CA NO GE/ND-48/2022-23 WELCOME MAINT, PERIODICAL SERVICES AND MISC B/R WORKS AT OFFRS MD ACCN IN SANGLI APARTMENT, CERTAIN BUILDINGS AT RAKSHA BHAWAN AND NDC AND REPAIR/MAINT OF SEWER LINE, MANHOLES, CLEANING OF SEWER APPURTENANCES ANDSEWER LINE IN

Amount

M&L for preparation and Complete removal of existing treatment with mechanical device of any description on old decorated wall/vertical surfaces by means of washing/rubbing/scrubbing down including removal of scrubbed materials to out of MoD land and applying two coat of oil bound distemper on old prepared surface of wall/vertical surface including 1.5 mm putty and alkali resistant primer complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing and applying two coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.

M&L for preparation of painted plastered surfaces of walls of any description and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for French polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old work with one or more coat complete all as specified and directed.

M&L preparation of old painted surfaces of wood or wooden based surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.

S&F glazed ceramic tiles in vertical surfaces 350X250X7/450X300X7 mm coloured tiles set and jointed in neat cement slurry or pointed in white or coloured to match over and incl 15 mm thick rendering in CM 1:4 including Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish out of MoD land complete all as specified and as directed. complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed in CM 1:6 as in floor including Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish out of MoD land complete all as specified and as directed. complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick (square /rectangular) polished light shade, area of each tiles n.exc 0.36 sqm over and incl 20 mm thick CM 1:6 screed bed in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement match including Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish out of MoD land complete all as specified and as directed. complete all as specified and as directed.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off on wall of up to G+11 stories bldgs. etc complete all as specified and directed.

M&L for rendering 15mm ready mix plaster on brick or concrete surface finished even and smooth up to G+11 stories bldgs. etc complete all as specified and directed.

M&L 15mm thick rendering on fair or unfair faces of brick work or concrete surfaces in CM 1:4 finish even and smooth without using extra cement including Taking down cement plaster on brick wall surfaces or concrete wall surface on roof parapet wall surfaces or external surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specified and directed.

M&L 15mm thick rendering on fair or unfair faces of brick work or concrete surfaces in CM 1:6 including Taking down cement plaster on brick wall surfaces or concrete wall surface or internal wall surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specified and directed.

M&L 10 mm thick rendering on concrete surface in cm 1:3 as in ceiling finished even and smooth with out using extra cement including Taking down cement plaster of ceiling surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of white wash on walls complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over 1.5 mm thick putty and a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilings and applying two coats of oil bound distemper over 1.5 mm thick putty and one coat of white washing complete all as specified and directed.

Taking down chowkhats or frame of any description exc 1.5 Sqm but not exc 4 Sqm each with shutters(without taking off shutters from the frame) complete all as specified and directed.

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides complete all as specified and directed

M&L 2nd class hardwood plain, solid, straight chowkhats and frames, wrought frames rebated on the solid rounded or chamfered put together with glue pinned at joints including three no's of hold fast both sides complete all as specified and directed.

Taking down chowkhats or frame of any description n.exc 1.5 Sqm each with shutters(without taking off shutters from the frame).

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (20mm graded crushed stone aggregate) as in hold fast, lintel, steps and bends complete all as specified and directed.

S&F butt hinges 100 mm long medium weight cold rolled SS with SS hinges pin finished bright and smooth complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, length of bolt 300 mm and fixed complete all as specified and directed.

S&F Aluminium alloy, anodised barrel tower bolt of extruded section 200 mm long complete all as specified and directed (ISI marked)

M&L for two coats of synthetic enamel paint on new wooden surfaces over a coat of pink primer incl preparation of surfaces over 10 cm width of girth complete all as specified and directed

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repair vitreous china wash down water closet (pedestal pattern) complete with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern complete all as specified and directed (Make:HINDWARE/PARRY WARE/CERA) Ist quality.

