Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹13.7 L+₹1.5 L (12.4%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
19 Nov 2022, 6:00 pmClosed
Garrison Engineer Abohar
Garrison Engineer Abohar Pin 152116
Repair/Maint and cleaning of water supply installation at Fazilka Mil Stn
2022_MES_558533_1
GE ABH-44/22-23
Open Tender
Civil Works
Item Rate
180 days
Fazilka Mil Stn
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Abohar
₹30,000
Yes
7 Jan 2023
18 Oct 2022
21 Nov 2022
18 Oct 2022
19 Nov 2022
4 Nov 2022
Amount
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundations etc or manholes, cesspits, pipes and cables etc. not exc 10 Sqm on plan and getting out in soft / loose soil all as specified and directed by Engineer - in - Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers of soft / loose soil not exceeding 25cm thick all as specified and directed by Engineer - in - Charge.
Dismantling/Taking out CI/DI water mains (including all fittings) with spigot and socket ends and rubber gasket joints 150mm bore complete all as specified and directed by Engineer - in – Charge.
Dismantling/Taking out CI/DI water mains (including all fittings) with spigot and socket ends and rubber gasket joints 200mm bore complete all as specified and directed by Engineer - in – Charge.
Dismantling/Taking out CI/DI water mains (including all fittings) with spigot and socket ends and rubber gasket joints 250mm bore complete all as specified and directed by Engineer - in – Charge.
M & L for cast iron Fittings for spigot and socket /flanged pipes such as bends (any type, radius and angle) Tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, ‘Y’ junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150mm bore pipes all as specified and as directed by Engineer-in-Charge.
M & L for cast iron Fittings for spigot and socket /flanged pipes such as bends (any type, radius and angle) Tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, ‘Y’ junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs for 200mm to 300mm bore pipes all as specified and as directed by Engineer-in-Charge.
M & L for DI fittings for DI Spigot and socketed/ flanged pipes like bends (any type, radius and angle) straight, taper, bend, increasing, decreasing double socket etc.) tee pieces single branch “Y” junction double branch, cross collars, caps and plugs etc. complete all as specified. Note for DI Fittings :-The weight of the fittings for the purpose of payment shall be actual weight of the fittings or as specified in IS code whichever is less.
Burning out lead joint in position, including removing old for 150mm bore of pipes complete all as specified and as directed by Engineer-in-Charge.
Burning out lead joint in position, including removing old lead for 200mm bore of pipes complete all as specified and as directed by Engineer-in-Charge.
Burning out lead joint in position, including removing old lead for 250mm bore of pipes complete all as specified and as directed by Engineer-in-Charge.
M & L for run lead joint suitable for 150mm bore spigot and socketed pipes and fittings complete all as specified and as directed by Engineer-in-Charge.
M & L for run lead joint suitable for 200mm bore spigot and socketed pipes and fittings complete all as specified and as directed by Engineer-in-Charge.
M & L for run lead joint suitable for 250mm bore spigot and socketed pipes and fittings complete all as specified and as directed by Engineer-in-Charge.
Dismantling joints of flanged pipes in position, including removing old rubber or fibre board gaskets, bolts, nuts. for 150 mm Bore of pipes.
Dismantling joints of flanged pipes in position, including removing old rubber or fibre board gaskets, bolts, nuts. for 200 mm Bore of pipes.
Dismantling joints of flanged pipes in position, including removing old rubber or fibre board gaskets, bolts, nuts. for 250 mm Bore of pipes.
M&L flanged joint with rubber or fibre board gasket including removing old rubber tighten Joint for 150 mm Bore of pipes.
M&L flanged joint with rubber or fibre board gasket including removing old rubber tighten Joint for 200 mm Bore of pipes.
M&L flanged joint with rubber or fibre board gasket including removing old rubber tighten Joint for 250 mm Bore of pipes.
M & L for tighten Joint with rubber or fibre board gasket including removing old rubber tighten Joint for 150 mm Bore of pipes.
M & L for tighten Joint with rubber or fibre board gasket including removing old rubber tighten Joint for 200 mm Bore of pipes.
M & L for tighten Joint with rubber or fibre board gasket including removing old rubber tighten Joint for 250 mm Bore of pipes.
M&L for taking out sluice valves, refacing, regrinding and refixing for 80mm bore complete all as specified and as directed by Engineer-in-Charge.
M&L for taking out sluice valves, refacing, regrinding and refixing for 100mm bore complete all as specified and as directed by Engineer-in-Charge.
M&L for taking out sluice valves, refacing, regrinding and refixing for 150mm bore complete all as specified and as directed by Engineer-in-Charge.
M&L for taking out sluice valves, refacing, regrinding and refixing for 200mm bore complete all as specified and as directed by Engineer-in-Charge.
M&L for taking out sluice valves, refacing, regrinding and refixing for 250mm bore complete all as specified and as directed by Engineer-in-Charge.
M& L for replacement of gland packing of sluice valve for 80mm bore complete all as specified and as directed by Engineer-in-Charge.
M& L for replacement of gland packing of sluice valve for 100mm bore complete all as specified and as directed by Engineer-in-Charge.
M& L for replacement of gland packing of sluice valve for 150mm bore complete all as specified and as directed by Engineer-in-Charge.
M& L for replacement of gland packing of sluice valve for 200mm bore complete all as specified and as directed by Engineer-in-Charge.
M& L for replacement of gland packing of sluice valve for 250mm bore complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing sluice valve flanged type Class PN 1.6 size 80mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.
Supply and fixing sluice valve flanged type Class PN 1.6 size 100mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.
Supply and fixing sluice valve flanged type Class PN 1.6 size 150mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.
Supply and fixing sluice valve flanged type Class PN 1.6 size 200mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.
Supply and fixing sluice valve flanged type Class PN 1.6 size 250mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.
S&F "D" Joint with nut and bolt suitable for 80mm bore DI/CI pipes and fittings complete all as specified and as directed by Engineer-in-Charge.
S&F "D" Joint with nut and bolt suitable for 100mm bore DI/CI pipes and fittings complete all as specified and as directed by Engineer-in-Charge.
S&F "D" Joint with nut and bolt suitable for 150mm bore DI/CI pipes and fittings complete all as specified and as directed by Engineer-in-Charge.
S&F "D" Joint with nut and bolt suitable for 200mm boreDI/CI pipes and fittings complete all as specified and as directed by Engineer-in-Charge.
S&F "D" Joint with nut and bolt suitable for 250mm bore DI/CI pipes and fittings complete all as specified and as directed by Engineer-in-Charge.
Dismantling/Taking out steel tubing 20mm bore and connections including fitting complete all as specified and directed by Engineer - in – Charge.
Dismantling/Taking out steel tubing 25 or 32mm bore and connections including fitting complete all as specified and directed by Engineer - in – Charge.
Dismantling/Taking out steel tubing 40 or 50mm bore and connections including fitting complete all as specified and directed by Engineer - in – Charge.
Dismantling/Taking out steel tubing 80mm bore and connections including fitting complete all as specified and directed by Engineer - in – Charge.
Dismantling/Taking out steel tubing 100mm bore and connections including fitting complete all as specified and directed by Engineer - in – Charge.
Dismantling/Taking out MS tubing 65/80/100 mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.
Refixing old MS tubing 65/ 80/100 mm bore and connections in new or old position (Walls, ceiling, floors, trench etc.)
S & F MS flange Pipe heavy grade of size 65 mm dia with all fittings laid in trenches all as specified and directed by Engineer - in - Charge .
S & F MS flange Pipe heavy grade of size 80 mm dia with all fittings laid in trenches all as specified and directed by Engineer - in - Charge .
S & F MS flange Pipe heavy grade of size 100 mm dia with all fittings laid in trenches all as specified and directed by Engineer - in - Charge .
