Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.3 L
Closing Date
12 Aug 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TSK DIV
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Similar Nature of work: Any kind of signaling works of indoor or outdoor with or without supply of signaling materials
37 conditions · 9 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tendered should submit the following documents/papers along with tender document a.List of personals, plant, tools & Machinery available on hand (own) and proposed to be inducted (own and hired to be given separately) for the subject work. b.List of works completed in last three financial years giving description of work, organization for whom executed, approximate value of contract, date of award and date of completion of work, duly certified by the organization with whom the tenderer had worked. c.List of work on hand indicating description of work, contract value, date of award duly certified by the organization with whom the tenderer had worked. The Railways Administration reserves the right to reject any or all tenders in full or part without assigning and reasons thereof.
(ix)A copy of notarized affidavit on a non-judicial stamp paper stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the affidavit to be submitted by the bidder is enclosed as Annexure-V. Non submission of a copy of notarised affidavit by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document.
Instructions and conditions to Tenderers :
The tenderer is advised to study the tender document in www.ireps.gov.in portal carefully.
These Conditions of tender shall be read in conjunction with General Condition of Contract /2022 subject to modification, additions or supersessions by Special Condition of Contract and Specification if any.
Standard General Condition of Contract and Specification 2022 1.1.2 for material and works of the N.F. Railway can be seen at the office of DRM(S&T)/TSK, N.F. Railway.
JOINT VENTURE will only be permitted in the tender value of Rs.10 (Ten) crore and above.
Contractor has also to submit execution programme within 15 days of issue of Acceptance letter or at the time of signing CA whichever is earlier.
All documents being submitted by the Tenderer(s) alongwith their offer shall have to be self attested/digitally sign by the Tenderer.
Contractors are allowed to make payments against this tender towards tender document cost and Bid Security only through online payment modes available on IREPS portal like net banking, debit card, credit card etc. Manual payments through Demand draft, Banker's cheque, Deposit receipts, FDR etc. are not allowed.
The Bid Security deposited by the Contractor with his tender will be retained by the Railways as part of security for the due and faithful fulfillment of the contract by the Contractor. The Security Deposit shall be 5% of the contract value. Security Deposit may be deposited by the Contractor before release of first on account bill in cash or Term Deposit Receipt issued from Scheduled Bank, or may be recovered at the rate of 6% of the bill amount till the full Security Deposit is recovered. Provided also that in case of defaulting Contractor, the Railway may retain any amount due for payment to the Contractor on the pending "on account bills" so that the amounts so retained (including amount guaranteed through Performance Guarantee) may not exceed 10% of the total value of the contract.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- C and shall be valid for a period of 90 days beyond the bid validity period.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured:
i. A scanned copy of the Bank Guarantee shall be uploaded on e- Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids. iii. Non submission of scanned copy of Bank Guarantee with the bid on etendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered 4.3.1 during bid submission time, failing which the bid will be rejected vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to the officer and address as mentioned in the tender document. viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
Every tenderer shall state in the tender his postal address fully and clearly. Any communication sent in time to the tenderer by post at the said address shall be deemed to have reached the tender duly and in time. Important documents shall be sent by Registered post.
The tenderer shall deposit their Bid Security with the Tender for the due performance with the stipulation to keep the offer open till such date as specified in the Tender under the condition of Tender The Bid Security shall be in the name of FA and CAO/MLG/N.F. Railway as indicated in the Tender notice.
The Bid Security of other Tenderers shall, save as herein before provided, be returned to them, but the Railway shall not be responsible for any loss or depreciation to the Bid Security that may happen thereto while in their possession, nor be liable to pay interest thereon.
The successful bidder shall have to submit a Performance Guarantee (PG) within 21 (Twenty one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22nd day after the date of issue of LOA. Further, if the 60th day happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day. In all other cases, if the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated. In case contract is terminated railway shall be entitled to forfeit Bid Security and other dues payable against that contract. In case a tenderer has not submitted Bid Security on the strength of their registration as a Startup recognized by Department of Industrial Policy and Promotion (DIPP) under Ministry of Commerce and Industry, DIPP shall be informed to this effect. The failed Contractor shall be debarred from participating in re-tender for that work.
