SPECIAL REPAIRS TO TOILETS WINDOWS DOOR PERIODICAL SERVICES ALLIED WORKS IN IT CENTRE BLDG NO P 512 AT CDM SECUNDERABAD UNDER GE NORTH SECUNDERABAD

Amount

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM1:6 with WPC @3% by weight of cement including finishing the surfaces complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately under relevant item of this schedule.

Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing), removal serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

S&F Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick rendering in CM 1:3 complete all as specified and as directed.

S&F GI tubing 15 mm bore medium grade with all fittings fixed in short length to walls and ceilings or laid in floors including taking down 15 mm dia GI tubing and connections complete all as specified and as directed.

S&F GI tubing 20 mm bore medium grade with all fittings fixed in short length to walls and ceilings or laid in floors including taking down 20 mm dia GI tubing and connections complete all as specified and as directed.

S&F GI tubing 25 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 25 mm dia GI tubing and connections complete all as specified and as directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortar 1:3 cutting not exceeding 10cm girth complete all as specified and as directed.

S&F in repairs Toilet paper holder of brass fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

M&L for cutting existing steel tubing for alterations or additions (Each cut measured) 15mm pipe complete all as specified and as directed.

M&L for cutting existing steel tubing for alterations or additions (Each cut measured) 20mm pipe complete all as specified and as directed.

M&L for cutting existing steel tubing for alterations or additions (Each cut measured) 25mm pipe complete all as specified and as directed.

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) 15mm pipe complete all as specified and as directed.

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) 20mm pipe complete all as specified and as directed.

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) 25mm pipe complete all as specified and as directed.

S&F in repairs15mm size pillar tap fancy type long shank chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make: JAQUAR Cat Part No. PRS-CHR-031 or equivalent as approved by GE.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges as fixed in repair etc., complete all as specified and as directed.

S&F in repair towel ring of CP fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F CP health faucet with 1.0mtr tube and hook complete all as specified and as directed. Make: Cat No: ALD-579 of JAQUAR or equivalent as approved.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM1:6 complete all as specified and as directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repairs PVC LDPE waste pipe 32mm dia 1m length complete all as specified and directed

S&F in repairs 15mm size two way bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed Make: JAQUAR Cat Part No. FLR-CHR-5053N or equivalent as approved by GE.

S&F in repairs soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall complete all as specified and as directed

S&F in repairs liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 105gms) complete all as specified and as directed

S&F in repairs Stop/angle valves fancy type 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Make: JAQUAR or equivalent as approved.

S&F aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Taking out existing water closet, pedestal pattern and replacing with new EWC (Pedestal Pattern) cascade type with flush tank, seat cover etc white including fixing bolts complete including making good to floor to match with adjoining surfaces complete all as specified and as directed. Make: JAQUAR Cat Part No. CNS-WHI-851S300SPP or equivalent as approved by GE.

S&F aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and as directed.

S&F aluminium handles 150mm size, cast type, anodised complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Butt hinges of 125 mm size, Medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F PVC (SWR) floor trap 75mm dia, plain with SS grating including jointing with solvent cement complete all as specified and as directed.

S&F Low density polyethylene (LDPE) pipes of pressure rating 6 Kg/Sqcm 50 mm bore single socketed in any length with rubber ring joints fixed to walls/floor as spout etc., complete all as specified and as directed.

S&F in repair bathroom mirror cabinet PVC of size 400x500mm fancy type complete all as specified and as directed. Make: Cat No-554 of Prayag or equivalent as approved by GE.

S&F in repair PVC wall hung fancy type looking mirror of size 2400x450 with quality glass mounted 6mm thick AC building board or commercial plywood or PVC board and fixed to wooden plug with chromium plated screws and cup washer complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coat of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty in two layers complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coat of plastic emulsion paint over a coat of alkali resistant primer over 3mm thick wall care putty in two layers complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coat of plastic emulsion paint over a coat of alkali resistant primer over 3mm thick wall care putty in two layers complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty in two layers complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment of old ceiling surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty in two layers complete all as specified and as directed.

M&L for complete removal of existing treatment of old ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surfaces & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall/concrete surfaces of any height complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plane exceeding 6m mean radius built in CM 1:4 complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, laid in cement mortar complete all as specified and as directed.

M & L for treating the marble surface with beeswax polish complete all as specified and as directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 sqm each etc including making good of hold fast holes with PCC Type C 1:3:6 complete all as specified and as directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n.exc 4 Sqm each etc making good of hold fast holes with PCC Type C 1:3:6 complete all as specified and as directed.

M & L for preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L for preparing new steel surfaces of any description nexc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparing old steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparing old wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, in opening as per specifications & drawings complete all as specified and as directed.

S&F Factory made PVC solid door shutter 28 to 30mm thick (styles) with 2,4,or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm Plain colour PVC sheet on back face with particle board Core supplying and fixing in frame at site as per specification complete all as specified and as directed.

M&L for MS hold fasts/band/strap of FI complete all as specified and as directed.

M&L for Vitrified ceramic tiles of dark shade double charged with 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for Vitrified ceramic tiles of dark shade with 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10mm thick rendering in CM 1:3 complete all as specified and as directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5Sqm in each pane including hacking out old broken glass (any thickness,size,quality or description) from metal frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F for 140 mm long floor doorstopper aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in repairs complete all as specified and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified and as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, cover etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and as directed.

Demolition of cement concrete of any description (unreinforced) in any position incl plastering etc., complete all as specified and as directed.

M&L for PCC 1:2:4 Type - B0 (using 12.50mm graded stone aggregate) as in padding concrete, covering etc., on roofs complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:4 using water proofing compound on concrete surfaces of roofs including parapets etc., and providing necessary slope complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately under relevant item of this schedule.

M&L for Priming surfaces and applying normal treatment (for moderate conditions) except felt complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wave fabric (Weight not less than 150gm/sqm) land on primed surface by forced application complete all as specified and as directed.

Supply only liquid water proofing compound for water proof plastering complete all as specified and as directed.

M&L for applying two coats of aluminium paint over a coat of primer of new surfaces of any description, over 10cm in width or girth not otherwise described complete all as specified and as directed.

M&L for Brushing neat cement slurry with 3.0kg of cement per Sqm complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F anodised aluminium snap grid frame work for false ceiling all as specified and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S&F 4mm thick non-asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

S&F anodised aluminium powder coated windows and ventilator shutters sliding type two/three track / side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) for openable and necessary fixtures incl rollers & locking arrangements etc., for sliding type complete all as specified and as directed.

S&F powder coated anodised aluminium frame for openable/sliding doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed.

S&F powder coated anodised aluminium door shutters,openable /sliding aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.for openable and necessary fixtures incl rollers & locking arrangements etc for sliding type complete all as specified and as directed.

M&L for providing and fixing stainless steel railing on stairs of 304 grade powder coated finish with including necessary cutting holes in wall & floor & top rail/runner shall be of 50mm dia-16G SS pipe, balusters shall be of 40mm dia -16G SS pipe at an avg distance of 900mm with toughened glass cladding and all other necessary fittings complete all as specified and as directed. Note: Toughened glass will be measured and paid separately.

S&F 4.8mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm complete all as specified and as directed.

S&F 5mm thick figured glass, pin head type and glazing with oil putty in square not exceeding 0.5Sqm complete all as specified and as directed.

M&L for 9mm thick prelaminated particle board interior grade prelaminated both sides with decorative choice laminations fixed with screws to timber/aluminium frame work complete all as specified and as directed.

S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm complete all as specified and as directed.

S&F in 200mm long SS decorative hinge for cabinets auto closed concealed type complete all as specified and as directed.

S&F 200mm long SS decorative handle fixed with screw complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / steel frames glazed with oil putty or fixed with beads complete all as specified and as directed.

S&F 4 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5Sqm in each pane complete all as specified and as directed.

M&L for makrana white Marble tiles 30cmx20cm x20mm thick machine cut, bedded in CM 1:6 20mm including screed,jointed and pointed with white cement slurry including cutting and polishing types complete all as specified and as directed.

Dismantling water tanks of capacity 1000lit and removing to store & Providing Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) 1000 lit capacity hoisted and fixed in position complete all as specified and as directed.

Dismantling water tanks of capacity 500lit and removing to store & providing rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) 500 lit capacity hoisted and fixed in position complete all as specified and as directed.

S&F 12mm thickness toughened plain/frosted glass with embedded logo as per user’s requirement as in wall partition, parapet cladding in SS rail & door shutter of approved brand and manufacture, including providing and fixing of top & bottom pivot & spring type fixing arrangements & necessary holes & making good & required hinges, SS 304 grade handles, door/floor spring etc., and including all necessary fittings complete all as specified and as directed.

S&F 12mm thickness toughened plain/frosted glass with embedded logo as per user’s requirement automatic motorised sliding door of toothed belt, microprocessor control system, door open position time 1-60 sec of approved brand and manufacture upto 2.4m height & 3m wide with required no of leafs with sensor arrangements including providing and fixing of top & bottom pivot & fixing arrangements & necessary holes & making good & required hinges, SS 304 grade handles, door/floor spring etc., and including all necessary fittings complete all as specified and as directed. Make: Enox, Ozone or equivalent as approved by GE.

S&F of emergency fire safety exit window frame should be mitered and field assembled with self tabs & shutter of double rebate profile of required size & thickness (16 gauge) minimum thick galvanised steel sheet complete all as specified and as directed. Make: Shakti Hormann or equivalent as approved by GE.

S & F powder coated aluminium deco grills with necessary frame work and necessary channel fixed to framework of windows/ventilators complete all as specified and as directed.

M&L for complete removal of existing treatment of old ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall/concrete surfaces of any height complete all as specified and as directed.

Demolition of concrete in ground floors and pavings not exceeding 15 cm thickness complete all as specified and as directed.

M&L for cement concrete type D2, 1:4:8 (40mm graded stone aggregate) 75 mm thickness as in sub base complete all as specified.

Machine cut kota stone slab flooring/tread of stairs 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F MS, plain, black sheet 1.25mm thick In wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams,incl bending or turning up mitred angles, etc., as required welded to frame complete all as specified and as directed.

Demoltion of stone slabs and tiles of any description or thickness in floors etc., laid in bedded and pointed in any mortar complete all as specified and as directed.

M&L for chequered cement concrete tiles 32cm x 20cm x 30 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and colour pigments and including 20 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size complete all as specified and as directed.

Demolition of cement concrete of any description (reinforced) in any position incl plastering etc., complete all as specified and as directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for landings , manhole cover slabs, duct etc., including necessary formwork and set in CM (1:6) complete all as specified and as directed.

MS TMT bars 8mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and binding with and including Mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc., on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc., and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out /DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M & L for point wiring on concealed conduit with 1.5 Sqmm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through existing conduit and conduit accessories of suitable dia medium grade and modular accessories including fixing/grouting sunken/ surface along with modular flush box of sutiable thickness covered with suitable modular cover plate including running up of 1.5 Sqmm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc., complete all as specified and as directed for one light/fan/Bell point controlled by one, one way switch 5A, SP NOTE: Rate of Modular Flush box and Cover plate are inclusive of rate quoted by the contractor

All as per serial item No 112 above but one 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per serial item No 112 above but one 3 Pin 5 Amps switch socket Independt board complete all as specified and as directed.

All as per serial item No 112 here-in-before but using 2.5 Sqmm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sqmm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

All as per serial item No. 115 above but one 2/3 pin 15 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

S & F Modular switch 1 way 10 A, 1 Module capacity 230 volts complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

S & F Modular switch 1 way 16 A, 1 Module capacity 230 volts complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

S&F Modular Bell Push 10A, 1 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

Supply and fix socket outlet modular type multipurpose 2/3 Pin, 10 amps, 230 volts combined 2 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

Supply and fix socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

S & F Modular ceiling fan regulator stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

S & F calling Bell, AC, 230 volts, single pole complete all as specified and as directed.

S & F in replacement of single pole and neutral enclosure with a two pin and earth plug and socket metal clad complete with one singlepole MCB 20 Amps (AC Box) complete all as specified and as directed. Make:Havells/Standard/IndoAsian

S & F in replacement of triple pole and neutral enclosure with a three pin and earth plug and socket metal clad complete with one Three pole MCB 32 Amps (AC Box) complete all as specified and as directed. Make: Havells/Standard/IndoAsian

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed.

S&F sheet metal enclosure vertical type MCCB DB TPN 4 way double door with 200 Amps rated bus bar 415 volts suitable for and including 63/100 Amps TPN MCCB 16 KA as incoming and 12 outgoing SP MCB's with magnetic locking system complete all as specified and as directed. Note: MCB SP Shall be measured and paid seperately of IndoAsian Cat Ref No 811888 & 830008 or equivalent in Standard/Havells as approved by GE.

M & L for chipping the wall for fixing of DB and plastering the distrubed surface along with putty and existing colour complete all as specified and as directed.

S and F sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and as directed. Make: Havells/Standard/IndoAsian

S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and as directed. Make: IndoAsian Cat Part No. 811122-29 or equivalent in Standard/Havells as approved by GE.

S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 40 Amps complete all as specified and as directed. Make: IndoAsian Cat Part No. 811152 or equivalent in Standard/Havells as approved by GE.

S & F in replacement Fancy type lights (Round Type) of 20 watts including LED lamp complete all as specified and as directed. Make: Philips Model SM251C LED20S - 6500 or equivalent in Wipro/GE as approved by GE.

S & F in replacement of 14 watts high efficient LED downlighter, PDC housing with luminarie system efficacy 110 lm/watts with IP & surge protection of 2.5 kV, power factor >0.95 complete with all accessories complete all as specified and as directed. Make: Philips Model DN296B LED15S of CCT:3000K/6500K or equivalent in Wipro/GE as approved by GE.

S & F in replacement of 33 watts high efficient LED 595mmX595mm recess mounting light fixture of CRCA housing with lumianrie system efficacy 120 lm/w with IP & surge protection of 2.5 kV, power factor >0.95 complete with all accessories complete all as specified and as directed. Make: Philips Model FULL GLOW RC380B LED42S-6500 or equivalent in Wipro/GE as approved by GE. Note: Cutting of False ceiling and removal of old fitting and re-arranging the False ceiling with existing size, Gypsum board/POP false ceiling is to be done if required. Cost of False ceiling work shall be included in the rate quoted. No extra payment shall be paid in this regard.

S & F in replacement of wall mounted batten type LED light of 12 watts with aluminium extruded batten and system lumens of 1200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and as directed. Make: Philips Model BN021 LED12S PSU GR or equivalent in Wipro/GE as approved by GE.

S & F of 10mm MS False ceiling Iron ring of size 2X2 suitable for POP/GYPSUM False ceiling and suitable for above mentioned recess mounting light complete all as specified and as directed.

S & F in replacement of wall mounted batten type LED light of 22 watts with aluminium extruded batten and system lumens of 2200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and as directed. Make: Philips Model BN021C LED22S or equivalent Wipro/GE as approved by GE.

S & F in replacement of Security Lights of 1x30 watt LED light with high power LED and unique peanut lens to ensure uniform distribution with suitable pipe bracket 32 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts including provision of 1.5 Sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and as directed. Make: Philips Model BRP046 LED 30 CW MR S1 PSU GR or Havells Model ENDURA SUNDOWNSL25LED765 PASYBOPCIHD or equivalent in Wipro as approved by GE.

S & F Surface Modular Box of 6 way along with 6 way Modular plate and 2 Nos of 16 Amps Switches and 6/16Amps multipurpose Sockets with connected internal wiring complete all as specified and as directed. Make: Indo Asian cat No. 800186, 800166, 800103, 800122 or equivalent in Anchor Roma/Standard as approved by GE. Note: Modular Plate, Switches & Sockets are inclusive of the rate quoted.

M & L for Submain wiring with two single core 2.5 Sqmm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 2.5 Sqmm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note:Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for Submain wiring with two single core 4 Sqmm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 4 Sqmm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note: Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for Submain wiring with two single core 6 Sqmm PVC insulated unsheathed FRLS copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of suitable dia medium grade including running up of two runs of 6 Sqmm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note:Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for Submain wiring with four single core 10 Sqmm PVC insulated unsheathed FRLS copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of suitable dia medium grade including running up of two runs of 10 Sqmm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable submain wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note:Four runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M&L for disconnecting the electrical connection, removing the copper line, discharge line of Split AC 1.5/2.0 Ton capacity including indoor and outdoor units and all accessories and shifting/re-installing and testing the whole unit of Split AC in new location and checking the leakage of Split type 1.5/2.0 Ton AC with the help of N2 Gas and after defecting and repairing the leakage, charge the sutiable refrigerant upto required level as specfied in suitable size and length of copper pipe and making the holes in wall complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point complete all as specified and as directed including testing on completion. Note: Item of earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.

M&L for disconnecting and removing ceiling/exhaust/wall fan of any capactiy any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan complete all as specified and as directed. NOTE: Necessary repairs/ replacement of unserviceable parts shall be measured and paid seperately.

Material and labour for rewinding of the ceiling/exhaust fan complete with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing of ceiling fan of any make and any sweep including taking out burnt copper wire complete all as specified and as directed. Note: Old winding material is property of the contractor and shall be considered against schedule of credit.

Supply & Fix in repair of Ball bearing/Brass bush of Ceiling/Exhaust Fan upto 300mm complete all as specified and as directed.

S&F in repair of Capacitor of Ceiling Exhaust Fan upto 300mm complete all as specified and as directed.

S&F rigid non-metallic PVC conduit 25mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete all as specified and as directed.

S&F rigid non-metallic PVC conduit 40mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete all as specified and as directed.

S&F rigid PVC Casing & Capping of 40mm wide complete all as specified and as directed.

Taking down the existing Fire smoke/heat detector of any size and refix the same at exact location after completing the work complete all as specified and as directed.

Taking down the existing Ceiling mounted Fire extinguisher and refix the same at exact location after completing the work with suitable anchor fastners complete all as specified and as directed.

A SOMA RAJU

SAI RUPA CONSTRUCTIONS

S.R.M.K Enterprises

BEEGEE DESIGN SYSTEMS