
DMA/2023-24/EL/WORK_INDENT2700
DMA/2023-24/EL/WORK_INDENT2700
Open
Electrical
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
6 documents required · 6 mandatory
₹1,060
₹1 L
25 Aug 2023
25 Aug 2023
31 Aug 2023
conversion of overhead line to underground cable in aralikatti colony of ward 61 in hubli division
LT Feeder Piller Box with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2 8 Way
Erection of LT Feeder piller box including necessary civil works like soil excavation & concreting etc. complete. above 8 Ways
Grounding Material
Pipe Grounding GI grounding Pipe,B-class,42mm dia,2.5mtr long 3.2mm thick with bolt,nut,GI strips and washer compleete.Minimum weight of GI pipe:7.3kg.
Good Quality well burnt charcoal for grounding purposes packed in non returnable gunny bag of 30 kg
Salt Good Quality salt for grounding purposes packed in 50kg gunny bag Bescom part III
Rod type of earthing using 40mm dia 3 mtr long M.S rod as ground rod,in earth pit of 300mm width and 3300mm depth and using 50X6 mm flat welded to ground rod as terminal is connected to e...
Digging Digging of pit for providing GI Pipe type Earthing. Bescom part IV
1.1Kv XLPE or Heat resistant PVC insulated,PVC Extruded Inner sheath Armoured LT UG cable as per IS-1554(part-1 )or IS-7098 Part 1,Armouring strip thickness and resistivity as per IS-3975 24...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as
directed by the departmental staff 3x185 to 240 Sqmm
Earth work excavation Cable for cable trench of 0.5 to 0.75 Mtr. Width and Depth
upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Bo...
U G Cable 25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm)
Laying of LT UG Cable 2.5 to 25 Sqmm
16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm)
Straight Joint Straight Through Jointing Kit Suitable for 240 Sqmm, 3.5/4 Core 1.1 kV Class LTUG Cable as per IS-13573
HT Cable Joint Cable Joint and wiring (for HT Cable only) 3x185 to 3x240 Sqmm
Pothead Kit Epoxy Terminating Kit (Pothead) suitable
for 1.1 kV, LTUG Cable 3.5 x 225/240/300 Sqmm
Bescom part III
Pothead Fixing Making and Fixing pot head for HT Cable only
Heat shrinkable type 3x185 to 3x240 Sqmm
Lugs Aluminium End Terminal (Lug) 240 Sqmm
Lettering Control Panel Units Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush
Cement Concrete Road
Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenche
Releasing RCC Poles RCC/PSC Pole 9 Mtrs Long 145 KG WL & PSC pole (Stud) Dismanting of Steel/I- Beam 90% of the Pole erection charges
Releasing of 2 Pin cross arm with Insulator and Braces fixing Note:Fixing Charges in to 90% of Releasing Charges.
Releasing of 4 Pin cross arm with Insulator and Braces fixing
Releasing of V-Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing
Releasing of Street Lights Over Head Service Mains (Single Phase/Three Phase) for consumer installation and street lighting and similar work (While replacing existing Pole)
Releasing of Conductor
Releasing of Conductor
Releasing ABC Cable Releasing 11kv 3 phase Areial bunched cable 3x95+70 Sqmm
Straight Joint Straight Through Jointing Kit Suitable for
1.1 kV Class LTUG Cable as per IS-13573 16 Sqmm, 4 Core
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
2700.doc
Tender Document • 1.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .