SPL REPAIR TO OR COOK HOUSE DINING HALL RATION STORE VEG STORE ( BLDG NO T 11) UNDER HQ 101 AREA (ORD) AND ADDN/ALTN TO KITCHEN AND GYM FOR BLDG NO MES 19 (RTC) AND PROVN OF TANK STAGING WITH MS STRUCTURE NEAR BLDG NO MES 24 PINE WALK AT SHILLONG

Amount

Dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed.

Dismantling wrought Iron or mild steel work of any description not other wise described complete all as specified and directed.

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and directed.

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and directed.

Taking down shutters of any description nexc 1.0 Sqm refixing in same opening complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete all as specified and directed.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and directed.

Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and directed.

M&L 25mm thick cement concrete using (20mm graded aggregate) type B-1 (1:2:4) as in sub base complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in floors including rubbing and pollishing complete including 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in steps, skirting, dado and pillars including rubbing and pollishing complete including 10 mm thick rendering in CM 1:4 all as specified and directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 2nd class HW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as directed.

M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed.

S&F framed wrok as in doors, or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including eithe hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rail and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for preparation of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified and directed.

S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed.

M &L glazed skeleton shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc 35mm thick of 2nd class hard wood complete.

S&F for 2nd class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 18/19 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed

S&F 0.90 mm thick pvc decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified

S&F brass 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F brass 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete

S&F extruded fancy type Brass handles fabricated type of size 100 mm complete

S&F butt hinges 100 mm extruded brass with mild steel hinge pin bright polsihed and fixed type B-11 complete

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm completre

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete complete all as specified and directed.

M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles nexc 0.36 sqm in floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and directed.

All as Per Item no 42 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified and directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm /300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15m thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws as in ceiling complete, complete all as specified and directed.

S&F aluminium snap grid frame work for false ceiling incl 6mm dia GI hanger (upto 1200mm length) adjusting level fixed to roof slab/truss/purlins/rafters @ 12.m C/C complete all as specified and as directed

M&L for 2nd class hard wood Plain fillets square , rectangular or triangular in section , clean swan secured with nails sectional area exc 13 sqcm nexc 25 sqcm incl dismantling complete.

S&F 5 mm thick PVC sheet fillet of 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing

S&F solid PVC wall panelling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifiecations and drawing

M&L for vitrified ceramic tiles dark shed, 10 mm thick(square /rectangular), polished, area of each tile n exc 0.36 sqm in floor etc , laid over 15 mm thick screed bed 1:6 ,set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified.

S&F 15 mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly -nuts, screwed for iron pipe and fixed.

S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed in repairs

M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall/ ceiling and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe complete all as specified and as directed.

All as per Item No 66 above , but for 20mm dia (Bore).

All as per Item No 66 above , but for 25mm dia (Bore).

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed.

Dismantling water tanks exc 500 ltrs but not exc 1000 ltrs capacity , complete all as specified

Supply hoisting and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed all as specified and directed.

M & L for preparation of new walls surface and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer and complete all as specified and directed.

M&L for for applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface on new or previously untreated surfaces all as specified and directed.

Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed

M&L for for applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surface surfaces and complete removal of existing treatment complete all as specified and as directed

M&L for Painting two coats of Synthetic enamel paint over a coat of primer on new wooden surfaces of any description, over 10 cm width or girth including preparation of surfaces all as specified and directed

M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coats of synthetic enamel paint complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old steel surface exc 10 cm width or girth incl preparation of surfaces complete all as specified and as directed

S&F Continous (Piano hinges), mild steel, bright finished of electrogalvanised width of flap when open,30m complete all as specified and as directed

S&F ball catches with 8 mm dia steel ball,& brass body & striking plate including letting in & fixed complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever barackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm

S&F Stainless steel kitchen plate rack of size 31" X 30' X 10" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable one etc complete all as specified and as directed. (Make : Blue star, Cat No - BSKPR-314) or equivalent make of Prayag.

S&F 15 mm bore CP sink mixer with regular spout (W/M) complete all as specified and directed (Make - Prayag, Cat No - 8455) or equivalent make of hindware / cera

M&L for PCC 1:3:6 type C-2(using 20 mm graded cr. stone aggr),75mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc. 2.00m complete all as specified.

M&L for Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces, including necessary formwork, fixing and set in CM 1:4 all as specified and as directed

M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends all as specified and as directed

Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as directed

Taking down shutters of any description nexc.1.0 Sqm each complete all as directed

Fixing only for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed

S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc complete all as specified and as directed

S&F 15/16 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed

S&F 12 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed

S&F extruded fancy type Brass handles fabricated type of size 150 mm all as specified and as directed

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and as directed

S&F butt hinges 100 mm medium weight mild steel cold rolled and fixed complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified

Prelaminated particle board of 12 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work.

M & L 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement to receive tile over it complete all as specified and as directed.

M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles exc 0.36 sqm but nexc 1.00 sqmin floors laid over and incl. 15 mm thk 1:4 screed bed jointed pointed with coloured cement to match the tiles.

All as Per Item no 100 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:3

M&L for 20-25 mm thk kota stone slab flooring over cement screed base 20 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing complete all as specified

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction.

