Revitalizing Central Business District Historic Core of The State Capitals Major Cities Reform Component of Scheme for Special Assistance to States for Capital Investment SASCI 2025 26

Amount

DISMANTLING

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges

Dismantling tile work in floors and roofs for any thickness laid in cement mortar including stacking stacking of serviceable and disposal of unserviceable material upto all leads and lift as per direction of Engineer-In-Charge.

EXCAVATION

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains, including dressing of sides and ramming of bottoms, including getting out the excavated soil/ordinary rock and disposal of surplus excavated soils upto all lead and lift as per direction of Engineer In Charge..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level all work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

FORMWORK:Centering and shuttering including strutting, propping etc. and removal of form work for including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Columns, piers, abutments, pillars, posts and struts

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etcetera.

Stairs, (excluding landings) except spiral staircases

RCC WORKS

Providing and laying design mix reinforced cement concrete of M-25(M-Twenty five milimetre) grade, stone aggregate 20 mm (twenty millimetre) nominal size) to obtained the minimum crushing strengh of 25 N/mm2./(Twenty five Newton per milimetre Square)with minimum cement content, not less than 400 kg. /cubic metre (Four hundred kilogramme ) per cubic metre ) as per approved design mix including pumping of concrete to side of laying in all work Foundation & footings bases of columns and the like and mass concrete excluding the cost of centering, shuttering, finishing and reinforcement upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position specified grade of M-25 design mix graded stone aggregate 20 mm (twenty millimetre) nominal size to obtained the minimum crushing strengh of 25 N/mm2./Twenty five Newton per milimetre Square)with minimum cement content, not less than 400 kg. /cubic metre (Four hundred kilogramme ) per cubic metre ) as per approved design mix including pumping of concrete to side of laying in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera. above plinth level up to all floor level, excluding cost of centering, shuttering, finishing and reinforcement including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying design mix reinforced cement concrete of M-25 grade, stone aggregate 20 mm (twenty millimetre) nominal size) in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement with graded stone aggregate 20 mm (twenty millimetre) nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing of expansion joint, floor Joint of 40 mm gap, system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning/self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and arrangement that freely rotates / moves in all directions. The Self-centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer-in-Charge. (Material shall confirm to ASTM 6063).

Providing and fixing sheet covering over expansion joints with iron screws as per design, Aluminium fluted strips 3.15 mm thick, 150 mm wide incuding carriage of materials upto all leads and lifts as per direction of Engineer in Charge

STEEL REINFORCEMENT

Steel reinforcement (TATA /SAIL / JINDAL PANTHER of (JSPL)Tisco,RINLshyam steel make for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete work including cost of binding wire upto all floor level TMT of grade Fe-500D or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

MASONARY WORKS

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes in Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one sand : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

JOINERY WORK

Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Providing and fixing factory made uPVC sliding glazed window above 1.8m in height comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge..Using R4 series for three track three panelwith frame (115mm & above) x (45mm & above) & both glazed and fly screen sash (44mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height above 1.8m)For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door/window comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable

Providing and fixing galzing in uPVC/ aluminium door, window, ventilator shutters and partitions etc. with beading complete as per design and directions of engineer in charge; with toughened glass of 6mm thickness weight should not be less than 15.0 kg/sq.m

Providing and fixing flyproof stainless steel grade 304 wire gauage with .5mm dia wire and 1.4mm wide aperture with for uPVC door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and as per the directions of Engineer in charge ( cost of beading shall be measured in basic item)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat of size 65mm X100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

Providing and fixing 35mm factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Providing and fixing 12mm thick prelaminated particle borad with decorative lamination on both sides, flat pressed threelayer of graded wood particle board of approved make (Action Tesa/ century/ Kitlam/kitply/ greenply) congorming to IS 12823 Grade 1 Type II, in panelleing fixed in aluminium doors, window shutters and partitions frame with CP brass/ stainless steel screws etc. complete as per architectural drawings and directions of Engineer in Charge

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI IS 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. Each complete as per the direction of Engineer-in-charge.