S & F MS flange of size 65 mm dia thickness not less than 15 mm including welding with pipe of appropriate size all as specified and directed by Engineer - in - Charge .
S & F MS flange of size 80 mm dia thickness not less than 15 mm including welding with pipe of appropriate size all as specified and directed by Engineer - in - Charge .
S & F MS flange of size 100 mm dia thickness not less than 15 mm including welding with pipe of appropriate size all as specified and directed by Engineer - in - Charge .
S & F 20mm bore medium grade steel tubes galvanised with all fittings laid in trenches all as specified and directed by Engineer - in – Charge .
S & F 25mm bore medium grade steel tubes galvanised with all fittings laid in trenches all as specified and directed by Engineer - in – Charge .
S & F 40mm bore medium grade steel tubes galvanised with all fittings laid in trenches all as specified and directed by Engineer - in – Charge .
S & F 50mm bore medium grade steel tubes galvanized with all fittings laid in trenches all as specified and directed by Engineer - in - Charge .
S & F 80mm bore medium grade steel tubes galvanized with all fittings laid in trenches all as specified and directed by Engineer - in - Charge .
S & F 100mm bore medium grade steel tubes galvanized with all fittings laid in trenches all as specified and directed by Engineer - in - Charge .
Cutting existing 20mm bore tubing for alteration or addition complete all as specified and as directed by Engineer-in-Charge.
Cutting existing 25 or 32mm bore tubing for alteration or addition complete all as specified and as directed by Engineer-in-Charge.
Cutting existing 40 or 50mm bore tubing for alteration or addition complete all as specified and as directed by Engineer-in-Charge.
Screwing existing 20mm bore tubing for alteration or addition (or lengthening screw on pipe to form connector) complete all as specified and as directed by Engineer-in-Charge.
Screwing existing 25 or 32mm bore tubing for alteration or addition (or lengthening screw on pipe to form connector) complete all as specified and as directed by Engineer-in-Charge.
Screwing existing 40 or 50mm bore tubing for alteration or addition (or lengthening screw on pipe to form connector) complete all as specified and as directed by Engineer-in-Charge.
S & F gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 50mm bore complete all as specified and directed by Engineer – in – Charge.
S & F gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 40mm bore complete all as specified and directed by Engineer – in – Charge.
S & F gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 25mm bore complete all as specified and directed by Engineer – in – Charge.
S & F globe or gate valve with iron wheel head, screwed both ends for iron pipes 20mm bore complete all as specified and directed by Engineer – in – Charge.
Supply and fixing reflux (Non -return) valve flanged type rating PN 1.6 size 80mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.
Supply and fixing reflux (Non -return) valve flanged type rating PN 1.6 size 100mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.
Supply and fixing reflux (Non -return) valve flanged type rating PN 1.6 size 150mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.
Supply and fixing foot valve flanged type of size 80mm bore with necessary gasket, nuts, bolts and washers etc. including testing for leakage complete all as specified and directed by Engineer – in – Charge.
Supply and foot valve flanged type of size 100mm bore with necessary gasket, nuts, bolts and washers etc. including testing for leakage complete all as specified and directed by Engineer – in – Charge.
M &L to water level indicator manualy operated gauge including replacement of 6"dia gauge marked 0-50/100 for rate of flow and connecting with wire and float includig painting with two coats of symathetic enamal paint over a coat of redoxide primer including preparation of old steel surface complete all as specified
S & F in replacement of rubber type flexible couplings suitable for 7.5 to 15 HP motor pump set etc complete all as specified and directed by Engineer-in-charge.
all as per item No-79 ( here- in-before) but Suitable for 20 to 25 HP
all as per item No-79 ( here- in-before) but Suitable for 40 HP
M&L cement concrete 1:3:6 type B-1 using 20mm graded stone aggregates on road cutting including necessary form work complete all as specified & directed.
