Development of 9-hole golf course, including a driving range, typically in a beach front area of about 15 to 20 acres in VOC Port

Schedule - A - Civil Work

Clearing scrub Jungle and Surface dressing of the Floor. The rate including hire charges of all machineries, removing of all rubbish from site, lead upto 50m, transportat charges and labour charges etc., complete complying with standard specification.

Earth work excavation and desposting on banks with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stony earth and earth mixed with small size boulders etc., As per SS 20B excluding hard rock requiring blasting Inclusive of 17,23 shoring shuttering, baling out water where ever necessary 24 and including refilling consolidation etc., complete in all respects complying with relevent standard specifications and as directed by departmental officers.

Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 3 KM from site. The rate shall include loading into the tipper/ lorry, transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers.

Supply and fill 20mm single-sized aggregate and spread 150 mm depth as porous layer over putting areas

Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge. Back filling with available filling

Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge. back filling with brought from out side

Providing and constructing cast in situ hydraulic bored piles of specified diameter in M30 grade concrete using blended cement - slag cement with minimum cement content of 400kg/m³ in accordance with the structural engineers drawings and directions, but exculding reinforcement including cost of mobalization of all necessary plants, equipment's like piling rigs, temporary casing of appropriate length for setting out cardinal points and the removal of the same, boring in overburden, using bentonite mud circulation technique or any other method duly through all strata upto the foundation level of piles etc., complete all as approved by the departmental engineer. Further include dewatering, placing concrete by tremie pipe method, disposal of bored material outside the site. Including Chipping carefully cut off portion of piles as required without any damage to the piles and dressing the top and removing all the debris away from the site with out any extra cost as directed including the cost of all tools, plants, conveyance, all labour, lead and lift required etc .,Conducting standard penetration test to identify the refusal strata for atleast 1 pile in group and atleast 25% of piles, comparing with refusal strata as indentified in soil report and providing socketting into refusal strata by 1.00mt or into hard rock by 100% dia of the pile. (Length of pile for payment shall be measured up to bottom of pile cap). Pile 24'' Dia

Supplying and Filling with M - sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Laying the Plain Cement concrete 1:4:8 (One cement Four sand and Eight broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 40mm gauge for foundation and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., including laying,compacting curing etc.,complete complying with standard specification and as directed by the departmental officers. The rates inclusive of Centering ,shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts etc..

Construction of Wet Mix Macadam 250mm compacted thickness in two layers by providing , laying , Paving , and compacting of aggregate gradation satisfying to Table 400-13 of MORTH and satisfying the physical paraeteres as per MORTH Table 400-12, mixing in a Wet Mix Plant of 200 tonne capacity at OMC , carriage of mied material to work site and laid in sensor pavers to the required line and grade as per the drawing and compacted with vibratory roller of 8-10 tonne to achieve the desired density of 98% of Maximum dry density and as per the direction of the Engineer-In-Charge of work.

Providing and construction of Dry Lean Concrete Base course of 150 mm compacted thickness over a prepared sub base with coarse and fine aggregate conforming to IS 383 as per table 600-1 of MORTH specification produced in a batching plant and conveyed in tippers to the laying site with a moisture content as per the design mix and laid with mechanised paver finisher and compacted with a 8-10 tonne vibratory roller to the requisite grade and levels as specified in drawings with adequate curing by covering the surface with hessen cloth and keeping it wet for 7 days. The design mix shall be such that the average compressive strength of each consequetive group of 5 concrete cubes shall not be less than 7Mpa at 7 days. In addition the compressive strength of any individual concrete cube shall not be less tha 5.5 Mpa at 7 days. The concrete mix shall be proportioned with a maximum aggregate cement ratio of 14:1 where OPC is used and 12:1 where PPC or PSC is used. The minimum cement content shall not be less than 140 Kg/Cum of concrete. The rate shall include for all incidentals as specified in clause 601.12 of MORTH

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. For column etc.

Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, retainning wall drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. Golf Club

Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supply towards Supply and fixing of Teak Timber and Roofing Materials for madras terrace roof includes all necessary hardwares, adhesives etc complete as per the architectural drawing.

Supply towards Supply and fixing of Cement sheet with Flat & Pan Tiles or Manglore Tile over Flat Tiles without roof timbers rate includes all lead, transport, labour, materials etc complete.

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. Golf Club

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 100 x 200 mm of solid cement concrete blocks, with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. Golf Club in Compound Wall

Supply and constructing of wood decorative pillar as per the design and choice of EIC. Rate includes proper fixing and top support fixing. Rate also includes polishing the same

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine P.sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering 15 mm thick for external surfaces with cement mortar 1:4 ratio (1 of cement : 5 of fine P.sand) including water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Painting the Wooden Ceiling with Two coats of first quality Enamel paint of approved colour over one coat of wood primer including thorough scraping, clean removal of dirt. The rate includes cost of materials, brushes, sand paper, rollers, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Supply and painting of two coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer. Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.(Ceiling & Internal surface)

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supplying and laying precast Rubber Moulded hydraulically pressed cement concrete paver block with pattern design of 50% colour and 50% Plain made of M40 grade concrete - 83 mm thick of approved quality and colour, over the filling manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer-in-charge.

Supplying and laying precast cement concrete Grass paver block with provision of grass 50%, 50% Grass pvaer and 50% Plain made of M40 grade concrete - 83 mm thick of approved quality and colour, over the filling manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer-in-charge.

Supplying and laying Naturally available Cobblestone of various size laid in circular motion - Grnaite stone machine cut of 50mm thk, Rate includes escavation for 150mm, laying and compacting a thick gravel base for 100mm for stability and drainage, followed by a 50mm sand bedding layer for the pavers.

Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X125X300mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The rate including Cost of all Matrials , Labour Charges , Wastages , Transportation Charges Loading Unloading Charges and Including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining Etc Complete .

Supplying and laying of Flooring with Joint free double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. (Including Skirting)

Providing Ceramic tiles of size 305 x 305 x 6mm flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supplying and fixing Dadooing the wall with Brick Tile of approved quality, colour and design joint free of size 100 x 230 x 6mm thick of approved make, in all walls of Billiyards Room using ultra Adhesive Grout 6mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply & Laying with the best quality approved Wooden Flooring or Sports Flooring over existing screed flooring as per site condition. Flooring plank of size 50 x 50cm 98% natural raw material as per the company specification. Rate incldues Marmoleum fixed using 414 Euroflex Lino Plus adhesive, applied with a 2mm x 6mm V notched or B1 trowel. Rate includes Proper subfloor preparation it must be level, clean, dry, temperature, and humidity control. Installation step step with one sheet at a time, Roll the sheet with a 68 kg roller to ensure proper bonding as per approved pattern / design as per the drawings by using irrespective of size and shapes including finishing the joints with Heat Welding or conventional method. Rate including all materials labour Charges, wastages, Necessaryleads & lifts working at all levels transportation charges loading and unloading, preparation of surfaces, necessary hacking in RCC surfaces cutting to required shape tool, and plants fuel, curing, cleaning finished surfaces, protection using plastic sheet and removing the same before handling over as complete with all respects complying with relevant standard specifications and as directed by the Client/Engineer in Charge

Supply and Laying flooring with best quality approved colour 18mm thick Flamed Steel Grey Granite Slab for Staircase of available size not less than 1220 x 600 mm machine cut and set in C.M 1:4 (1 of cement: 4 of manufactured sand) 20 mm thick topped with white cement slurry (for surface contact of the bottom of the granite slab) as per approved pattern, including finishing the joints with matching shade, cement slurry, cutting, edge chamfering and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading. preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, antiskid grooves,tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum/Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-incharge.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying and fiting the sunken slab area by Broken bricks by adding CICO NO 1 or approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE Acrylic Polymer Based Waterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 13 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturer's specification after entire completion of laying pipes, sanitary fittings etc. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc as complete with all respects complying with relevant standard specification and as directed by the Client/Engineer-in-charge. Including applying two coats not less than 2 mm thick of TAPECRETEAcrylic Polymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 13 mixed with approved water proofing compound like CICO No.1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturer's specifications and as directed.

WPC Door frame : Specification: Providing factory made Pre Laminated WPC Door Frame of the size 100 X 60mm with a Density of 900 kg/cum wall thickness of 11mm made out of 70% of virgin polymers, 15% of mineral fibers and rest 15% of additives and requisite chemicals. with 6nos of 5mm long screw. The door frame shall be fixed to the wall by using 80 mm long screws through the frame frame with the help of PVC Complete complying with the standard Specification. the door frame should be got approved from the Executive Engineer before use on work

Providing & fixing at site Flush door shall be of 32.0mm Commercial grade flush door with 1.0mm lamination on both the sides, and central portion to have 8.0mm plain float glass to be fixed with help of teak wood beadings. The Door is to be fixed to existing wooden partition/wall with heavy duty 5" Stainless Steel hinges, and shall have godrej Or equivalent mortice lock. All the edges of the door to be covered with 35 x 12 mm Teak wood beadings, The cost shall include Frame of 1st class Teak wood Frame of 150mm x 50 mm, all labour, materials, mortice lock, tower bolt inside, door stopper, Door Closer strictly as per the given design & drawing etc complete.

Providing and fixing at site 12.0mm toughened glass fixed glazing to be fixed with SS patch fittings at the site including filling of silicon sealant at all edges, gaps, wherever necessary as per the site condition, all materials, labour etc complete.

Providing and fixing at site 12.0mm toughened glass door with all necessary patches, Floor Spring, Handle, lock. Rate also includes silicon, Profile all materials, labour etc complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

UPVC Ventilator Specification: Supplying and fixing UPVC (Un- Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Providing and fixing welded M.S. grills to the window openings,along the details as per drawing with necessary screws, bolts and fixed with necessary M.S. lugs embedded in masonry with C.C. 1:2:4 and finishing the surface neatly. Rate shall welding and consumables, etc. complete, as directed. Design of grills and the size of members to be used shall be got approval before put into use & as directed by the Engineer-in-charge.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. ( The make quality and colour of paint should be got approved by the executive Engineer before use on works.)

Supply and fixing of signage board at required places of specified size,directed by the departmental engineer in charge,the rate is inclusive of all labour charge, fixing and transportation etc.complete

Erecting Golf net up to 30 Meter height and range including labour, machinery, transportation, dismantling & rolling old/torn nets, making repairs to usable nets, fixing in position up to the requisite tension, tying with required number of wind-ties, making any special arrangements, hiring of boom crane, hiring charges & erecting/dismantling of safety net/equipment all complete as per direction of Engineer in-charge. The work may have to be paused due to playing schedule of golfers or due to weather conditions. No extra payment shall be made for any account.

Providing & fixing Greenlam Sturdo Air Collection- Whirl Restroom Cubicle of following standard dimension which includes 700mm door size width self-supporting 18mm thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Greenguard-Gold standards. This also includes providing and fixing in position necessary hardware made out of Stainless steel (Grade 316), Aluminium 6063 -T6 and Anodised Zinc Diecasted as per manufacturer’s specifications & Architects instructions like (1) SS Spring Loaded Hinges (2) Zn Slide Bolt with Occupancy indicators (3) Zn Coat hooks (5) Aluminium anodised U- F Channels (4) SS Shoe Box (5) SS grade 316 RAB (6) Rubber noise deafening tape, (7) Screws & wall Plugs. All screws will of 316 Grade in stainless steel . All pilasters are supported by stainless steel shoe box. The base of the stainless steel shoe box will be anchored to the floor with a clearance height upto 100mm Toilet Cubicle with standard dimension of 1840mm Ht x 1200mm x 1200mm, 700mm door size width).

Providing & fixing Greenlam Sturdo Air Collection- Whirl Restroom Cubicle of following standard dimension which includes 700mm door size width self-supporting 18mm thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Greenguard-Gold standards. This also includes providing and fixing in position necessary hardware made out of Stainless steel (Grade 316), Aluminium 6063 -T6 and Anodised Zinc Diecasted as per manufacturer’s specifications & Architects instructions like (1) SS Spring Loaded Hinges (2) Zn Slide Bolt with Occupancy indicators (3) Zn Coat hooks (5) Aluminium anodised U- F Channels (4) SS Shoe Box (5) SS grade 316 RAB (6) Rubber noise deafening tape, (7) Screws & wall Plugs. All screws will of 316 Grade in stainless steel . All pilasters are supported by stainless steel shoe box. The base of the stainless steel shoe box will be anchored to the floor with a clearance height upto 100mm Toilet Cubicle Front Partition with Door

Fire Extinguisher: Supply and fixing of Water CO2 stored Pressure Type 9 liters capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the Departmental Officers. - SOR - BD 950

Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., Including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY / FIRST / EQUIVALENT - SOR - BD 991

Schedule - B - Landscaping Plantation work

Supply and fill ground carbonate of lime for spreading on greens, tees, fairways and rough at 20kg / 100m2

Shrubs, Hedges, Shrubbery and Groundcover Plantation : Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m, lift up to 1.5m complete. Hedges

Shrubs, Hedges, Shrubbery and Groundcover Plantation : Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m, lift up to 1.5m complete. Shrubs

Providing well grown Creepers with Pot, Creepers with healthy, vigorous, free from diseases and pests, well-developed and healthy root systems is essential with good soil and required manure. Rate includes wires, nets for the creepers to crawl around the aluminium pergola. Density of pergola minimum 10 nos per rm. Rate includes maintenance till handover.

Providing well grown trees with minimum average girth of 10 cm and minimum height of 5 M above finished level after plantation of specified variety , at desired location & at specified distances. Achieving finished grade level. Planting the tree with appropriate anchoring, levelling the top soil surface as specified after plantation, staking to balance the tree. Including transport to the site & planting , preparation of tree basin, watering & maintaining for 1 month after completion of plantation and replacement of casualties till 1 month.

Providing, Fixing,Testing & Commissioning of Drip Pipe irrigation system with all necessary fittings, pumps and related civil works, including all labours, all complete

Providing and laying Precast Seating 1500mm X 890 mm 80mm thick slabs using M30 grade of concrete.Reinforced suitably to promote long use and to prevent damage during handling, transportation & erection each bench consists of 2 nos L - Shaped base support in Cement colour back height 890 mm front height 450 mm and base width 690mm and 1 nos. reinforced concrete plank in red colour of size 1500mm X 425mm X 50mm and bench top & back planks are treated with special anti - corrosive, water proof coating so as to make surfaces glossy and water proof the cost includes material cost, labour charges, transport charges etc.,as directed by Engineer-in-Charge

Supply and fixing of 120Litre Heavy duty trash can with specially designed bottom for minimizing the breakage and UV protested colour from sun rays. The trash can is fitted with wheel at bottom for easy mobility. The strong lid with smooth curved upper surface for perfect fit to ensure preventing unwanted smells to escape and rain water to seep through. The rate is inclusive of transportation, laoding and unloading charges.

Supply of Compactor 1100 Litres Bin made of galvanized Sheet, thickness of 2.5 mm, side and bottom 3 mm , MS angle and MS channel and 8" heavy duty fibre wheel as directed by the department officers. The cost includes the labour charges, transportations all complete as per Engineer in Charge

GRAVEL : Supply, deliver & install 60mm thick gravel layer on bidum geotextile and gravel fix (to later detail) Bidum to be included in price

Schedule - D - INTERIOR WORKS

Curved Seating at Mens Locker Room 1: Supply and Fixing of Curved Seating as per the architectural drawing and 3d view. Curved seating is made of 50 x 25mm MS Power coated Legs and Top with 19mm BWP ply finished with 1mm laminate. edge bading finished with 2mm matching the approved laminate. Rate incldues all material, Labour, Polish, support work, transport, shifting of materials etc complete.

Locker Room Storage: Supply and Fixing of Storage Rack with lock facility made of 19mm ply finished with 1mm laminate fo approved shade, color, texture on all visible surface, Carcase made of 19mm ply finished with .8mm laminate as per the drawing. Rear ply can be of 8mm with 2mm acrylic as water protection. Rate includes all hardwares like hinges, lock etc complete. Size - 1.5M x 2.4M - 3.6 SqM

Golf Bag storage: Supply and Fixing of Storage Rack with bag hanging and placing facility made of 19mm ply finished with 1mm laminate of approved shade, color, texture on all visible surface, Carcase made of 19mm ply finished with .8mm laminate as per the drawing. Rear ply can be of 8mm with 2mm acrylic as water protection. Rate includes all hardwares like sof closing channel, hangers etc complete. Size - 2M x .5M x 1M (Height)

Reception - Reception Desk : Supply and Fixing Recetpion Table finished using 1mm Core Laminate over 19mm Ply as per the drawing. On all internal surface finished with 1mm laminate over 19mm ply. Laminate as per the architect choice. 150mm Projection for cove finished with Walnut laminate. Rate includes Acrylic Letters with back lit, Flexi ply, Flexi laminate, hardwares like channel, Hinges, kyboard tray, trolley, screw, adhesive all Material, Labour, lead shifting etc complete.

Low Height Storage: Supply and Fixing of Low Height File Storage as per the design. Storage made of 19mm ply finished with 1mm laminate fo approved shade, color, texture on all visible surface, Carcase made of 19mm ply finished with .8mm laminate as per the drawing. Rear ply can be of 8mm with 2mm acrylic as water protection. Rate includes all hardwares like hinges, lock etc complete. Size - 1.5M x 2.4M - 3.6 SqM

Display Shelves: Supply and Fixing of Display Shelves with Openable Glass shutter. Carcase made of 19mm Ply finished with 1mm of approved shade, color, texture on all visible surface, as per the drawing. Rear ply can be of 8mm with 2mm acrylic as water protection. Rate includes all hardwares like hinges, lock, Glass etc complete. Size - 1.8M x 2.4M - 3.6 SqM

Cash Counter: Supply and Fixing of Cash Counter with credenza unit as per the design. Counter made of 19mm Ply finished with 1mm of approved shade, color, texture on all visible surface, as per the drawing. 75 mm skirting is recessed on all side by minimum 75mm and finished with 1mm laminate. Rate includes all hardwares like hinges, lock, Credenza unit, Keyboard tray, CPU Trolley etc complete. Size - 2.6m x 0.6m x 0.75m (ht)

Workstation : Supply and Fixing of Modular Workstation, Workstation top made of 19mm ply finished with 1mm laminate. Workstation Legs are amde of aluminum finish white power coated. Rate includes Glass divider. Rate also includes keyboard tray, CPU Trolley etc complete. Size - 1M x 0.6M x .75M (ht) + 0.3M Glass Height

Manager Table : Supply and Fixing of Modular Manager Table with side storage - Table and Storage made of 19mm ply finished with 1mm laminate on all visible surface and .8mm laminate on all internal / invisible surfaces. Storage with mid shelves made of 19mm ply finished with .8mm laminate. Rate includes keyboard tray, CPU Trolley etc complete. Size 1.8m x 0.75m + Side Storage - 1.95m x 0.45m x .7m

Conference Room - Conference Table: Supply and Fixing Conference Table, Top finished with 1mm Laminmate over 19mm Ply, Double facia with 40 x 2mm Edge band. Table legs are of 9mm Flexi ply shaped to round and support as per the drawing. Flexi ply also finished with 1mm laminate, Raceways and Modesty are of 19mm ply finished with .8mm Laminatge on both sides. Rate includes flip flop box, Vertibrae, Labour, all lead transport, Shifting etc complete. BR. Laminate 900 Rs. Quartz - 500Rs Sixe 3300 x 1000 x 750mm (ht)

Wooden Wall Panel - Supply and Fixing of Laminated wall Panel made of 12mm ply finished with 1mm laminate on visible surface. !2mm Ply is supported using 19mm ply fixed on to the wall. Plywood should be of phenol bonded, BWR grade Anti-termite proof and best quality, Non visible surface of the ply is finished with Wood primer. Screw holes is covered using same laminate buttons. Rate includes all support ply, Cove Provision, adhesive, shifting of materials, transport etc complete.

Backlit Flex Wall Panel - Supply and Fixing of Aluminum Boxing with LED Strip of oshram brand for backlit. Flexi banner UV Printed as per the design. Rate incldues Adapter, installation etc complete.

GYM Equipments

Receiving Area - Cost towards supply of 3 seater + 2 x 1 Single seater sofa with Center table as per the image. Rate includes all lead transport, lifting etc complete.

Admin Waiting Area- Cost towards supply of 3 seater with Center table as per the image. Rate includes all lead transport, lifting etc complete.

Billiyards Room - Cost towards supply of 2 seater with side table as per the image. Rate includes all lead transport, lifting etc complete.

Dining Table - Cost towards supply of 4 Seating square Dining Table 90cm Made of Black power coated round 2" MS Leg and supports, Top finished with 20mm Granite

Office or ergonomic chairs - Cost towards supply and fixing of high-end chairs with a tall, high back, finished premium materials Like faux leather. luxurious padding and formal, sophisticated aesthetic prioritize comfort with flexible support and ergonomic contouring for longduration use. Executive Chair with High Back

Office or ergonomic chairs - Cost towards supply and fixing of high-end chairs with a tall, high back, finished premium materials Like faux leather. luxurious padding and formal, sophisticated aesthetic prioritize comfort with flexible support and ergonomic contouring for longduration use. Executive Chair

Office or ergonomic chairs - Cost towards supply and fixing of high-end chairs with a tall, high back, finished premium materials Like faux leather. luxurious padding and formal, sophisticated aesthetic prioritize comfort with flexible support and ergonomic contouring for longduration use. Visitor Chair

Pool Billiards Table - Cost towards supply of 50" x 100" Tournament Standards Table. As per the specification of World Pool-Billiard Association (WPA)

Bar Counter - Bar Counter as per drawing with Supply of Bar Seating - Bar counter top made og 20mm granite with counter finished with 1mm laminate over 19mm ply. Rate includes carcase made of 19mm ply finished with .8mm laminate, Bar open shelves support are of SS power coated with 8mm T.Glass shelves. Rate also includes back storage witgh Granite top

Schedule - C - Plumbing Works

Supplying & fixing in position 75 mm tile drains on a 25 mm bed of 10 mm aggregate fort every 300sqm , Rate includes angle junctions 75 mm on 100 mm, 75 mm to 100 mm taper as per the requirements.

Supplying & fixing in position 15 mm dia brass/ C.P screw down / C.P Pillar Tap (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work). 15mm dia CP Pillar Tap (IWC)

Supplying, laying and jointing CPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level) (Internal Water supply) 20mm Dia Cpvc Pipes

Supplying, laying and jointing CPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level) (Internal Water supply) 25mm Dia Cpvc Pipes

Supplying and fixing in position the best quality and variety sizes PVC Soil/ Waste /Rain water pipes 6Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the dismantled portions to the original condition complying with standard specification. (Internal, External & Rain water system) 110mm Dia

Supplying and fixing in position the best quality and variety sizes PVC Soil/ Waste /Rain water pipes 6Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the dismantled portions to the original condition complying with standard specification. (Internal, External & Rain water system) 75mm Dia

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making good the dismantled portions to original condition with necesscary brick work and plastering wherever necessary scaffolding charges above ground level upto 4 m height. (Internal,Terrace&External Water supply ) 32 mm Dia Upvc Pipe

Supplying, laying and jointing HDPE pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing fittings, Laid on to the subsoil with proper protection. 32 mm Dia HDPE Pipes

Supplying, laying and jointing HDPE pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing fittings, Laid on to the subsoil with proper protection. 25 mm Dia HDPE Pipes

Supplying & fixing in position first quality & approved variety of various dia Gun metal Gate valves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements. 32mm dia

Supplying & fixing in position first quality & approved variety of various dia Gun metal Gate valves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements. 25mm dia

Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. (Internal Toilet Entry & Terrace) 32mm dia

Supply, erection, testing and commissioning of Gun Metal Non-Return Valve of size 50mm dia including necessary MS flange of table’E’, gaskets, bolts & nuts, etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying, fixing and incidental charges etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER /EQUIVALENT. 32mm dia

Supplying & fixing in position C.I.Nahini trap /Floor trap of various sizes with best stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes as directed etc., complete, complying with standard specification (The C.I.Nahini trap should be got approved by the Executive Engineer before use on works ).

Supplying and fixing Back Inlet Urinal(white colour) of Jauqar Make with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple, and suitable screws, shellac etc., complete. The rate including cost of all materials, labour charges for fixing and transportation etc. completed as directed by Engineer-in-Charge. URS-WHT-13253N

Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with 'P' trap or 'S' trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipes cement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works) JAQUAR ORISSA PAN

Supply and fixing in position white European Water Closet of Jaquar make with Soft close double flapped seat cover, pan connector with comprising the P- trap/"S" trap, C.P brass hinges and including labour, all fittings, making the required size including cutting the wall, and fixing the flushing cistern properly, redoing the plastering and packing the wall with smooth finish, the side gap between EWC mouth and pan connector to be filled with silicon sealant etc.complete, complying with standard specification and as directed by the Department officers. The quality and make of EWC should be got approved by Concern department Engineer before use on work. complete complying with standard specification and as directed by the Departmental officers KUS-WHT-35851S300UF

Wash Hand Basin of size 565 x 425 x 140 mm with all accessories such as 32 mm Dia C.P. Waste coupling, Rubber plug, Bottle Trap, Silicon, White Cement etc., KUS-WHT-35935

Supplying and fixing in position Mirror of size 900x750mm of approved quality and brand of size with necessary plastic back PVC frame with bottom stand of approved color with brass screws rowel plugs etc complete complying with standard specification and as directed by the Departmental officers The quality of mirror should be got approved by the Executive Engineer before use on work

Supplying and fixing the best quality approved make of bip cock with C.P health faucet wall hook one metre long fixable tube,angle cock with wall flangle including cutting and making good the walls whewrever requred etc complete, complying with standerd specification and as directed by the department officers. the quality and make of health faucet should be got approved by concern department Engineer before use on work.

Supply , installing, Testing & commissioning 15mm nominal bore CP brass angle valve of approved make or equivalent as directed by the Engineer-in-charge.

Supply , installing, Testing & commissioning CP Wall Mixture Tap 3 in 1 system with Hand Showers of approved make or equivalent as directed by the Engineerincharge.

Supplying and fixing best approved best quality Soap Dispenser complete complying with standard specifications. (The soap Dispenser should be got approved by Executive Engineer before use on works).

Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing Jaquar NEON 3 Seater SPA TUB 600ltr - Rate includes Thermostatic bath and Shower Mixer (FLP-CHR-5677PM) deck Mounted motor, drain connection, water inlet connection etc complete.

Supplying and fixing Jaquar Kubix Prime 1 Seater SPA TUB - Rate includes Thermostatic bath and Shower Mixer (FLP-CHR-5677PM) deck Mounted, motor, drain connection, water inlet connection etc complete

Supplying and fixing Jaquar Rain Showers (OHS-CHR-1649) includes all labour, material, extension rod, support etc complete.

Supplying and fixing Sauna Bath Heater Stainless Steel with Digital Control Panel - 12 KW

Supply and Fixing of BIO Septic Tank - 6000 Ltr Capcity Rate includes maintanance till project completion

Hydropnuematic System - for CLUB Toilet and RO UV Water Cooler

Supply fixing, texting and commisioning of RO UV Water cooler with 120 ltr capacity of 3 faucet, 90 LPH Purification capacity, min 3 stage water purification. The rate includes the cost of Material, labour charges, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Schedule - E - Providing Electrical Installation with Lighting arrangements, CCTV System and PA System for Golf Course and Golf Club, VOC PORT

Metering Panel - Supply, Installation, Testing and Commissioning all metal floor mounted meter board incorporated with the following. The cost of the foundation channels shall also be including in the rate. The Cost shall also includes unloading and positioning.3Nos.250Amps TP cutouts with 200Amps neutral link propoersly fixed on the sheet steel with necessary accessories with 200Amps 4P Aluminium Busbar. The Phase busbar shall be 50x6mm and the neutral busbass shall be 50x6.The Board shall be provided with 2Rus of 25x6mm Aluminium busbars of earthing.Space for fixing 7Nos of direct operated three phase energy meter with necessory accessories.6Sets of 3Nos. 32A TP cutout with neutral link properly fixed on the sheet steel.1Set of 3Nos. 200A TP cutout with neutral linkls propoerly fixed on the sheet steel.7Sets of interconnection between the coutout,MCB and the Meter shall be dobne with 50Sq.mm Cu and 16Sq.mm.Cu PVC insultated strandard copper conductor wires with crimped type lugs / sockets, etc.RYB indicating Lamps of LED Clustered type and Control toggles switch per each phase shall be provided for the Main EB cut-out chamber door. CRCA sheet Thickness : 14SWG for door and Frames 16SWG for others. Foundation Channel - 3mm thick Cable Gland - 14SWG Painting: Powder Coated RAL 7032 and Black Color for the foundation channel.

Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter 1no and 1no 250A Four Pole Change Over Switch, Main 1no EB source Incoming 250A 4Pole MCCB and Main 1no DG source Incoming of 250A 4Pole MCCB's, and 1no 125A 4Pole MCCB, 7nos of 63A 4Pole MCCB's for O/G with suitable copper bus bar (33x6mm) having three phase Multifunction meter with line indicators for erecting the indoor panel board complete etc., The rate is inclusive of transportation charges etc complete. The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal) with 1 no.125A 4P MCCB switch as incoming and 2 nos.63A 3P MCB, 6 nos.32A 3P MCB, as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End.

Supply and fixing of 7 segment 8 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 12 ways in one segment) (3 x 8 ways in each segment) and seperate provision for MCB / Isolators ( totally 24 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. (Without ELCB).

Supply and fixing of 7 segment 12 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 12 ways in one segment) (3 x 12 ways in each segment) and seperate provision for MCB / Isolators ( totally 36 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. (Without ELCB).

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End (SD-617 )

Supply and fixing of 8way Single pole and neutral MCB sheet steel enclosure with IP 42 protection distribution board double door with 1no. 32A DP MCB as incoming and 6Nos of 10A SP MCB for Outgoing in flush with wall and making good of the concealed portion with earth connection only The MCB DB and MCB's should be with ISI mark. ( Like MDS / Legrand make ) (SD-167)

Supply and fixing of 8way Single pole and neutral MCB sheet steel enclosure with IP 42 protection distribution board double door with 1no. 32A DP MCB as incoming and 3Nos of 20A DP MCB for Outgoing in flush with wall and making good of the concealed portion with earth connection only The MCB DB and MCB's should be with ISI mark. ( Like MDS / Legrand make )

Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD-751)

Supply and Clamping of 31/2C x 70 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-225)

Supply and Clamping of 31/2C x 35 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-223)

Supply and Clamping of 31/2C x 25 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-222)

Supply and Clamping of 2C x 10 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-216)

Supply and Clamping of 2C x 6 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-215)

Supply and fixing of brass cable gland for 31/2C x 120 Sq.mm PVC LTUG armoured cable with earth connection ( SD - 191)

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection ( SD - 189)

Supply and fixing of brass cable gland for 31/2C x 35 Sq.mm PVC LTUG armoured cable with earth connection ( SD - 187)

Supply and fixing of brass cable gland for 31/2C x 25 Sq.mm PVC LTUG armoured cable with earth connection ( SD - 186)

Supply and fixing of brass cable gland for 2C x 10 Sq.mm PVC LTUG armoured cable with earth connection ( SD - 182)

Supply and providing cable end termination of 31/2C x 120sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. (SD-240)

Supply and providing cable end termination of 31/2C x 70sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. (SD-238)

Supply and providing cable end termination of 31/2C x 35sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. (SD-236)

Supply and providing cable end termination of 31/2C x 25sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. (SD-235)

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 meter rod with fan clamp with side plates and cross arm of size 450mm(18") (SD-106)

Supply and fixing of 300 mm (12") sweep (heavy duty) AC exhaust fan complete with provision of holes in the wall including all required accessories. (SD 114)

Supply and fixing of 450 mm (18") sweep AC Wall Mounting fan complete fixed on the wall surface. The above fan fixed to using coche screws, plugs et complete.

Wiring with 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable MS conduit pipe on wall and ceiling with MS accessories GI metal back box and 6A modular switch in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, for making good of the concealed portion with suitable colour for PVC concealed point (length of point 9 to 14 mtr) (SD- 243)

Wiring with 2R x 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Light / Fan point.(6Points / Coil) Lower end (SD 314)

Supply and run of 2 of 2.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection 1 of 1.5sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe in wall and ceiling with continuous earth wire connection 1 of 2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade and making good of the concealed portion with suitable colour. (SD-430)

Supply and fixing of 25A DP plug and socket in the sheet enclosure with 25A DP MCB in flush with wall with earth connection.(For AC Plug)

Supply and Installation of 16 TR Non Inverter Ductable Unit outdoor type 410 Gas invertor Model. Rate includes all necessary fabrication work, Installation of copper pipes From Indoor to Outdoor (20 G) units with 13mm Insulations, Electrical wire between Indoor and outdoor with 4core 2.5Sq.mm Cord wire (Orbit Make) with PVC pipes. FRP tape for exposed copper pipe. Rate includes scaffolding, handling etc complete. Rate also includes Expansion Valve, Butter fly valve, Supporting Work

Supply and Installation of 48 TR A.H.U Indoor Gas - invertor Model. Rate includes all necessary fabrication work, Installation, Testing and commisioning of A.H.U, Air Filter, Valves etc complete. Rate includes EB panel etc complete. AHU Starter Panel - Motor - Eb Panel all inclusive

Supply, Installation, Balancing & Commissioning of factory fabricated pre insulated double walled spiral flat oval duct as per SMACNA with smooth streamline inner surface & standard spiral lock seams complete with elbows, vanes etc. including 19 mm thick class 'O' nitrile rubber insulation. The suspension arrangement shall be with wire rope hangers & stainless steel zip-clip arrangement as per specification & as required, Rate includes Disfuser, Flexble connection, Damper etc complete

Supply and Installation of AHU Assembly and Control pannel/sensor wiring, Star 3 Phase Delta Starter for Indoor Unit

Supply and fixing of manufacturer's GI metal back box and 6A modular switch, 6A 3 pin and 2pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall. (SD 462)

Supply and fixing of manufacturer's GI metal back box and 16A modular switch, 6/16A 3 pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.(SD 486)

Supplying and concealing modular type RJ socket with top pin with suitable with concealed type manufacturer's GI metal back box and modular socket in flush with wall mounted on poly carbonate front plate with socket mounting metal parts, for making good of the concealed portion with suitable colour.

Supply and laying of following size PVC/ MS conduits in floor /wall/ ceiling etc. including necessary bends, elbow, etc, inconcealed system below the false ceiling on wall / floor and open system on above falseceiling. (for general purpose & forwork station etc.) The rate shall includes minor civil works such as floor cutting, chipping, plastering and to make good finished surface to match with the original surface etc.,

Supply and fixing of 120 nos LED Strip Light with Concealed proifle on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 9W LED 3000 K Round type upward throw landscape light on soil with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 12W LED 3000K 2 way Wall Washer Square type UP and DN throw on Walls with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of Bar Drop Light pendant type 4000K 40W from ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of Pendant type 1 4000K 15W from ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of Pendant type 2 4000K 10W from ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of Pendant type 3 4000K 12W from ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of Pendant type 4 6000K 20W from ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of Wall Mounted Antiq type 4000K 15W from walls with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 2M Track light with 4 fittings 15W LED 4000K droppped from ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply, installation, testing and commissioning of 20 W LED tube light fitting with cool day light made out of CRCA powder coated body, poly methyl meth acrylate (PMMA) diffuser, glare free light, Suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories etc., complete.

Supply, installation, testing and commissioning of 100 W LED FLOOD LIGHT FITTING with cool day light suitable for surface / recessed mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories etc., complete.

Supply and fixing of 9Mtr height Seagull Mega pole with Single arm 150W LED Street light luminaire (IP65). The following specifications are, System wattage : 150w LED Integral Driver : constant current Input voltage : 230-240V Dimensions : 1405mm (Length) x 745mm (Height) x 420mm (Width ) Power factor : 0.95 Surge Protection : 6KV Material : Mild steel (MS) Diffuser : Clear polycarbonate optical cover Colour Temperature : 5700K Colour : Grey ( Make : K-Lite, Product Ref: 4158 )

Supply and erection of 16 Meter high mast shaft and dual ring frame suitable for fixing 8 Nos of fitting and it is totally hot dip galvanised and suitable for wind velocity as per IS 875 part 3. The mast shafts shall be in three finished sections. It shall also include accessories for high mast including head frame, steel wire rope 6mm dia (7/19 construction) double drum winch, Galvanised Lantern carriage arrangement suitable for luminaires as per lighting design & its control gear boxes and lightning finial.Erection and commissioning of the high mast with the help of suitable equipments.Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates with the followings Design and casting of suitable foundation with M-30 concrete for the high mast considering the safe soil bearing capacity at site as 11 T / sq. mtr. at 2.5 metre depth from the natural ground level. Suitable for fixing 8-nos 300W LED flood Light Liminaire. Supply and fixing of specially designed Flood Light Luminaire with 8 nos. 300W LED flood light fitting and its control gear box. Supply and fixing of twin dome aviation obstruction lights with standard Neon sign lamps. Essential Accessories Supply of high powered, single phase power tool for electrical operation of raising and lowering of lantern carriage with its supporting stand, torque limitor and fixing chain. Supply and installation of earth pipe electrode as per IS 3043 complete with 3mtr long with 40mm dia 'B' class G.I. pipe Including 750mm x 750mm x 3mtr long excavation and construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm x 10mm cast iron / RCC cover with frame and lockable facility. The plate electrode shall be filled with alternate layer of salt and charcoal as required full depth. The Cover shall be heavy duty to suit heavy vehicle movements: (2 per mast is mandatory, 1 for lightning and one for electrical).Supply of control panel housing/feeder pillar suitable timer contractor circuit for Automatic switch ON and switch OFF of the mast at a pre-set time with acessories. ( Make: Philips )

The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates, materials. The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fastners, welding, anchor bolts, nuts etc. The rack shall have suitable cable clamping arrangements etc.' Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements. The rate shall inclusive of necessary Wedge anchors theaded rods,nuts & bolts, making clamp for rcc roof fix / perlin/Truss, cable tray clamps etc, (8 mm threaded rod supports shall be provided at not more than 2 mtr center to center and as per site requirement ) 200 x 50mm n (150 x 50 )Perforated Tray

Supply and installation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp (M-2144)

Supply and Run of 8mm Copper Round Conductor complete as necessary clamps / supports on wall / floor / ground for earth connection

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. ( SD-233)

Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with bitumen paint including accessories wooden plugs, screws, fastener etc., 50mm x 6mm GI Flat

Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with bitumen paint including accessories wooden plugs, screws, fastener etc., 25mm x 6mm GI Flat

Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR 2nos with 8TB Hard Disk Drive, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency,Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony).

Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic)

Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung).

Supply and fixing of outdoor 4 x 6 PVC box with 102mm x 77mm x 102mm with all fixing accessories.

Supply and Laying of CAT 6 armoured cable in 50mm dia HDPE pipe below the ground complete with all necessary accessories etc.. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply and fixing of POE 24 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.

Supply and Fixing of Rack with Accessories -Higher end 4 U Rack with LNS unit and fan extra for the above rack.

Supply and Instalatin for 1KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up.

Supply, Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges.

Supply, Installation,Testing & commisioning of 480 watts P.A Mixer Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 watts RMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of 2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000 /Bosch or its equivalent).

Supply, fixing & Testing of 10" gooseneck with suitable base incorporates separate bush switches for momentary and dynamic microphone with 600ohm impedence and has 2.5mv/pa sensitivity and frequency response ranging from 50-15000hz with multi tone chime model.(Make:-ACM66 Ahuja/bosch/its equivalent)

Supply and run of 2core 1.5 Sqmm Un armoured speaker cable with 25mm PVC pipes concealed wall and ceiling etc. complete.

Supply & Installation of custom built M.S Powder coated wall mounting Audio rack with Lock & key for housing of Amplifier & Player / Recorder confirms to EIA-310, IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth.

Safety Accessories: 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS

First Aid Box complete with all First Aid Medicines

Shock Treatment Chart fixed in glass frame

Hand Gloves 11KV Grade

Danger Board as required by the Electrical Authorities

Please Enable Macros to View BoQ information