S&F in repair vitreous china wash basin of size 540X400mm including brass chromium plated waste coupling for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead and other end fixed, PVC waste pipe, GI 40mm dia ,med grade, pipe with fittings fixed in wall connected to floor trap for drain out complete all as specified. (Make:HINDWARE/PARRY WARE/CERA) Ist quality.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed on wall tiles complete all as specified and directed.

S&F as in repair chromium plated shower roses of size 125 mm with or without swivel joints any type including chromium plated shower arm fixing to steel pipe and union completed. (Make : ZIM/PARKO/KINGSTON)

Taking down or down steel tubing and connection incl cleaning for refixing or removal to store for 15mm dia pipe.

S&F GI tubing medium grade galvanised with all fittings fixed complete to walls concealed and ceilings or laid in floors for 15mm dia pipe concealed/open including all fittings complete all as specified and directed

S&F in repairs 25mm bore gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed

S&F in repair stop valves for 15mm dia pipe fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screw down high pressure crutch or butterfly handle for pipe or unions over and including extension piece and CP cap complete all as specified and directed.

M&L for cleaning sunken portion of slab (Bottom & sides) and providing water proofing treatment as under :- (a) Providing min 3" concave coving with PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate admixed with WPC complast X 421 IC . Cement slurry admixed with bonding compound Nitobond AR to be used for bonding of coving with RCC member. Covering CI pipes with PCC 1:2:4 type B-0 using 20mm graded stone aggregate admixed with integral WPC complast X 421 IC (Fosroc Chemicals India Ltd). (b) Drilling 50mm deep holes at a distance of 1m c/c and cleaned with water and air, fixing nozzles of 12mm dia on drilled holes, injecting non shrink cement slurry at a pressure of 40 psi and nipples plugged with quick setting compounds. (c) Applying 2 full coats of brush bond acrylic emulsion based elastomeric water proofing coating after the primer with a min time gap of 4-6 hrs between 1st & 2nd coat. (d) Applying 15mm thick plaster in CM 1:4 admixed with WPC complast X 421 IC after ponding test for a period for 72 hours of sunken floor . (e) GI tubing 40 mm dia of medium grade for spout of 600 mm long for each sunken floor. (f) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 Kg / Sqm as a bonding layer over finished plaster surface incl cleaning the surface . (g) Over the coat of bitumen bonding layer as above APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm)and 3 mm thick reinforced with polyester non wove fabric, unrolled and bonded completely to the substrate with side over lap of 75 mm or end over lap of 100 mm. The overlaps are then sealed/ fused by flam technology method as per manufacture instruction. Note : The work shall be executed by authorised manufacturers/applicator only.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed

M&L for lean concrete 1:5:10 type E2(using 40 mm graded aggregate) as in filling of sunken portion complete all as specified and directed.

M&L PCC (1:3:6) type C-2 (40mm graded crushed stone aggregate) 100mm thick including finishing even and smooth with out using extra cement.

M&L 40 mm thick PCC 1:2:4,type B-1 using 20mm graded aggregate mixed with water proofing compound @ 3% by wt of cement as in sunken floors. (water proofing compound to be measured separately).

Supply only liquid water proofing compound.

S&F in repairs, 15 mm bore chromium plated health faucet brass of first quality with flexible tube of size 1.0 mtr long and wall hooks, complete all as specified and directed. Make: Cera/Parko/Somany.

S&F in repairs, brass chromium plated toilet paper holder with CP brass screws, complete all as specified and directed. Make: Cera/Parko/Somany.

S&F in repairs, 10 Ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. Make: Cera/Somany.

S&F in repairs, stainless steel sink, 1.00mm thick for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make - Diamond/Nirali

S&F in repairs, 15mm bore brass CP Wall mixer tap for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs MS powder coated drapery curtain rods 25mm dia of approved quality fixed in brick/concrete wall complete all as directed and specified

S&F in repairs, MS powder coated decorative drapery curtain end brackets/supports 25mm dia of any description complete all as specified and directed

S&F in repairs, elegant PVC mirror cabinet with towel rails of size 475mm X 500mm X 150mm complete all as specified and directed .

S&F in repairs, 15 mm bore chromium plated fancy type two way angle valve with elegant knob screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type long body bib taps with elegant knob screwed down high pressure complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type two way bib taps with elegant knob screwed down high pressure complete all as specified and directed.

S&F in repairs, 18/19 mm thick prelaminated particle boards, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed.

S&F in repair stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or galvanised wire staples complete all as specified and directed .

S&F 5.5 mm thick plain sheet glass ordinary quality and glazing in metal frame in square exc 0.50 sqm in each pane including hacking out old broken glass(any thickness,size,quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed

M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed

M&L for preparation of old decorated surfaces of ceilings and applying one coat of white wash complete all as specified and directed

M&L for applying 3mm thick JK / Birla wall putty as per manufactures instructions, surfaces to be finished even and smooth complete all as specified and directed

M&L for preparation of old decorated distempered surfaces of walls and applying one coat of oil bound distemper including cornices etc complete all as specified and directed

M&L for preparation of old decorated distempered surfaces of ceilings and applying one coat of oil bound distemper including cornices etc complete all as specified and directed

M&L for preparation of old painted surfaces of any description over 10cm girth or width, not other wise described and applying one coat of plastic emulsion paint on wall/ceiling complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of exterior emulsion first quality (APEX ASIAN/ Weather coat (BERGER)/ Weather shield (ICI) or equivalent (as approved) of approved colour including preparation of existing treated surfaces complete all as specified and directed.

M&L for one coat of Asian paint touch wood polishing including cleaning and preparing the surfaces filled with wood filler in disturbed surfaces where ever required on old works complete all as specified and directed

M&L 10mm thick rendering on with ready mix plaster ceiling surfaces smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering with ready mix plaster on external surfaces of wall face of brick work or concrete surface (in patches) finishes even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface & applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed.

M&L for preparation of new plastered surface & applying two coats of distemper oil emulsion on ceilings over a coat of alkali primer complete all as specified and directed.

M&L for cleaning existing chequered concrete tile/ paver blocks and providing PU coating of approved colour pattern and finished to glossy/glare finish complete all as specified and directed.

Cleaning, Flushing of chocked and desilting of outdoor sewage lines n. exe 300mm internal diameter of any depth upto three meter. The cleaning shall be carried out with mechanized operation by means of diesel/electric operated vehicle mounted hydraulic operated high pressure suction cum jetting machines fitted with pump of requisite capacity and the sludge sucked out with super sucker machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. the sludge deposited in the sewage line shall be fully cleaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipment and with strict supervision complete all as directed. Note:- (a) The service provider/contractor during the mechanised operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) Manual cleaning operation/ scavenging is prohibited. (c) The unit rate quoted by the contractor shall deem to include the cost of providing skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/stilt/liquid/mud and sand etc.

Desludging of existing manholes of depth upto 2 mtr (vol of MH exc 0.20 cum but not exc 2.88 cum)for liquid, solids and slurry material by mechanical means using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc removed to outside the MoD land/premises at any distance all as directed by Engr-in-charge including loading, unloading, digging out pit of any size in any type of soil, slurring sludge/stilt/spoil/mud etc into the pit and spraying bleaching power over the entire surface complete. Note:- (a) The service provider/contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with mechanised operation by means of jetting machines and the sludge sucked out with super sucker machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour and skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transportation arrangements.

Desludging including dewatering of septic tank/soak well in dia/ depth and manholes above 2 mtr in depth for liquid and slurry material and removing the sludge from the tank by mechanical using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc out side the MoD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, slurring sludge/silt/spoil/mud tec into the pit and spraying bleaching powder over the entire surface complete. Notes:- (a) The service provider/contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with mechanised operation by means of jetting machines and the sludge sucked out with super sucker machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/ scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour 9skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transportation arrangements. (e) The measurement shall be included with depth of water and sludge/silt/mud.

Cleaning of manhole and removing the blockage sludge from manhole by manually with the help of bamboos/rods/pipes including rodding and flushing the water and dispose off the sludge out side of MoD land complete all as directed at site for any size, description of manhole up to 1.5 m internal depth.

Cleaning of sewer line and removing the blockage by manually with the help of bamboos/rods/pipes including rodding and flushing the water and dispose off the sludge out side the MoD land upto 200 mm dia pipes complete all as specified and directed.

Cleaning of Gully trap, Nahni trap, Floor trap, WC,WHB,Urinal and sink by removing the sludge disposed off from out of defence land by manually or mechanically cleaned with water complete all as specified and directed.

Excavation in trenches in any type of soil (Soft/disintegrated) n. exc. 1.5 M wide and n. exc. 1.5 M in depth for foundation for manholes/shafts or sewer line etc. n. exc. 10 sqm on plan & n. exc. 1.5 M in depth & getting out soft loose soil complete all as specified.

Demolition of cement concrete in ground floor and pavings not exc 15 cm in thick below or above ground level complete all as specified and directed

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete)set in cement mortar & removing demolished material out side defence land complete all as directed. (Bore of pipe 100mm).

M & L for SGSW drain pipe grade 'A' 100mm bore (internal) including laying in trenches and jointing in cement & sand mortar 1:2 & testing complete all as specified.

M & L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregated) as in bed including packing under & haunching against sides of SGSW drain pipe 100mm bore after they are laid & tested complete all as specified.

Returning filling in including spreading levelling, watering and well ramming soil in layers n. exc. 25 cm thick complete all as specified.

Removing excavated materials/surplus soil out side of defence land up to a total distance of 1.5 Km complete all as directed by Engineer-in-charge.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar .

M & L for brick work with sub class B bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 all as specified and directed.

M & L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in benching, copings, channels, slightly chamfered or rounded on edge including necessary use of form work complete all as specified & directed at site.

Rendering 15 mm thick in cement mortar 1:4, on fair faces of brick work of sewer chamber or cement concrete surfaces, finished even and smooth without using extra cement.

S&F for MS framed brackets of angle iron or of flat iron with hold fasts etc as directed incl necessary welding etc complete for manholes and covers confirming to Fe-410-0 or Fe-310-0.

S&F precast RCC 1:2:4 manhole covers slabs any size, thickness with 3 mm thick FL around cover slab complete all as specified Make PPRC, polycrete including reinforcement as per manufacture design with frame complete all as specified and directed.

Cutting into existing manholes for connecting new drain making good to pipe and rendering cutting out existing benching for and forming channel (1/2 or 3/4 section) in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate finishing smooth and reframing benching as required for 150/200 mm dia pipes complete all as specified and directed.

S&F for Cast Iron trap ''P'' for cast iron pipe of size 100mm, fixed in repair.

M&L for Cast iron floor trap of size 75mm, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4:), fixed in repair.

S&F as in repair salt glazed stone ware gully trap of size 180X150 mm square or rounded mouthed,type "P".

Dismantling of cast iron or reinforced concrete drain pipe 100mm bore, jointed in cement motor and taking out of trenches if required

S&F Cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in trenches or in floors of size 100 mm bore

S&F Cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in trenches or in floors of size 75 mm bore.

S&F Cast iron bends (any radius) with ducks foot or heel rest of size 100mm bore of pipe.

S&F Cast iron bends (any radius) with ducks foot or heel rest of size 75mm bore of pipe.

S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 100mm bore pipe complete all as specified and directed.( Fixed in repair)

M/S SONU ENTERPRISES

BEHAL TRADERS

B Kumar and Co

M/S MSD & Associate

M/s Arihant Builders

NEETU TRADERS (INDIA)

MB Enterprises