S&F in repairs Brass CP angular stop cock fancy type with Capstan heads of make Jaguar/Marc/Parryware

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs , washers and wastes, incl bedding in cement moartor on to dwarf wall or incl fixing cantilever brackets and connecting union to pipe onerall size990x420 double bowl with size of 410x330x160mm complete all as specified and as directed

S&F 15 mm bore brass CP swinging mixer for mixing hot & cold water screwed down for iron pipe and fixed complete

S&F for stainless steel drawer box 500mm of any colour with provn for double rail rolling system complete all as specified and directed by Engr-in-charge

S&F stainless steel single cutlery insert 500mm long complete all as sspecified and as directed by Engr-in-charge

S&F for stainless steel swing try left or right complete all as specified and directed by Engr-in-charge

S&F for stainless steel carrousel 650 mm dia complete all as specified and directed by Engr-in-charge

S&F plain stainless steel basket of size 420x485x200mm complete all as specified and directed by Engr-in-charge

S&F plain stainless steel cup & saucer basket of size 520x585x100mm complete all as specified and directed by Engr-in-charge

S&F plain stainless steel perforated cutlery basket of size 470x485x100mm complete all as specified and directed by Engr-in-charge

S&F plain stainless steel grain trolley of size 525x485x350mm complete all as specified and directed by Engr-in-charge

S&F ball bearing drawer channel of size 600 mm long complete all as sspecified and as directed by Engr-in-charge

S&F for stainless steel soft spring system complete all as specified and directed by Engr-in-charge

S&F for clip on cabinet hinge full overlay complete all as specified and directed by Engr-in-charge

M & L RCC NOMINAL MIX (1:1.5:3) (20mm grade aggregate ) as in foundations , incl rafts, footings, foundation beams, plinth beams, bases for columns etc complete

S&F compound girders and stanchions,lattice girders ,aerial masts , staging for water tanks and the like incl caps, bases ,splices etc built up from two or more beam or channel sections or angles with plates including all lattice bars, stiffeners , gusset plates of Fe 290-W(Gde-E-165) etc complete

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

M & L 100mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for MS TMT bars 10 mm dia and over out to length, bent to shape required binding with and incl MS annealed wire not less than 0.90mm dia complete.

S&F 15mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed

S&F 20mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 25mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed.

Earthwork in excavation in foundation trenches n,exc1.50m wide and n.exc1.50m indepth and getting outin soft /loose soil and removing excavated materialn.exc 50m and depositing where directed at a level n.exc1.50m above the starting point complete all as specifed and as directed.

Returning filling in, including, spreading, leveling, watering and well ramming in layers n,exc25cm complete all as specifed and as directed.

Removing excavated material n.exc 50m and depositing where directed at a levelnexc1.50m above the starting point complete all as specifed and as directed.

AGE E/M SCHEDULE PART II Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, Sarface / semi conceled on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only) AMke of Cable - KEI/ Havells / Kalinga

Description all as per Srl item No.133 above but for socket outlet point 5 Amp on same board complete all as specified and as directed.

Description all as per Srl item No.133 above but for socket outlet point 5 Amp on Independent board complete all as specified and as directed.

Description all as per serial item No 133 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay

Supply and fixing modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor .

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all spcifided and directed.

S & F wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings

S & F Wall bracket decorative LED warm white /white type with lamp 12 Watt complete with necessary connection complete all as specified and as directed.

S & F LED down lighter fitting warm white /white type with lamp 18 Watt complete with necessary connection complete all as specified and as directed.

S & F Slim desingn LED recessed square PLUTO NEO 2X 2, 28 watt flat panel PDC aluminium housing and PMMA diffuser including taking down old unserviceable one all as directed and specified make- Philips full glow high efficiency

Supply and fixing LED flood light 60 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including suitable size bracket and connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete.Make- Philips/CG/Havells

Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCCB TPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.

S & F Exhaust fan 230 volts , 450mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall

Supply and fixing of hot water Geysers of 50 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation. Make : Havells cat part no - GHWCAMTWH025 : /LG/Ronald.

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric , hot and cold water pipe, tab etc and water connection and testing after installation. Make : Havells /LG/Ronald.

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete.Make Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one.

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed semi / safacee on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr deep for foundation, laying GI pipes and UG cables etc n exc 10 sqmtr on plan, in soft/loose or hard/dense soil and getting out complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L for providing dry river sand as in sand cushioning to UG cable including punning gently complete all as specified and directed.

Removing excavated material not exc 50 mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M & L Sub class'B' old size well burnt brick laid flat in trenches as protection to LT cable complete all as specified and as directed.

Supply and fixing GI Tubing light grade under road, on pole floor and on wall for cable protection complete all as directed for following sizes 40 MM dia bore

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications :-

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 10 Sq.mm 2 core , confirming to IS specifications :-

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No.169 above but for socket outlet point 5 Amp on same board.

Description all as per Srl item No.169 above but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 169 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one .

Supply and fix MCCB TPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection complete all as specified and as directed.

Supply and Fix reverse osmosis plant of out put capacity of 100 ltr per Hour. All type filter, membrane, rate include cost of civil wks PCC , raw water tank 500 Ltrs with pipe line/ clear water storage tank 500 Ltrs with pipe line, gate valve, stop valve, softener, plumbing and electrical works Complete all as basic requirement for running of RO plant specified and directed.

Supply and fix Switch socket combination 5/16 amp 5 in 1 universal complete all as specified and directed.

Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

S&F sheet metal enclosures with socket and MCB single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 240 Volt- 20Amp complete all as specified and as directed.

S&F bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fix Switch socket combination 5/16 amp 5 in 1 universal complete all as specified and directed.

Supply and fix Deep freezer hard top 200 Ltr complete all as specified and directed.

S&F angle stop valve cast copper alloy, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixing of size 15mm complete all as specified and as directed.

MS HO Shadap

M/s Hussain & Bros

M/s J. C. CONSTRUCTION