FLOORING /CLADDING

Providing and fixing 19mm thick granite sadar ali/ black granite/ Red Lakha/ Lavender Blue granite gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread or riser of steps, kitchen platforms, vanity counters, window cills, facias and similar locations of required size approved shade colour and texture laid over 20mm thick base of cement mortar 1:4, jonts treated with white cement mixed with matching pigment, epoxy touch us, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. at all levels

Providing and fixing 19mm thick granite sadar ali/ black granite/ Red Lakha/ Lavender Blue of required shade. Granite stone in combination 80% polished and 20% unpolished slab with 50mm wide flaming band near uniform double round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread or riser of steps, kitchen platforms, vanity counters, window cills, facias and similar locations of required size approved shade colour and texture laid over 20mm thick base of cement mortar 1:4, jonts treated with white cement mixed with matching pigment, epoxy touch us, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. at all levels

Providing and fixing 19mm thick granite sadar ali/ black granite/ Red Lakha/ Lavender Blue of required shade in riser of steps, skirting, dado and pillars laid on with special adhesive over 12mm thick bed of cement mortar 1:3 including pointing in white cement with an admixture of pigment to match the stone shade including rubbing and polishing complete including carriage of material to all lifts and leads etc..

Providing and fixing Ist quality vitrified wall tiles size (300x450x10)mm or more, conforming to IS: 15622 , of approved make (kajaria, NITCO, Somany, Orient, RAK, Johnson), in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer In Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying d vitrified floor tiles in size of (600x1200x10-12) mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make (kajaria, NITCO, Simpolo, RAK, Johnson), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments and a touch of epoxy etc., complete.

Providing and laying factory made chamfered edge 150 mm x 150 mm coble stone block (square natural granite paving stone size 6"x6" thickness :90-110mm ) in verious colour so as to give a specified pattern as given by the architect concerned in grey, black, red , yello, greenish yellow colour whichever is required as per specification in foothpath , parks, lawns, drive ways or light traffic parking etc. on required strength, thickness and size/shape, compacting and proper embedding /laying of cobble stones, filling the joint with sand and cutting of cobble stones as per required size and patterns, finishing and sweeping extra sand as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

STAINLESS STEEL RAILING

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

FALSE CEILING

Providing and fixing plaster of Paris (gypsumanhydrous) ceiling for all floor level, over hot dipped galvanized steel sections(galvanized @120grams/sq.m), both side inclusive consisiting of main "T" runner with suitably spaced joints to get required length of size 24X38mm made from .3mm thick sheet on desired grid with 10mm gap in betweenand reinforced with rabbit wiremesh fixed to GI frame complete as per architectural drawings and approved pattern including carriageof material with all leads, lifts and other incidentals, as per approvedspecifications, drawngs, designand as dircted by the Engineer in Charge.

WATERPROOFING

Providing and laying waterproofing treatement to vertical and horizontal surfaces of depresses potions of WC kitchen and the like consisiting of:1) 1st course of applying cement slurry @4.4 kg/sq.m mixed with waterproofing compound conforming to IS 2645 in recommended portions including rounding off junction of vertical nad horizontal surface. 2) 2nd course of 20mm cement plaster 1:3 mixed with wterproofing compound in recommnded portions including rounding off off junction of vertical and horizontal surface. 3) 3rd Course of applying blown or residual bitumen appliedhoa at 1.7 kg per q.m. 4) 4th course of 400micron thick pvc sheet.(Overlaps at joints of PVC sheet should be 100mm wide and pasted on each other with bitumen @1.7kg per sq.m

STRUCTURAL STEEL

Structural steel work riveted, bolted or welded in buill up standard/hollow sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (TATA, Jindal (Hisar) Prakash Steel, Bhushan Industries) including carriage of material upto all leads and lifts and as per direction of Engineer In Charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with repainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per approved brand (TATA durashine) and direction of Engineer-In-Charge.

Providing and fixing Gutter (600 mm (six hundred millimetre) over all girth) precoated sandwich puff roofing with top skin of 0.60mm (zero point sixty millimetre) thickness prepainted profiled steel sheet(size, shape and pitch of corrugation as approved by Engineer-in-charge) make of TATA Durashine made of cold rolled steel coil having a puff depth 50mm (Fifty millimetre) rock wool and interior skin of prepainted galvanised steel sheet roofing accessories 0.60 mm(zero point sixty millimetre) (+0.05 %) ( zero point zero five percentage)total coated thickness, Zinc coating 120 (one hundred twenty ) grams per sqm as per IS: 277, in 240 (two hundred forty)mpa steel grade, 5-7 (five to seven ) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (fifteen to eighteen) microns using self drilling/ self tapping screws complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted hooks, bolts and nuts complete with all accessories as required as per the direction of Engineer-In-Charge.

Providing and fixing ridges or hips 60 cm wide overall with 0.60mm thick preprinted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5microns primer coating + backcoat of polyster of 5 microns over 5microns primer coating i/c fixing with prepainted hooks, bolts and nuts complete with all accessories as required as per the direction of Engineer-In-Charge.

Providing and fixing M.S. BP Sheet 1.66mm to 2.00 mm thick in eaves board/facial/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately).

Providing and fixing 110mm ( one hundred ten millimetre) dia of Diplast ,prince supreme finolex make unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

PLASTERING

Providing and plastering 15mm cement plaster in cement mortar 1:6( 1 cement : 6 sand) in single coat on the brick/stone/ concrete walls for interior plastering upto all floor levels including arrises, internal rouded angles, chamfers and/or rounded angles and finished even and smooth(including all type design and pattern) with carriage of materials upto all leads and lifts and scaffolding as per need as per Engineer in Charge

Providing and plastering 15mm to 20mm cement plaster in cement mortar 1:6( 1 cement :6 sand) in single coat on the rough side of brick/stone/ concrete walls for exterior plastering upto all floor levels including arrises, internal rouded angles, chamfers and/or rounded angles and finished even and smooth(including all type design and pattern) with carriage of materials upto all leads and lifts and scaffolding as per need as per Engineer in Charge

PAINTING

Providing and applying white cement based putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Painting two coats with Premium synthetic interior emulsion (PLASTIC PAINT)based water thinnable sealer of approved brand and manufacture (Allteck/ Asian paints/ ICI Nerolac) on wet or patchy portion of plastered surfaces including carraige of materials upto all leads and lifts as per Engineer-In- Charge.

Finishing walls with100% Premium Acrylic Smooth exterior paint of required shade having VOC less than 50gm/litre and UV resitance as per IS 15489:2004, Alkai and fungal resistance dirt resistance :-New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

WATER SUPPLY AND SANITARY INSTALLATION

Providing and fixing high pressure 110 mm diametre PVC pipe pressure shall not be less than 4kg/cm2 approved make (Finolex, Vectus) ISI Marked including fixing with approved adhesive complete. .

Providing and fixing high pressure 150 mm diametre high pressure pipe approved make (Finolex, Vectus) ISI Marked including fixing with approved adhesive complete.

Providing and fixing high pressure 75 mm diametre highpressure pipe approved make (Finolex, Vectus) ISI Marked including fixing with approved adhesive complete.

Providing and fixing 150mm dia PVC Plain bend ISI Marked including fixing with approved adhesive complete..

Providing and fixing 110mm dia PVC Plain bend ISI Marked including fixing with approved adhesive complete.

Providing and fixing 75mm dia PVC Plain bend ISI Marked including fixing with approved adhesive complete.

Providing and fixing 110mm dia PVC door bend ISI Marked including fixing with approved adhesive complete.

Providing and fixing 110mm dia PVC door bend with oval acess door, insertion rubber washer 3mm thick bolts and nuts ISI Marked including fixing with approved adhesive complete.

Providing and fixing 110mmX75mm PVC floor trap including SS grating of self cleansing design including fixing with approved adhesive,cost of cutting and making good of the walls and floors etc. complete

Providing and fixing 150mm dia PVC Collar ISI Marked including fixing with approved adhesive complete.

Providing and fixing 110mm dia PVC Collar ISI Marked including fixing with approved adhesive complete.

Providing and fixing PVC Clamps ISI Marked of approved design with steel screw and rawl plug complete:150mm dia pipe

Providing and fixing PVC Clamps ISI Marked of approved design with steel screw and rawl plug complete:110mm dia pipe

Providing and fixing PVC Cowl ISI Marked of approved design with steel screw and rawl plug complete:75mm dia pipe

Providing and fixing PVC Cowl ISI Marked of approved design with steel screw and rawl plug complete:110mm dia pipe

Providing and fixing of square mouth SW gully trap class SP-1 complete with CI grating brick masonary chamber with water tight CI cover frame of 300x300mm size (inside) the weight of cover to be not less than 4.5 kg and frame not to be less than 2.70kg as per standard design: 100x100mm size P type, with burnt clay FPS ( non modular bricks of class 7.5

Providing and fixing floor mounted , white vitreous china single piece, double traps syphonic EWC of approved brand/make of (jagaur, Cera) shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts, gaskets etc, including making connection with P/S trap complete in all respect as per direction of engineer in charge

Providing and fixing of water closet squatting pan(530x410mm) (Indian type WC pan)with 100mm sand cast iron P or S trap, 10 litre low level PVC flushing cistern including flush pipe with manually controlled device(hand lever) conforming to IS:7231 with al fittings and fixtures complete, including cutting and making good the walls floors wherever required for the same with the integral foot rests of approved make( Hindware, Cera, Jaguar), including carriage of material to all leads and lifts as per the direction of the engineer in charge

Providing and fixing Health Faucet ABS with rubbit cleaning system, flexible tube upto 1.25m long PVC flexible tube and ABS wall hook to extended wall mounted type WC of quality and make( Jaguar) as approved by engineer in charge

Providing and fixing 570x420x195mm FLS-WHT-5601 counter top wash basin with CI brackets, 32mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required ( Florentine series of jaguar or its equivalent)

Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40mm, including painting of fittings and brackets cutting and making good the walls wherever required. Kitchen sink with drain board(510x1040mm) bowl depth 250mm of approved make

Providing and fixing of 15mm nominal bore CP brass long body bib cock with mixer for kitchen sink of approved quality(jaguar) conforming to IS standards and weight not less than690 gms including carriage of material up to all leads and lifts as per direction of Engineer in Charge

Providing and fixing of 15mm nominal bore CP brass long body bib cock with mixer for wash basin of approved quality(jaguar) conforming to IS standards and weight not less than690 gms including carriage of material up to all leads and lifts as per direction of Engineer in Charge

Providing and fixing 15mm nominal bore CP brass stop cock(concealed) of standard design and of approved make conforming to IS 8931 including carriage of material up to all leads and lifts as per direction of Engineer in charge

Providing and fixing 32mm dia PVC waste pipe for sink or wash basin including PVC waste fittings complete, including carriage of material up to all leads and lifts and as per direction of Engineer in Charge

Providing and fixing of 20mm nominal size gunmetal gate valve with CI wheel of approved quality including carriage of material to all leads and lifts and as per direction of Engineer in Charge

Providing and fixing 15mm nominal bore CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, including carriage of material to all leads and lifts and as per direction of Engineer in charge

Providing and fixing Poyethelene- Aluminium-Polyethylene PE-AL-PE composite pressure pipes conforming to IS-15450, UV stabilized with carbon black having thermal stabity for hot and cold water supply, capable to withstand the temperature upto 80 degree C, including all special fittings of composite material (engineering plastic bend and brass inserts wherever required) eg. elbows, tees, reducers couplers, connectirs etc. with clamps at 1m spacing. This includes the cost of cutting chases and including testing of joints complete with carriage of material up to all leads and lifts and as per direction of Engineer in Charge

1216 (16mm nominal bore)

1620(20mm nominal bore)

Providing and fixing of beveled edge mirror of superior glass for public toilet with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete

Providing and fixing of CP brass paper holder including carriage of material up to all leads and lifts and as per direction of Engineer in Charge

Providing and fixing unplasticized PVC connection pipe with brass unions 45cm in length 15mm nominal bore including carriage of material in all leads and lifts and as per the directions of Engineer in Charge

Providing and fixing brass full way valve with wheel including carriage of material etc.

15mm dia bore

20mm dia bore

Providing and fixing PVC TEE single branch i including carriage of material in all leads and lifts and as per the directions of Engineer in Charge

Providing and fixing PVC TEE double equal branch, insertion rubber washer 3mm thick bolts nuts complete including fixing with approved adhesive etc. including carriage of material in all leads and lifts and as per the directions of Engineer in Charge

Providing and fixing of PVC shoe 150mm dia ISI marked including fixing with approved adhesive complete

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. with carriage of material up to all leads and lifts and as per direction of Engineer-In-Charge.

Providing and laying of cement concrete 1:4:8 ( 1 cement: 4 sand and 8 aggregate) bedding for PVC sewer pipes curing complete including the carriage of materials inall leads and lifts and as per direction of Engineer in Charge

Construction of brick masonary manhole in cement mortar 1:4 with RCC top slabwith 1:2:4 mix, foundation concrete mix 1:4:8, inside plastering 12mm thick with cement mortar 1:3 finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 finished with a floating coat of neat cement complete as per standard design. Inside size 1200x90mm and 900mm deep including SFRC heavy duty manhole cover circular shape 560mm dia and 125mm rhickness of precast RCC manhole cover with frame H.D-20. With common burnt clay FPS(non modular) bricks of designation 7.5

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms

PARVEEN KATNA (BID ID -585124)

PANKAJ KUMAR (BID ID -585242)