Modernization of Rural Link roads falling in MC Patti Assembly Constituency Patti District Tarn Taran under Special Assistance Project Phase-II Year 2025-26 including 5 Years Maintenance1Year Defect LiabilityPeriod plus 4Years Maintenance Group No.7

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: EXECUTIVE ENGINEER CONSTRUCTION DIVISION,

Tender Inviting Authority: EXECUTIVE ENGINEER CONSTRUCTION DIVISION,NO.2, PWD B&R, AMRITSAR.

Name of Work: DNIT for Modernization of Rural Link roads falling in MC Patti, Assembly Constituency Patti, District Tarn Taran under Special Assistance Project Phase-II Year 2025-26 including 5 Years Maintenance (1 Year Defect Liability Period + 4 Years Maintenance) Group No.7 1) Peera Shah Road to Abadi Jora Singh & Shivala Mandir ,2) Nadohar Thatha Road to Inspector Gurcharan Singh , 3) Harike Khalra Road (NH-703-B) to Kirtowal Khurd , 4) Sabhra Dubli Road to Abadi Tarsem Singh (Kirtowal Khurd), 5) Kirtowal Khurd to Abadi Bhella Di , 6), Kirtowal Khurd to Dubli Sabhra Road to Harike Khalra Road via Abadi Gurtej Singh, Surjit Singh Bhullar, Gurvail Virk, Sukhchain Singh 7) Bathe Bhani to Saidpur Pringri Road via Abadi Harjit Singh along Drain & Booh Road, 8) Patti Sirhali Road to Abadi Harwinder Singh, 9) Patti Kot Budha Road to Abadi Nonihal Singh ,10) Dhagana to Abadi Bittu.

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Unit Rate Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Compacting of earth work & preparation of sub grade including loosening and leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering rolling with a road roller and compacting the bed to achieve minimum dry density as given in table 300-2 as per technical clause 305 of MORT&H specification. 1 62570 sqm 6.32 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

2 Providing & laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86 cm high half brick deep including excavation, refilling and disposal of surplus earth upto 50mtr. Complete as per Punjab PWD specifications complete as per CSR 24.16 (add difference of bricks rate) 2 22280 rmt 92.05 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

3 Construction of granular sub-base by providing material as per grading-III (Table 400-I of MORT&H 5th revision), mixing in a mechnical mix plant at OMC, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of MORT&H specifications 3 3626.59 cum 1826.41 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

4 Providing, laying, spreading and compacting stone aggregates of Grading I to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical specifications. 4 2719.99 cum 2061.44 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

5 Providing, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical specifications. 5 2719.99 cum 2061.39 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6 Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications. 6 36265.95 sqm 84.14 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

7 Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications. 7 36265.95 sqm 23.12 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

8 Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications. 8 1521.86 M.T. 3520.12 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

9 Providing and laying of premix sand seal coat premixed in Continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications 9 366.31 M.T. 5874.6 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

10 Providing and making rumble strips 15-20mm high at centre, 250mm wide placed at 1m centre to centre over freshly laid bituminous layer by using close graded premix surfacing material type B at approved locations to control speed and marked with 100mm wide white strips of thermoplastic road marking paint. The close graded premix surfacing material type B shall conform to technical clause 512 and thermoplastic road marking paint shall conform to technical clause 803 of MORT&H specifications 10 854 mtr 108.31 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

11 Dresing of Earth work as per CSR 6.3 (i) 11 25700.5 sqm 1.3 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

12 Construction of Shoulder with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 3003 of MORT&H specifications. 12 1485 cum 376.96 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

13 Construction of 1.5 feet Hume Pipe culvert (24 feet formation width) complete in all respect. 13 37 Each 69664.84 Excess(+) Full Conversion INR

14 Construction of 2.5 feet Span Slab Type culvert (24 feet formation width) complete in all respect. 14 6 Each 165660.83 Excess(+) Full Conversion INR

15 Road Marking with Thermoplastic Compound: Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications CSR 24.57 15 2339.4 sqm 649.66 Excess(+) Full Conversion INR

16 Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens or Glass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The supplier shall provide a 2 years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications. 16 2550 Each 256.75 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

17 Reinforced cement concrete M-15 grade ordinary kilometer stone of standard design for village roads as per IRC 8-1980 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specifications. CSR 24.37 c 17 13 Each 2763 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

18 Reinforced cement concrete M-15 grade boundary pillars of standard design as per IRC 25-1967 fixing in position including painting and printing etc. complete as per technical clause 806 of MORT&H specifications. CSR 24.39 18 118 Each 1371.81 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

19 Reinforced cement concrete M-15 grade village board of standard design fixing in position including painting and printing etc. complete as per PWD specifications. CSR 24.40 19 14 Each 5498.21 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

20 Providing and fixing Cautionary Sign Board (600 x 600 x 600mm) tringular and definition plate 600 x 200mm rectengular as per CSR item no. 24.44 b (i) + 24.49 b 20 102 Each 3964.5 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

21 Place Identification sign board 900 x 600mm rectangular as per IRC 67-2001 with retro reflective high intensity microprismatic grade sheeting fixed over 2mm thick aluminium sheet C.S.R. 24.47 b 21 88 Each 6921.4 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

22 Provision of Videography of Road 22 10 Each 1000 Excess(+) Full Conversion INR

23 Add extra cost of Cutlural Cess @ 1% on Total cost as items mentioned above on 1 to 23 i.e. Rs.39412967.23 23 Percentage 0.01 Excess(+) Full Conversion INR

24 Add Maintenance Cost 24 2 Construction of chamber for 100mm sluices valve item3 10 Nos

24.1 2nd Year Mantenance 25 11.14 km 41382.32 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

24.2 3rd Year Maintenance 26 11.14 km 58135.64 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

24.3 4th Year Maintenance 27 11.14 km 86943.18 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

24.4 5th Year Maintenance 28 11.14 km 108155.75 Excess(+) Full Conversion INR 4 Construction of chamber for 100mm sluice plates item5 10 Nos

25 Add extra cost of Cutlural Cess @ 1% on Total cost as items mentioned above on 24.1 to 24.4 i.e. Rs.3282032.16 Note:- 1) Routine Maintenance for four year's (2nd to 5th year) is a fixed amount, Contractor will Quote his rate (Percentage) below or above only for Part I i.e. Construction Cost of BOQ. 2) Routine maintenance of roads, there is Lump Sum provision for each year of maintenance, the payment should be made for actual work done at site Measured in M.B by concerned Engineer. 29 Percentage 0.01 Excess(+) Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words