M & L for boring hole across the Road/plinth/hard standing by trench less technology method suitable for 80/100mm bore pipe for 0.4 mpa working pressure for cable passing without damaging Road / Plinth /Floor complete all as specified and directed.
M&L for disconnecting/dismantling of Unsv 3 phase 415 Volt 50 Hz AC Electric motor 5 HP/ 7.5 HP, transportation to Civil workshop and strip opening of worn out/ defective brunt stator winding, services cleaning of stator slots, bearing bushes etc rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, reassembling, installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. Make of winding wire shall be ATLAS/Devi dayal / BPL (Note - defect libility for motor and pump shall be one year from date of Repair
M&L disconnecting/dismantling and strip opening of worn out/defective Centrifugal pump of capacity 5 HP/ 7.5 H mono block type, taking out unserviceable bush, sleeve & sleeve joint etc repair to Impeller & shaft with proper brass brazing welding & lath work, assembling, testing, installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.
M&L disconnecting/dismantling and strip opening of worn out/defective Centrifugal electric motor of capacity 15 HP/ 20 HP mono block type, taking out brunt stator winding, services cleaning of stator slots, bearing bushes etc rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, assembling, installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. Make of winding wire shall be ATLAS/Devi dayal / BPL
M&L disconnecting/dismantling and strip opening of worn out/defective Centrifugal pump of capacity 15 HP/ 20 HPmono block type, taking out unserviceable bush, sleeve & sleeve joint etc repair to Impeller & shaft with proper brass brazing welding & lath work, assembling, testing, installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.
M&L disconnecting/dismantling and strip opening of worn out/defective submersible electric motor15 HP/ 20 HP , taking out brunt stator winding, services, cleaning of stator slots, bearing bushes etc rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. Make of winding wire shall be ATLAS/Devi dayal / BPL
M&L disconnecting/dismantling and strip opening of worn out/defective submersible pump 15 HP/ 20 HP, taking out unserviceable bush, sleeve & sleeve joint etc repair to Impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.
M&L disconnecting/dismantling and strip opening of worn out/defective Centrifugal electric motor of capacity 40 HP mono block type, taking out brunt stator winding, services cleaning of stator slots, bearing bushes etc rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, assembling, installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.
M&L disconnecting/dismantling and strip opening of worn out/defective Centrifugal pump of capacity 40 HP mono block type, taking out unserviceable bush, sleeve & sleeve joint etc repair to Impeller & shaft with proper brass brazing welding & lath work, assembling, testing, installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.
Supply and fixing the following parts for centrifugal pumping set of capacity 5/7.5 HP
(a) CI Impellar
(b) Brash Bush
(c) Stainless steel shaft
(d) Ball bearing as per existing size & No. SKF/NBC/Worma
Supply and fixing the following spare parts for cintrifugal pumping set 15/20 HP
(a) CI Impellar
(b) Brash Bush
(c) Stainless steel shaft
(d) Ball bearing as per existing size & No.
All as per ser Item No above here-in- before but submersible pumping set capacity 15/20 HP
(a) Gun metal Impeller
(b) Stainless steel shaft
(c) Thrust rod
(d) Distance sleave
(e) Motor Bush
(f) Sealing kit
(g) Thrust plate
(h) Pump coupling stainless with key
(j) Studs & Nuts
Supply and fixing the following spare parts of contrifugal pumping set of 40HP capacity
(a) CI Impellar
(b) Brash Bush
(c) Ball Bearing 6306 SKF/NBC/Worma
(d) Ball bearing No. 7306 SKF/NBC/Worma
S&F in replacement fully automatic star delta starter 3 phase 415 volts, 50 HZ in steel metal encloser type MV with SSP feature suitable for 40HP motor & relay range as recommended by manufacturer etc incl taking out unserviceable startr from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge Make- Bentex
All as per ser No above but 10/15 HP motor & relay range as recommended by manufacturer
DOL starter 5/7 .5HP motor & relay range as recommended by manufacturer
M/s Vikas Kumar Doda Contractor
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .