CERTAIN SPECIAL REPAIR AND LBW WORKS OF E/M NATURE AT MIRAN SAHIB UNDER GE JAMMU

Amount

Taking out existing unserviceable / old steel / mild steel angle iron frame of any size from the wall by dismantling bricks and making the surface good complete with brick works, plaster, white wash, patch work matching with existing colour complete all as specified and as directed.

Taking out serviceable electric meter from the panel board after disconnecting all incoming / outgoing connection carefully and refixing the same in position complete all as specified and as directed.

Material and labour for replacement of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Material and labour for replacement of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Material and labour for replacement of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Material and labour distribution board double door sheet steel phosphatised powder painted for MCB / distribution board with copper bus bar and neutral link earthing stud TPN 4 way 415 volts doubled door including taking down old one complete all as specified and as directed.

Supply and fixing in replacement of vertical distribution board (TP&N) 4 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and outgoing MCB's and should be IP-43 protected with copper bus bars, neutral links, earthing bar complete all as specified and as directed including taking down old unserviceable distribution board / MCB any type. Notes: - (i) MCB's shall be measured and paid separately. (ii) TPN distribution board and MCCB should be of same make.

Supply and fixing in replacement of MCCB 4 pole, 415 Volt fixed thermal and fixed magnetic setting of capacity 125 Amps 16 KA complete all as specified and as directed.

Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 Amp, in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing SPN 32 Amp rating 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing SPN 40 to 63 Amp rating 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing 415V 10 KA 'B' curve TPN 100 Amp miniature circuit breaker (MCB) of following poles and current carrying capacity in the distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 6.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqmm for phase and neutral and one run of 4.00 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Supply and fixing in replacement of PVC enclosure DP complete with MCB SPN 32 Amp 10 KA 230 volt complete all as specified and as directed including taking down old one.

Supply and fixing in replacement of sheet steel cable and box (bus-bar) 4 way 440 volt, 50 Hz single door with 200 Amp rated bus bar mounted on insulator including taking down old one complete all as specified and as directed.

Excavating in trenches not exceeding 1.5 metres wide and not exceeding 1.5 metre in depth for foundation of poles, taking out / laying of cables, poles etc and getting out in soft / loose soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft / loose soil complete all as specified and as directed.

Removing excavated materials not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil complete all as specified and as directed.

Supply and laying including replacement well burnt bricks, sub class 'B' bricks, laid breadth wise in trenches for protection of underground cable complete all as specified and as directed.

Material and labour for sand cushioning to underground cables 8 cm thick before laying the cable and 10cm thick after laying, stretching and testing the cable complete all as specified and as directed.

Supply and fixing including replacement galvanised iron tube light grade 40 mm bore laid in trenches / road / drain / wall alongwith all fittings complete with mild steel clamp and nut bolts and washers etc, including taking down old galvanised iron tubing alongwith all fixing accessories complete all as specified and as directed.

Supply and laying in trenches, fixing or passing through pipe, fixed to wall / pole, connecting and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm, 3.5 core complete all as specified and as directed by Engineer-in-Charge. Note: - Wherever cable fixing / connection, suitable thimble should be used as per site situation.

Supply and fixing PVC flat serviceable cable 10 Sqmm 2 core multistranded conductor 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular including taking down old one complete all as specified and as directed.

Supply and fixing polycarbonate meter boxes and complete enclosure of size 4 feet X 6 feet for TPN boxes, distribution board boxes and meter enclosure, vermin proof, rust proof having locking arrangement complete all as specified and as directed.

Supply and fixing PVC flat serviceable cable 16 Sqmm 2 core stranded multiconductor 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular including taking down old one complete all as specified and as directed.

Material and labour in replacement for earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 metre deep below normal ground level with top edge of the earth plate not less than 1.5 metre below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 pre-cast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and as directed.

Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed. Note: - Rates are deemed to be included the cost for fixing of 4 No's rawl plug of suitable size (4" to 6") nuts and bolts, grouting work in RCC / Brick wall.

Material and labour for point wiring independent taking direct from existing main distribution board installed at entrance complete using with 2.5 Sqmm (nominal area), PVC insulated, multistranded, unsheathed, copper conductor cables drawn through and including concealed in PVC conduits with all accessories complete fixed to walls / ceiling etc. with and including 2.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including 1.6 mm thick mild steel sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light / fan / bell point controlled by one, one way switches complete all as specified and as directed.

Supply and fixing switch socket outlet combined 2 in 1, 3 pin 5 amp and 15 amp flush type, 240 volts complete all as specified and as directed.

Material and labour for cutting to existing pipe 15 / 20mm dia in position and insertion of 'T', additional alteration in position complete with GI fittings as required at site for connecting new GI pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing galvanised iron pipe medium grade of size 15mm complete with all fittings such as bend, tee, reducer, elbow and union of required size complete all as specified and as directed. Note: - Rates are deemed to be included for fixing of mild steel clamps of suitable size to hold the galvanised iron pipe.

Supply and fixing gun metal or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete of size 15 mm dia complete all as specified and as directed.

Material and labour for PVC connection pipe heavy duty ISI marked of 15mm size with PTMT nuts of length 450mm from galvanised iron pipe to geyser unning Metre Note: - PVC connection pipe should be compatible to hot and cold water.

Supply and fixing bib tap fancy type cast copper alloy with crutch or butterfly handle, screwed down for iron pipe 15mm dia complete all as specified and as directed.

Material and labour for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 4.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through in new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Supply and laying well burnt bricks, sub class 'B' bricks, laid breadth wise in trenches for protection of underground cable complete all as specified and as directed.

Supply and fixing galvanised iron tube light grade 40 mm bore laid in trenches / road / drain / wall alongwith all fittings complete with mild steel clamp and nut bolts and washers etc, including taking down old galvanised iron tubing alongwith all fixing accessories complete all as specified and as directed.

Supply and laying in trenches, fixing or passing through pipe, fixed to wall / pole, connecting and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm, 3.5 core, complete all as specified and as directed by Engineer-in-Charge. Note: - Wherever cable fixing / connection, suitable thimble should be used as per site situation.

Supply and fixing distribution board sheet metal enclosures double door, factory made, made out of CRCA mild steel sheet 1.2 mm thick with metallic painting, FP-42 protection surface mounting 240 volts, 200 Amp rated enamelled neutral bus bar 8 way dust and vermin proof suitable for incorporation of Isolator / MCB's duly concealed in wall and making good the disturbed surface and colour matching complete all as specified and as directed.

Supply and fixing MCB single pole neutral 240 volts, 40 Amps, "B" series 10 KA complete all as specified and as directed.

Supply and fixing MCB single pole 240 volts, 06 to 40 Amps, "B" series 10 KA complete all as specified and as directed.

Supply and fixing distribution board double door (suitable for incomer MCCB's and outgoing MCB) TP&N vertical load line 6 way complete with 200 Amps bus bar, 415 Volt sheet metal enclosure suitable for 'G' frame MCCB complete all as specified and as directed.

Supply and fixing isolator 4 pole, TPN 415 volts, 100 Amps rating with rupturing capacity 16 KA complete all as specified and as directed.

Dismantling and taking down street light / security light fitting from pole / wall / trusses LED / HPSV / MH / T 5 / CFL lamp of any watt or any size by disconnecting all cable connections nuts and bolts, split opening the same into the parts for fault finding and replacement of burnt / worn out / unserviceable parts such as choke, ignitor, condenser, holder any type, flexible wire, lamp etc. as required and refixing repaired fitting on the same place, including testing upto the satisfaction of the Engineer-in-Charge complete all as specified and as directed.

Taking out old / unserviceable underground LT cables and connections including pipes, bricks or precast concrete cable cover etc of any size from trenches / walls / poles of any cross sectional area and removing from site complete all as specified and as directed.

Supply and fixing including replacement LED street light fitting 70 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete and all as specified and directed. Makes: - Bajaj CAT Part No ENXT P 84L WH CR PC SD or equivalent in BENLO, Philips and Havells.

Supply and fixing thermoplastic polystyrene / polycarbonate enclosure shock proof, IP-65 (weather proof) rust proof, dust proof, water proof, internally embedded gasket with provision for all side cable entry throught gland (IP-65) and / or gromments (IP-55) pole mounting junction box of size 225mm x 295mm x 122mm, front openable door suitable to house and including 04 No's aluminium bus bar of 400 Amps capacity mounted on suitable insulators, one No MCB SP 6A mounted on din rail, internally wired with suitable size of copper conductor cable, provision of bottom / side cable in and out with cable glands including mounting on steel tubular poles with two No's FI clamps 25mm x 3mm with nuts, bolts and washers complete including making connection with 2.5 Sqmm copper conductor PVC insulated 3 core cable from junction box to security lights fittings duly laid inside the steel tubular pole complete all as specified and as directed.

Supply and fixing in repair street light mounting bracket made out of galvanised iron pipe 40 mm dia medium grade not less than with 1.2 m long in any shape with 2 no's of pole fitting clamps made out of mild steel flat of size 40 x 6 mm and nuts and bolts and painting with aluminium paint complete all as specified and as directed by Engneer-in-Charge.

Material and labour for preparation of old painted steel pole and cross arms etc surfaces of any description and applying one coat of aluminium paint and marking pole number etc complete all as specified and as directed by Engineer-in-Charge.

Supply and laying in trenches, duct, sleeving through pipe in duct / on pole jointing and testing PVC insulated sheathed, heavy duty LT cable 1100 Volts grade, with armoured heavy duty LT underground cable 1100 volts grade with aluminium stranded conductor of cross sectional area 25 Sqmm x 3.5 core including suitable thimble / cable glands etc complete all as specified and as directed.

Supply and laying in trenches, duct, sleeving through pipe in duct / on pole jointing and testing PVC insulated sheathed, heavy duty LT cable 1100 Volts grade, with armoured heavy duty LT underground cable 1100 volts grade with aluminium stranded conductor of cross sectional area 35 Sqmm x 3.5 core including suitable thimble / cable glands etc complete all as specified and as directed.

Material and labour in replacment of galvanised iron pipe light grade 32 mm bore for cable protection as a guard pipe complete all as specified and as directed.

Harsh Electricals (BID ID -3076654)

M/S JIWAN SINGH (BID ID -3095415)

DARVESH ENGINEERING WORKS (BID ID -3089599)

M/s Sahib Construction and engineers (BID ID -3089639)