Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 CrAccepted-AOC | ₹10.7 Cr Quoted ₹13.6 Cr | L1 | Accepted-AOC Awarded |
| 2 | L2₹14.9 CrRejected-AOC | ₹14.9 Cr | L2 | Rejected-AOC Rejected due to rate are on higher side |
Tender Value
₹10.1 Cr
EMD Value
₹20.1 L
Closing Date
5 Oct 2020, 3:00 pmClosed
Executive Engineer
Behind PWD Rest House Jawhar Nagar Camp Palwal, Distt. Palwal (Haryana)
DPR FOR UPGRADATION OF EXISTING W/S SCHEME VILLAGE DEEGHOT DISTT. PALWAL
2020_HRY_142901_1
SE PWl No.9668 dated 03.09.2020
Open Tender
Civil Works
540 days
Palwal
Refer to the tender documents
3 documents required · 3 mandatory
₹20,000
Executive Engineer
₹20.1 L
Yes
22 Oct 2020
8 Sept 2020
5 Oct 2020
8 Sept 2020
5 Oct 2020
8 Sept 2020
Amount
Drilling of 609.60 mm dia bore by hydraulic rotary drilling (reverse circulation method) according to ISI specification No. 2800-1991 (Part-I) as amended up to date and modified to extent of the specification attached with this schedule of items of work in all kinds of soils and boulders up to 125 mm dia except rocky strata including the cost of all consumable stores, fuel, oil, soil stabilizing material and transportation of rig and other accessories to the site of proposed bore and back (including cost of lowering of all sizes of casing pipe while boring and extracting the same against earth frictions etc.) complete to the satisfaction of the Engineer-in-charge.
Supplying and lowering 219.10mm outer dia ERW steel pipes as per IS 4270/1992 as amended up to date, duly ISI marked for housing pipe in 4 to 7 meters random length with 88.90mm of threaded ends (8 threads to an inch or 25.40mm) manufactured out of 6.40 mm thick M.S. plates with required number of M.S. socket 177.80 mm with inside thread to match the pipe threads and made out of M.S. plate in to borehole in vertical position including cost of all scaffolding, derricks, Jim, poles, tools and plants, ropes, M.S. clamp embedded in foundation etc. complete in all respects to the satisfaction of the Engineer-in-charge of the work including cost of all cutting, threading of pipe where required and all sockets.The pipe shall be painted with anti corrosive paint and covered tightly with polythene.
Supplying and lowering of 200mm i/d Stainless Steel Screen cage type-V Wire wound screen as per IS 9110-2000, 4270-1992 & amp composition of material as per ISI 1012 with latest amendments equipments equivalent, thickness 8.00mm, tensile load 14000 Kg minimum ring thickness 7.00 mm slot opening 0.75 mm ISI marked & approved by the Department complete in all respects as per approved NIT.
Supplying as per IS: 226/1975 as amended upto date deodar wooden box made of 20mm thick wood size 60cmx30cmx75cm with lid and locking arrangement etc. for preserving the strata samples received from the bore as and when desired by the Engineer-in-charge.
Charges of Resistivity survey complete in all respects to the satisfication of the Engineer in charge at the proposed site giving result a scretaining quality, quantity of good water bearing strata and type & depth of geoligical strata complete in all respects
SUB HEAD NO. 2 - PUMPING MACHINERY & ELECTRICAL ITEMS(For 4 No T/Wells ( 400 LPM 60 Mtr Head) Supplying, erection testing and commissioning of submersible pumping sets as per BIS Specification No.8034-1989 (as amended up to date for pumps) and IS. 9283-1979 (as amended up to date for motor) the pump motor sets should be capable of pumping clear fresh cold water having Characteristics as specified in Clause-4 of IS. 8034/1989 and Clause 4.1 of IS 9283/1979 with submersible set motor model V-8 with pump. submerssible pump set, (i) 400 LPM/ 60 M. Head (of approved make ISI Marked) 10 BHP
Supplying and fixing following C.I. D/F pipe, CI specials, sluice valves with wheel, non return valves with G.M. Flap including cost of jointing materials, excavation, laying refilling including making adequate supports of masonry / concrete / steel for delivery pipe from submersible pump set up to 1.5 meter outside the outer wall of pump chamber as per plan shown as per specification given in Schedule No II. A) Detail of pipe and specials CI D/F Pipes a) 150mm i/d
S&E of Pressure Gauges with siphon cock as per IS:3624, & having 100mm dia, Dual Gauge, in delivery pipe inside Pump chamber
S&E of “Wall Mounting Type, solenoid driven, motor-less electro-magnetic diaphragm Dozing / Metering pump working on single-phase 220/240 V 50 Hz electric supply, with standard electronic controls, suitable for minimum dozing capacity 0 to 5 LPH at 8 bar back pressure”, complete with necessary accessories; Make-Fontus.a) 1 No. Voltage Stabilizer with each Dozing Pump b) 1 No. 300 Ltrs capacity ISI marked HDPE storage tank, with each Dozing Pump, of ‘Sintex’ or other reputed & approved make.
Supplying erection, testing of electric control panel board for T/wells in pump chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of Angle frame containing 1 Nos. fully automatic air brake Starter suitable for 12.50 HP Motor, Main switch of suitable range with HRC fuse, 1 No. Volt meter (0 to 500 Volts), 1 No. Amp. Meter of 0 to 32 Amp. , 3 sets of indicating lamp, Capacitor of suitable capacity & 1 No. single phase preventors with the timer switch including wiring in panel board & suitable Electric energy meter wiring from to Electric control panel board complete in all respect as per Specification given in Schedule No.II.
Supply, erection, testing and commissioning of horizontal spindle split casing type centrifugal pumping sets of following duties directly coupled to AC Squirrel cage induction type motor with starter and acessoried etc. complete in all respects all priming arrangement with complate base frame.as per latest ISI code ( Make Kirloskar/ Mathar & Platt/ crompton/ Jyoti worthington) 3500 LPM 45 mtrs head, with squirrel cage induction motor 1500 RPM, 3 phase 415 volt ± +10% 50 HZ± 5% of suitable rating (H.P.- 60 BHP/12 KW) 2 Nos ( One act as stand by) at B/Stn No. 1
2000 LPM 45 mtrs head, with squirrel cage induction motor 1500 RPM, 3 phase 415 volt ± +10% 50 HZ± 5% of suitable rating (H.P.- 35 BHP/12 KW) 2 Nos ( One act as stand by) at B/Stn No. 2
Supply and fixing following CI D/F pipe including cost of Jointing materials, excavation, laying, jointing, refilling including making adequate supports of masonry/ concrete/steel for delivery and suction pipe from bell mouth in the collecting tank up to the rising main laid by the deptt. as per plan shown from the foundation wall of the pump chamber for all the clear water pumping set at Boosting Station as per specification given in schedule No. II for A) Detail of pipe 150mm i/d
Supply and fixing following CI D/F pipe including cost of Jointing materials, excavation, laying, jointing, refilling including making adequate supports of masonry/ concrete/steel for delivery and suction pipe from bell mouth in the collecting tank up to the rising main laid by the deptt. as per plan shown from the foundation wall of the pump chamber for all the clear water pumping set at Boosting Station as per specification given in schedule No. II for A) Detail of pipe 200mm i/d
Supply Erection, testing & commissioning of equipment on HT metering panel 11KV consisting of one No. Electronic Tri vector Meter 3 Phase, 4 wire 0.5 class of accuracy on KW hour point basis complete with HT CTs of 20/5 Amp. 15 VA, burden and class of 0.5 accuracy & HT PT 11000/ 110 V, 15 VA, burden & class of 0.5 accuracy including metering cubical complete in all respect as described in Sch. No.I.
Supply, erection, testing & commissioning of standard make cubical meter box as per HVPNL specification complete in all respect
Automatic Power Factor correction factor panel 60 KVAR (as per schedule No. II) With automatic power factor correction device in various steps with incoming 200 Amp MCCB with complete a) 3 x 4 x 5 KVAR
Providing and fixing G.O. Switch with blade, pin, 6 Nos. insulator, operating handle with G.I pipe 25mm class B with 2 Nos. RCC poles complete in all respect
Providing and fixing of insulated rubber matting suitable for 11 KV installation 1 meter x 2 meter x 12 mm / As per panel SPEC for sites as per specification given in schedule No. II
Supply erection, testing of standard make Lighting in the Pump chamber with material upto 10 points including switch, button, plug, PVC pipe & wire etc.
Supply and erection testing & commissioning of exhaust fans each having a capacity of 45 cubic meters per minutes, complete with suitable G.I sheet ducting in meter room and pump chamber and energy for the sites.
Supply and erection testing & commissioning of (48'') 1200 mm sweep ceiling fans with G.I Pipe complete in all respects in pump house at Boosting stations
Providing at installation of 2 Nos. Non Clog sewerage Submersible pumping sets complete as given below at IPS Supplying of Non Clog sewerage submersible pumps.Model JSE-6, single stage, side delivery volume casing type, Pump efficiency BKW, Motror efficiency , rating 25.00/18.6/1450 RPM, "f" CLASS , Air fiill, ball bearing with 40000 Hrs life,Grease lubricated,solid Handling , Pump delivery size 150-250 mm,Type of motor TEWC, pump casing C.I.F.G.260, Implar 3-3-16, S.S- 410 shaft,SS-316, 415 Volts, 50 Hr, A.C. suppply, Star Delta, Thrmister & moisture sencer,IP-68/DUTY:81, Cable 10 m of required size, Auto coupling with intergal C.I.bend & ss Hardware-1 set, 50mm Galvanised guide pipe, M.S.Galvanised lifting chain with shackle 15 mtr length complete as per IS specification. .( Non Clog Submersible sewage pumps of 36 m3/Hr (DWF) with Head 15 Mtr. all other accessories complete in all respects.600 LPM)x 15 M. Head 5.00 BHP
Supplying and fixing following C.I. D/F pipe, CI specials, sluice valves with wheel, non return valves with G.M. Flap including cost of jointing materials, excavation, laying refilling including making adequate supports of masonry / concrete / steel for delivery pipe from submersible pump set up to 1.5 meter outside the outer wall of pump chamber as per specification given in Schedule No II. A) Detail of pipe and specials a) C.I. D/F Pipes i) 150 mm i/d D/F Pipes
Providing, and fixing of insulated rubber matting suitable for 11 KV installation 1 metre x 2 metre x 12 mm for site as per specifications .
Providing and fixing of exhaust fans each having a capacity of 45 cubic metres per minutes complete with suitable GI sheet ducting in pump chamber.
Providing and fixing of ceiling fans 48” i/d (1200 mm) with suitable GI pipe complete in all respects.
Construction of intercepting chamber in each house before connecting sewer line. Constructing brick masonary inspection chamber sizes as given below upto 0.60 mtr average depth in cement mortar 1:5 lime concrete Providing & fixing 4" PVC TEE complete in all respect.
Providing & Fixing M.S. Grating of size 450x450 mm complete in all respect.
FOR WATER SUPPLY Operation & maintenance for the complete scope of work mention in the DNIT (Disinfection material supplied by the PHED) as per schedule-IVfor a period of 5 year after 12 months during defect liability period 3 month trial run (will be charged to the A/Mtc. estimate). Operation & maintenance during defect liability period (operation only)
Operation & maintenance during 1st year after defect liability period
Operation & maintenance during 2nd year
Operation & maintenance during 3rd year
Operation & maintenance during 4th year
Operation & maintenance during 5th year
FOR SEWERAGE SYSTEM Operation & maintenance for the complete scope of work mention in the DNIT (Disinfection material supplied by the PHED) as per schedule-IVfor a period of 5 year after 12 months during defect liability period 3 month trial run (will be charged to the A/Mtc. estimate). Operation & maintenance during defect liability period (operation only)
Operation & maintenance during 1st year after defect liability period
Operation & maintenance during 2nd year
Operation & maintenance during 3rd year
Operation & maintenance during 4th year
Operation & maintenance during 5th year
Bidder Name
Amount
Sh.Jasveer Singh Dahiya
The Dikadla Coop Society Ltd.
The Dikadla Coop Society Ltd.
The Dikadla Coop Society Ltd.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid