8939-E8

Amount

WOODEN FURNITURE

REPAIR TO CHAIR DINING/CBB (FD - 279) Removing/ taking out carefully existing unserviceable broken back leg of the chair dining / CBB of any description in any position & replacement of the same with new back leg of Ist class hard wood (teak wood) made to shape, fixed in position all as shown on drawing complete all as specified and directed.

All as per item No.1.10 here-in-before but for front leg.

All as per item No. 1.10 here-in-before but replacement of side rail with Supply and Fixing new side rail made out of Ist class hard wood (teak wood) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

All as per item No. 1.10 here-in-before but replacement of front and back rail with Supply and Fixing new front or back rail made out of Ist class hard wood (teak wood) with holes for weaving. (The spacing of holes shall match with the existing rail on other side).

All as per item No 1.10 above but replacement of stiffener with Supply and Fixing new stiffener made out of Ist class hard wood (teack wood) complete all as shown on drawings.

All as per item No. 1.10 here-in-before but replacement of back strip with Supply and Fixing new back strip made out of Ist class hard wood (teack wood) complete all as shown on drawing.

All as per item No. 1.10 here-in-before but replacement of rubber ring with Supply and Fixing new hard rubber ring under the leg, superior quality with steel screw of size 20mm long complete all as shown on drawings and directed.

REPAIRS TO CHAIR WRITING/CBA (FD - 279, FD - 280) Removing/taking out carefuly of old existing unserviceable/broken back leg of chair writing/CBA of any description, in any position & replacement of the same with new back leg made of Ist class hard wood (teak wood) made to shape, fixed in position all as shown on drawing, polishing of new existing portion, specified and directed.

All as per item No. 8.00 here-in-before but for front leg

All as per item No. 8.00 here-in-before but for replacement of side rail with Supply and Fixing new side rail made out of Ist class hard wood (teak wood) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

All as per item No. 8.00 here-in-before but replacement of front and back rail

All as per item No. 8.00 here-in-before but replacement of back strip with Supply and Fixing new back strip made out of Ist class hard wood (teack wood) complete all as shown on drawing and directed.

All as per item No. 8.00 here-in-before but replacement of Arm rest with Supply and Fixing new arm rest made out of Ist class hard wood (teack wood) complete all as shown on drawing and directed.

All as per item No. 8.00 here-in-before but replacement of stiffener with Supply and Fixing new stiffener made out of Ist class hard wood (teak wood) complete all as shown on drawings and directed.

All as per item No. 8.00 here-in-before but replacement of rubber ring with Supply and Fixing new hard rubber ring of superior qualaity under the leg with steel screws of size 20mm long complete as shown on drawing and directed.

REPAIRS TO CHAIR EASY (FD - 229) Removing/taking out carefully of old existing unserviceable/broken back leg of chair Easy of any description, in any position & replacement of the same with new back leg made of Ist class hard wood (teak wood) made to shape, fixed in position all as shown on drawing, polishing of new existing portion, complete all as specified and directed.

All as per item No. 16.00 here-in-before but for front leg

All as per item No. 16.00 here-in-before but for replacement of seat side rail with Supply and Fixing new side rail made out of Ist class hard wood (teak wood) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

All as per item No. 16.00 here-in-before but replacement of seat front and back rail.

All as per item No. 16.00 here-in-before but for replacement of back side rail with Supply and Fixing new back side rail made out of Ist class hard wood (teak wood) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

All as per item No. 16.00 here-in-before but replacement of back top and bottom rail.

All as per item No. 16.00 here-in-before but replacement of Arm rest with Supply and Fixing new arm rest made out of Ist class hard wood (teak wood) complete all as shown on drawing and as directed.

All as per item No. 16.00 here-in-before but replacement of stiffener with Supply and Fixing new stiffener made out of Ist class hard wood (teak wood) complete all as shown on drawings and as directed.

All as per item No. 16.00 here-in-before but replacement of rubber ring with Supply and Fixing new hard rubber ring of superior qualaity under the leg with steel screws of size 20mm long complete as shown on drawing and directed.

REPAIRS TO CHAIR WOODEN BOTTOM (FD - 56) Removing, taking out carefully old existing unserviceable plywood of seat for chair woooden bottom without arms and replacement of the same with Supply and Fixing new plywood both side commercial face BWR grade confirming to IS-373, 8mm thick for seat with holes made in to shape fixed with 24 Nos steel screws of suitable size in position all as shown on drawing, specified and directed.

All as per item No. 25.00 here-in-before but replacement of back leg with Supply and Fixing new back leg made out of Ist class hard wood (teak wood) complete all as shown on drawing.

All as per item No. 25.00 here-in-before but replacement of front leg with Supply and Fixing new front leg made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item No. 25.00 here-in-before but replacement of side rail with Supply and Fixing new side rail made out of Ist class hard wood (teak wood) complete all as shown on drawings, specified and directed.

All as per item No. 25.00 here-in-before but replacement of front/back rail with Supply and Fixing new front/back rail madeout of Ist class hard wood (teak wood) complete all as shown on drawings, specified and directed.

All as per item No. 25.00 here-in-before but replacement of wooden back strip with Supply and Fixing new wooden back strip make out of Ist class hard wood (teak wood) complete all as shown on drawings, specified and directed.

All as per item No. 25.00 here-in-before but replacement of stiffener with Supply and Fixing new stiffener made out of Ist class hard wood (teak wood) complete all as shown on drawing, specified and directed.

All as per item No. 25.00 here-in-before but replacement of rubber shoe including screws with supply and fixing new hard rubber shoes of superior quality fixed with steel screws of suitable size to the bottom of leg complete as shown on drwings and directed.

Supply and Fixing new bracket with 04 Nos steel screws suitable size made out of Ist class hard wood (teak wood) of size 75mm x 75mm x 25mm fixed with 04 Nos steel screws complete all as shown on drawings and directed.

REPAIR TO TABLE WOODEN 900MM X 600MM WITH DRAWER/WITHOUT DRAWER (FD - 283/284) Removing/taking out carefully of old existing unserviceable/broken/damaged table top of table 900mm x 600mm of any description in any position and replacement of the same with Supply and Fixing new table top of 18mm thick pre-laminated particle board BWR exterior grade with and including 6 mm thick teak wood beading around, the top, made to shape fixed in position all as shown on drawing, specified, incluing polishing of new/ existing portion as directed.

All as per item No. 34.00 here-in-before but replacement of leg with Supply and Fixing new leg made out of Ist class hard wood (teak wood) complete all as shown on drawing specified and directed.

All as per item No. 34.00 here-in-before but replacement of long rail of table frame with Supply and Fixing new long rail make out of Ist class wood (teak wood) complete all as shown on drawing specified and directed.

All as per item No. 34 here-in-before but replacement, short rail of table frame with Supply and Fixing new table frame short rail made out of Ist class hard wood (teak wood) complete all as shown on drawings specified and directed.

All as per item No. 34.00 here-in-before but replacement of drawer including brass knob of suitable size and dia with Supply and Fixing new drawer made out of Ist class hard wood (teak wood) with brass knob chromium plated 40mm dia as approved by GE complete all as shown on drawing specified and directed.

All as per item No. 34.00 here-in-before but replacement of bottom centre stiffener made out of Ist class hard wood (teak wood) complete all as shown on drawings specified and directed.

All as per item No. 34.00 here-in-before but replacement of bottom side stiffener with Supply and Fixing new bottom side stiffener made out of Ist class hard wood (teak wood) complete all as shown on drawings and specified and directed.

All as per item No. 34.00 here-in-before but replacement of rubber ring with screw steel with Supply and Fixing new hard rubber ring of superior quality fixed with screws steel of suitable size of the bottom of leg complete all as shown on drawing and directed.

Supply and Fixing new bracket with 4 Nos steel screws suitable size of Ist class hard wood (teak wood) of size 100mm x 100mm x 3mm complete all as directed.

REPAIR TO TABLE DINING WOODEN 900MM X 900MM X 760MM FOR OR (FD - 29) Removing/taking out carefully of old existing broken/damaged table top of table 900mm x 900mm x 760mm of any description in any position and replacement of the same with Supply and Fixing new table top of 18mm thick pre-laminated particle board BWR exterior grade with and including 6 mm thick teak wood beading around, the top, made to shape fixed in position all as shown on drawing, polishing of new existing portion specified and directed.

All as per item No. 43.00 here-in-before but replacement of leg with Supply and Fixing new leg made out of Ist class hard wood (teak wood) complete all as shown on drawing, specified and directed.

All as per item No. 43.00 here-in-before but replacement of long rail of table frame with Supply and Fixing new long rail make out of Ist class wood (teak wood) complete all as shown on drawing specified and directed.

All as per item No. 43.00 here-in-before but replacement, short rail of table frame with Supply and Fixing new table frame short rail made out of Ist class hard wood (teak wood) complete all as shown on drawings specified and directed.

All as per item No. 43.00 here-in-before but replacement of rubber ring with screw steel with Supply and Fixing new hard rubber ring of superior quality fixed with screws steel of suitable size of the bottom of leg complete all as shown on drawing and directed.

Supply and Fixing new bracket with 4 Nos steel screws suitable size of Ist class hard wood (teak wood) of size 100mm x 100mm x 3mm complete all as directed.

REPAIR TO BED PLYTOP (HARD BED) (FD - 246 Removing, taking out carefully of old existing unserviceable plywood of any description in any position and replacement of the same with Supply and Fixing new plywood 12mm thcik commercial on both sides, grade BWR grade of size 1950mm x 900mm fixed with 72 Nos steel screws made to shape, fixed in position complete all as shown on drawing, polishing of new existing portion specified and directed.

All as per item No. 49.00 here-in-before but replacement of plywood on both side of head rest frame with Supply and Fixing new 3.5mm thick plywood one side teak veneered and other side commercial grade I (with BWP resin) with and including teak wood beading plain for head rest all round and half cut round beading from side and other side complete as per drawings beading made to shape, fixed in position complete all as shown on drawing specified and directed.

All as per item No. 49.00 here-in-before but replacement of leg of head rest with Supply and Fixing new Ist class hard wood (teak wood) leg made to shape fixed in position, complete all as shown in drawing specified and directed.

All as per item No. 49.00 here-in-before but replacement of plywood 3.5mm thick one side veneered and other side commercial grade I (with BWP resin) with and including plain beading and half cut round beading of foot rest with Supply and Fixing new plywood of foot rest fixing in position complete all as shown on drawing, specified and directed.

All as per item No. 49.00 here-in-before but replacement of leg of foot rest with Supply and Fixing new Ist class hard wood (teak wood) leg of foot rest made to shape fixed in position complete all as shown on drawing specified and directed.

All as per item No. 49.00 here-in-before but replacement of long rail with Supply and Fixing new Ist class hard wood (teak wood) long rail made to shape fixed in position complete all as shown on drawing specified and directed.

All as per item No. 49.00 here-in-before but replacement of short rail with Supply and Fixing new Ist class hard wood (teak wood) short rail made to shape fixed in position complete all as shown on drawing, specified and directed.

All as per item No. 49.00 here-in-before but replacement of stiffener with Supply and Fixing new Ist class hard wood (teak wood) stiffener made to shape fixed in position complete all as shown on drawing, specified and directed.

REPAIR TO TABLE DRESSING GENTS (FD - 230, F - 379) Dismentalling/taking out carefully broken top of exisiting table dressisng gents of any description in any position and replacement of the same with Supply and Fixing new top of table using 12mm thick prelaminated particle board one side laminated and other white balancing, exterior grade BWP with inclusing 6mm thick teak wood beading all round made to shape fixed in position all as shown on drawing specified ,polishing of new existing portion directed.

All as per item No. 57.00 here-in-before but side with Supply and Fixing new side of 12mm thick particle board one side teak veneered and other side commercial, exterior grade, BWP with and including 6 mm thick teak wood beading all round, made to shape, fixed in position complete.

All as per item No. 57.00 here-in-before but bottom with Supply and Fixing new 12mm thick veneered particle board commercial BWP grade.

All as per item No. 57.00 here-in-before but mirror with Supply and Fixing new mirror having size 380mm x 760mm x 5mm thick.

All as per item No. 57.00 here-in-before but back frame with Supply and Fixing new back frame made out of 45 mm x 40mm teak wood member and 6 mm thick commercial ply grade BWP grade.

All as per item No. 57.00 here-in-before but back ply Supply and Fixing new 900 mm x 380mm x 12mm thick ply one side teak veneered and other side commercial.

All as per item No. 57.00 here-in-before but knob with Supply and Fixing new chromium plated knob 25 mm dia, 24 mm length of best quality as directed.

All as per item No. 57.00 here-in-before but drawer with Supply and Fixing new drawer.

REPAIR TO TABLE DINNING 6 AND 8 PERSONS (F - 273) Dismantling taking out carefully and replacement of old existing broken top of table dining 08 persons of any description in any position and replacement of the same with Supply and Fixing new top of table of 18 mm thick pre-laminated particle board, one side laminated and other side white balancing, exterior grade BWR with and including 6mm thick tak wood beading all round made to shape, fixed in position all as shown on drawing, polishing of new existing portion specified and directed.

All as per item No. 65.00 here-in-before but top of table dining 06 persons

All as per item No. 65.00 here-in-before but leg with Supply and Fixing new teak wood leg.

All as per item No. 65.00 here-in-before but long rail with Supply and Fixing new teak wood long rail.

All as per item No. 65.00 here-in-before but short rail with Supply and Fixing new teak wood short rails.

All as per item No. 65.00 here-in-before but stiffener with Supply and Fixing new teak wood stiffener.

Provision of rectangular bracket with Supply and Fixing new teak wood bracket of size 100 mm x 100 mm x 30mm thick made to shape fixed in position, all as shown on drawing specified and directed.

REPAIRS TO TABLE CENTRE (FD - 274) Dismantling/ taking out carefully and replacement of old existing broken top of teapoy FD of any description in any position with supply and fixing new top of teapoy FD 18mm thick pre-laminated particle board, one side laminated and other side white balancing, exterior grade, BWR with and including 6 mm thick teak wood beading all round made to shape, fixed in position, all as shown on drawing, polishing of new existing portion specified and directed.

All as per item No. 72.00 here-in-before but leg with supply and fixing new teak wood leg.

All as per item No. 72.00 here-in-before but long rail with Supply and Fixing new teak wood long rail.

All as per item No. 72.00 here-in-before but short rails with Supply and Fixing new teak wood short rails.

All as per item No. 72.00 here-in-before but stiffener complete (long and short).

REPAIRS TO TEAPOY FD (FD - 278) Dismantling/ taking out carefully and replacement of old existing broken top of teapoy FD of any description in any position with supply and fixing new top of table of 18mm thick pre-laminated particle board, one side laminated and other side white balancing, exterior grade, BWR with and including 6 mm thick teak wood beading all round made to shape, fixed in position, all as shown on drawing, polishing of new existing portion specified and directed.

All as per item No. 77.00 here-in-before but leg with supply and fixing new teak wood leg.

All as per item No. 77.00 here-in-before but long rail with Supply and Fixing new teak wood long rail.

All as per item No. 77.00 here-in-before but short rails with Supply and Fixing new teak wood short rails.

All as per item No. 77.00 here-in-before but stiffener.

REPAIRS TO PEG TABLE (FD - 277) Dismantling/ taking out carefully and replacement of old existing broken top of Peg Table of any description in any position with supply and fixing new top of table of 18mm thick pre-laminated particle board, one side laminated and other side white balancing, exterior grade, BWR with and including 6 mm thick teak wood beading all round made to shape, fixed in position, all as shown on drawing, polishing of new existing portion specified and directed.

All as per item No. 82.00 here-in-before but leg with supply and fixing new teak wood leg.

All as per item No. 82.00 here-in-before but long rail with Supply and Fixing new teak wood long rail.

All as per item No. 82.00 here-in-before but short rails with Supply and Fixing new teak wood short rails.

All as per item No. 82.00 here-in-before but stiffener.

REPAIRS TO TABLE WRITING (FD - 275) Dismantling / taking out carefully and replacement of old existing broken top of table writing of any description in any position with Supply and Fixing new table top of 18mm thick pre laminated particle board. BWR exterior gradewith and including 6mm thick teak wood heading fixed in position, all as shown on drawing, polishing of new existing portion specified and directed.

All as per item No. 87.00 here-in-before but side including box complete of table writing with Supply and Fixing new 18mm thick particle board, one side teak face BWR grade and other side white.

All as per item No. 87.00 here-in-before but to long rails of table writing with Supply and Fixing new top long rail made out of Ist class hard wood (teak wood).

All as per item No. 87.00 here-in-before but top short rails of table writing with Supply and Fixing new top short rail made out of Ist class hard wood (teak wood).

All as per item No. 87.00 here-in-before but drawer with knob brass chromium plated 40mm dia with Supply and Fixing complete new drawer made out of Ist class hard wood (teak wood) with knob.

All as per item No. 87.00 here-in-before but bottom centre stiffener with Supply and Fixing new bottom center stiffener made out of Ist class hard wood (teak wood).

All as per item No. 87.00 here-in-before but leg with Supply and Fixing New leg made out of Ist class hard wood (teak wood)

All as per item No. 87.00 here-in-before but bottom side stiffener with Supply and Fixing new bottom side stiffener made out of Ist class hard wood (teak wood).

CHAIR WRITING, CHAIR CB OFFICE WOODEN, CHAIR DINNING, STOOL DRESSING,CHAIR EASY & BIN SOIL LINEN (FD - 279, FD - 280, FD - 282 & FD - 229) Taking old worn out cane and M&L for re-canning of chairs wooden/steel (any type), Stool dressing, Bin Soil linen in Godrej pattern with 2.0mm wide, 0.4mm thick and beading with 4mm wide half round white plastic cane all as specified and shown on drawing.

SOFA SET 05 SEATER (FD - 281) Removing of old unserviceable cushion and tapestry cloth and providing new 100 mm thick cushion of approved Superior quality (Sleep Well) of 32 density covered with best quality tapestry cloth as approved by Engr-in-charge

SOFA SET 05 SEATER (FD - 281) Removing of old unserviceable tapestry cloth from cushion and providing new tapestry cloth duly stitched approved Superior quality as approved by Engr-in-charge.

M&L for polishing for the following wooden furniture including preparation/cleaning of old polished surfaces by scraping with fine abbressive cloth and applying two coats of french/spirit polish of the existing shades all over the wooden exposed surfaces direct in vision etc for Chair writing/CB Office/Chair dining/Chair Easy /Chair Draftman (FD - 250, FD - 261, FD - 262 & FD - 229)

All as per item No. 98.00 here-in-before but Peg Table / Table bed side/ Stool dressing (FD - 236, FD - 252 & FD - 248)

All as per item No. 98.00 here-in-before but Sofa set for 5 person (one piece of three seater and two pieces of single seater) (FD - 281)

All as per item No. 98.00 here-in-before but Table center / Teapoy / Table dressing gents and ladies (FD - 235, FD - 232, FD - 230 & FD - 251)

All as per item No. 98.00 here-in-before but Table dining 6 persons (FD - 239)

All as per item No. 98.00 here-in-before but Table dining 8 persons (FD - 239)

All as per item No. 98.00 here-in-before but Table office officer wooden

All as per item No. 98.00 here-in-before but Side Board (FD - 241)

All as per item No. 98.00 here-in-before but Book shelf open large wooden (FD - 1103)

All as per item No. 98.00 here-in-before but Bed Ply Top Wooden (FD - 246 & FD - 247)

STEEL FURNITURE

REPAIRS TO ALMIRAH LARGE/SMALL (FD-67/1031/1032/1033/1034) S&F of handle steel Chromium plated of size 100mm long with 25mm long steel pin to make 3 way locking system fully operational including removing of unserviceable handle steel from Almirah steel of any size or type complete all as per specified and directed.

S&F of three way locking device to making the system fully operational including removing of unserviceable locking system of Almirah large steel complete all as per specified and directed.

All as per item No. 109.00 here in above but for Almirah Medium/Small steel.

S&F of Lock six livers, brass of best pattten, with duplicate keys and including removing unserviceable lock from Almirah steel of any size or type complete all as per specified and directed.

S&F of Clips for fixing of shelves, including removing unserviceable clips from Almirah steel of any size or type complete all as per specified and directed.

Repairs to door as specified including replacement of Hinges of almirah steel med / large all as per specified and directed.

M&L for preparation of old painted surfaces by rubbing down with emery paper without damaging the existing coat, clean throughly to remove all dust/oily sport etc and applying one coat of synthetic emanel paint olive green with spray gun all side for Almirah large steel all as specified and directed.

S&F shelves of MS sheet 1.00 mm thick of existing size and shape including applying a coat of red oxide primer and including removing of unserviceable shelves from Locker bedside steel.

REPAIR TO GI CHARPOYS (FD - 220) Removing the existing unserviceable nylon newar from GI charpoy and tighting of the frame of GI Charpoys and supply and fixing of 12mm thick ply wood commercial, BWR Grade ISI Marked of size 1980mm x 900mm and rounded edges on four corners with GI bolts and nuts 6mm dia 75mm long with washers (3mm thick duly drilled 10 holes per GI charpoy (03 each on both long rails and 2 Nos of each on both short rails) and fixing complete including S&F 02 Nos flat iron 40mm width x 5mm thick x 880mm length to be placed over long rails (Flat Iron to be placed between plywood and long rails and to be fixed with the same bolt and washers mentioned above) . The ends of flat iron should be gound smoothly and apply two coat of enamel paint black over a coat of metal primer for entire flat iron all as specified and directed.

Taking out old unserviceable long rail from charpoy GI and supply and dixing in position new 1950mm long rail made out of 32 mm GI pipe including necessary curring, threading complete all as specified and shown on drawing.

Cutting and threading for short rail of size 830mm from long rail retrieved from srl item No. 10 above and fixing in position after recoving old unserviceable short rail of charpoy GI including necessary threading, cutting etc complete all as specified and directed.

Cutting and threading 390mm long leg of GI charpoy out of short rail retrieved from srl item No. 11 above and welded 3mm MS plate on bottom side and fixing in position after removing of broken leg complete all as specified and as shown on drg.

Taking out old unserviceable elbow and Supply and Fixing new 32mm dia three way elbow ISI marked.

Taking out old unserviceable check nut and Supply and Fixing new 32mm dia check nut ISI marked.

Repairs to Table Steel Office Officers, Table office clerk, Table Drafts men FD-1004, FD-1003 and FD-303 (a) Taking out defaced surface and welding of broken portion and matching the surface by applying synthetic enamel paint of existing of colour and shape including preparation of surfaces as directed by Engineer-in-Charge.

(b) Taking out unserviceable top from table and Supply and Fixing new top made of 18mm thick particle board fixed with nuts and bolts duly fixed with 1mm thick laminated sheet complete all as shown on drawing, specified and directed by Engineer-in-Charge.

Chair steel tubular with arms FD-75 M&L for removing wooden hand rest, seat and back from chair steel tubular with arms, derusting of steel surfaces with fine sand paper, leveling the surface by filling putty when ever required and applying one coat of synthetic enamel paint OG colour by hand brush or as directed including polishing to wooden surfaces by applying french polish of existing shades and refixing the hand rest, seat & back by tightening the screws etc complete

Chair CB Steel with Arms and without Arms FD- 75 (a) Removing / taking out carefully of old existing unserviceable / broken seat of chair CB Steel with Arms of any description, in any position & replacement of the same with new seat duly canning, cane shall be 2mm wide and 0.4mm thick gola type, wooden surfaces of seat shall be painted with high gloss black paint. Wood for seat shall be made first class hard wood (teak wood) complete all as shown on drawing and directed, painting of new existing portion, by Engineer - in - Charge.

(b) Removing / taking out carefully of old existing unserviceable / broken back of chair CB Steel with Arms of any description, in any position & replacement of the same with new back duly canning, cane shall be 2mm wide and 0.4mm thick gola type, wooden surfaces of seat shall be painted with high gloss black paint. Wood for seat shall be made first class hard wood (teak wood) complete all as shown on drawing and directed by Engineer - in - Charge.

(c) Removing / taking out carefully of old existing unserviceable / broken seat of chair CB Steel with out Arms of any description, in any position & replacement of the same with new seat duly canning, cane shall be 2mm wide and 0.4mm thick gola type, wooden surfaces of seat shall be painted with high gloss black paint. Wood for seat shall be made first class hard wood (teak wood) complete all as shown on drawing and directed by Engineer - in - Charge.

(d) Removing / taking out carefully of old existing unserviceable / broken back of chair CB Steel with out Arms of any description, in any position & replacement of the same with new back duly canning, cane shall be 2mm wide and 0.4mm thick gola type, wooden surfaces of seat shall be painted with high gloss black paint. Wood for seat shall be made first class hard wood (teak wood) complete all as shown on drawing and directed by Engineer - in - Charge.

(e) Replacement of old broken Arm rest of chair CB steel with arm with Supply and Fixing new arm rest made out of Ist class hard wood (teak wood) wooden surfaces of Arm Rest shall be painted with high gloss black paint complete all as shown on drawing and directed by Engineer-in-Charge

Rack steel adjustable type FD-1039 but Rack steel 3 Tier/Rack steel of 6 tier (adjustable type). M&L for painting to Almirah large with shelves and Almirah large glazed w/shelves by de-rusting of surfaces with fine sand paper and leveling to chiped out old painted surfaces with steel putty as per standard workmanship and applying one coat of synthetic enamel paint OG colour on the dry steel surfaces etc complete.

REPAIR TO CHAIR ARANDAH (FD - 220) Taking out old worn out cane from chair varandah and welding the broken joints and applying two coats of paint synthetic enamel white by hand brush over a well prepared surface and recaning the same with 4 mm wide 0.6mm thick half round white plastic cane complete as specified and directed.

Note for all items:- The contractor has to arrange execution of work at site or as directed by Engr-in Charge under AOR of BSO Bhopal which includes entire area of Bairagarh and SI Line military area. Contractor has to remove furniture items from stores/ Accns/ Office premises and after repair/polishing, shall be kept back in stores/ Accns/ Office premises as directed. Necessary transportation of material and labour at site shall be deemed to be included in the rate quoted by the contractor.

Deduct schedule of credit (calculation will be done off line) Rs. 71084.00

TANUJ CONST. CO.