The Successful bidder shall submit the performance Guarantee (PG) in any of the following forms amounting to 5% of the original contract value. i.A deposit of Cash. ii.Irrevocable Bank Guarantee: iii.Government Securities including State Loan Bonds of 5% below the market value: iv.Pay Orders and Demand Drafts tendered by any Scheduled Commercial Bank of India. v.Guarantee Bonds executed or Deposits Receipts tendered by any Scheduled Commercial Bank of India;: vi.A deposit in the post office Savings Bank: vii.A deposit in the National savings Certificates: viii.Twelve years National Defence Certificates; ix.Ten years Defence Deposits; x.National Defence Bonds and xi.Unit Trust Certificates at 5% below market value or at the face value whichever is less. Also, FDR in favour of FA&CAO (free from any encumbrance) may be accepted. Note: The instruments as listed above will also be acceptable for Guarantees in case of Mobilization Advance.
The performance Guarantee shall be submitted by the successful bidder after the letter of Acceptance (LOA) has been issued, but before signing of the contract agreement. This P.G. shall be initially valid up to the stipulated date of completion plus 60 days beyond that. In case, the time for completion of work gets extended, the contractor shall get the validity of P.G. extended to cover such extended time for completion of work plus 60 days.
The value of PG to be submitted by the Contractor is based on original contract value and shall not change due to subsequent variation(s) in the original contract value.
The Performance Guarantee (PG) shall be released after the physical completion of the work based on the Completion Certificate issued by the competent authority stating that the contractor has completed the work in all respects satisfactorily. The security deposit, however, shall be released only after the expiry of the maintenance period and after passing the final bill based on No Claim Certificate from the contractor.
Whenever the contract is rescinded, the Performance Guarantee already submitted for the contract shall be encashed in addition to forfeiture of Security Deposit available with railway.
The Engineer shall not make a claim under the Performance Guarantee except for amounts to which the President of India is entitled under the contract (not withstanding and/or without prejudice to any other provisions in the contract agreement) in the event of: (i) Failure by the Contractor to extend the validity of the Performance Guarantee as described herein above, in which event the Engineer may claim the full amount of the Performance Guarantee. (ii) Failure by the Contractor to pay President of India any amount due, either as agreed by the Contractor or determined under any of the Clauses/Conditions of the Agreement, within 30 days of the service of notice to this effect by Engineer. (iii) The Contract being determined or rescinded under clause 62 of these conditions.
Restrictions on the Employment of Retired Signal & Telecommunication Engineers of Railway Services within One Year of Their Retirement :
The Contractor shall not, if he is a retired Government Engineer of Gazetted rank, himself engage in or employ or associate a retired Government Engineer of Gazetted rank, who has not completed one (01) year from the date of retirement, in connection with this contract in any manner whatsoever without obtaining prior permission of the President and if the Contractor is found to have contravened this provision it will constitute a breach of contract and administration will be entitled to terminate the contract and forfeit Bid Security, Performance Guarantee (PG) and Security Deposit (SD) of that Contract.
S&T works in connection with the curve alignment work in between NLP-MZS section
N-2026-27-TSK-T-03
N-2026-27-TSK-T-03
Open
Works - General
365 Days
Tinsukia, Assam
₹0
₹2.3 L
12 Aug 2026
20 Jul 2026
29 Jul 2026
95 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 52,85,331.34 | ||
| — | 9.00 | — | — | ||
| Supply of PLB (HDPE) pipe of size 40/33 mm (nominal)along with Socket, as per TS Inspection: RITES | — | — | — | 5,18,552.73 | |
| — | 30.00 | — | — | ||
| Supply of Thermoshrink Jointing Kit for 6-Quad jelly filled cable as per Specification No.IRS:TC-77-2012 with latest ammendments as per technical specification Inspection-RDSO | — | — | — | 82,967.4 | |
| — | 1000.00 | — | — | ||
| Disconnect Terminal block for Four conductor with screwless Cage Clamp type/sliding switch disconnect as per RDSO Specification No. RDSO/SPN/189/2004 version 1.2, for each conductor size upto 2.5 sq. mm. Equivalent of M6 Terminals. Each Terminal block equipped with two markers on top and bottom, an end plate, 2 end clamps & adequate length rails for fitting terminal blocks.Inspection-RDSO | — | — | — | 2,40,700 | |
| — | 200.00 | — | — | ||
| ARA terminal block 6 Way, PBT, as per IRS:S75/2006, Drg. No.SA-23756. Inspection- RDSO | — | — | — | 75,024 | |
| — | 3.00 | — | — | ||
| Supply of 2 Aspect signal unit in FRP body without lense & transformer as per RDSO specification no. RDSO/SPN/194/2006,Version-1 or latest and drawing No.SA-23003A/M (Adv) or latest, Silver pigment finish on back side of door & inside of signal unit white pigment finish to avoid any extra paint cost. Inspection-RITES | — | — | — | 1,04,595.3 | |
| — | 3.00 | — | — | ||
| Supply of 3 Aspect signal unit in FRP body without lense & transformer as per RDSO specification no. RDSO/SPN/194/2006,Version-1 or latest and drawing No.SA-23002A/M (Adv) or latest, Silver pigment finish on back side of door & inside of signal unit white pigment finish to avoid any extra paint cost. Inspection-RITES | — | — | — | 1,16,086.29 | |
| — | 1.00 | — | — | ||
| Supply of CLS base 140mm dia tube (Drg no. 2011/M, Tubular steel post 3.6 mtr (IRS:S-6/81), ladder assembly complete with background platform & ladder base (Drg.no.SA-23150), Anchor bolt (4nos) with nuts & washers as per RDSO Drg.no.SA-115A/M or latest. Inspection- Consignee | — | — | — | 25,204.27 | |
| — | 3.00 | — | — | ||
| Supply of CLS base 140mm dia tube (Drg no. 2011/M, Tubular steel post 4.6 mtr (IRS:S-6/81), ladder assembly complete with background platform & ladder base (Drg.no.SA-23153), Anchor bolt (4nos) with nuts & washers (Drg.no.SA-115A/M or latest. Inspection-Consignee | — | — | — | 77,642.64 | |
| — | 3.00 | — | — | ||
| Offset bracket for colour light signal with fixing U clamps & nuts etc. (Main Signal) Inspection-Consignee | — | — | — | 8,778.18 | |
| — | 3.00 | — | — | ||
| Supply of Direction type route indicator, 2 way as per IRS: S-66/84, non metalic complete to RDSO Specification RDSOP/SPN/194/2006 Version 1and RDSO Specification RDSOP/SPN/151/1997 for FRP, made of FRP to Drg. No.SA-23402(Adv) Alt-4 or all to latest amendments or specifications, complete with fixing arrangement, brackets, hoods and terminals but without lamps, lamp holders and lenses. Inspection-Consignee | — | — | — | 1,87,726.2 | |
| — | 30.00 | — | — | ||
| Supply of Track lead junction box with mounting stump compete with cover FRP material (RDSO/SPN/151/1997 or latest) and as per technical specification. Inspection-Consignee | — | — | — | 70,521 | |
| — | 50.00 | — | — | ||
| GI wire 8 SWG soft for bonding rails as per technical specification. Inspection- Consignee | — | — | — | 4,641 | |
| — | 500.00 | — | — | ||
| Channel bond pin single groove to suit 9/32 inch hole Inspection-Consignee | — | — | — | 4,125 | |
| — | 20.00 | — | — | ||
| Variable resistance to drg. No. SA-20166 (Adv) or latest. Inspection-Consignee | — | — | — | 6,170.8 | |
| — | 20.00 | — | — | ||
| Supply of Track relay, plug in type QTA2, as per Spec No.: BRS: 938A, IRS:S 23, as applicable Inspection-RDSO | — | — | — | 89,968.8 | |
| — | 20.00 | — | — | ||
| Supply of B type Choke as per RDSO specn No. IRS : S- 65/83(Amnd.3) or latest. Inspection-RDSO | — | — | — | 1,06,309 | |
| — | 48.00 | — | — | ||
| Supply of Low maintenance lead acid stationary secondary cell as per specification no. IRS: S-88/04 Rev.1 or latest ammendment, nominal 2V, each of 80 AH with hard rubber container for use of Railway Signaling and Telecommunication application Inspection- RDSO | — | — | — | 1,51,545.6 | |
| — | 20.00 | — | — | ||
| Track feed battery chargers (capacity 10 Amps) to work on 110V AC input for charging 1/2/3/4 lead acid cell of 80 AH used in track circuit as per Specification IRS: S-89/2013 Rev 1.0 or latest Inspection- RDSO | — | — | — | 1,03,586.2 | |
| — | 6.00 | — | — | ||
| Supply and installation of maintenance free earthing as per RDSO Specification No.RDSO/SPN/197, Version 1.0 or latest. Inspection-RDSO | — | — | — | 2,05,542.48 | |
| — | 100.00 | — | — | ||
| Supply of Power wire specification. Inspection-Consignee | — | — | — | 35,900 | |
| — | — | (copper, | as per | ||
| — | 3.00 | — | — | ||
| Power wire 1x4 sq mm copper multistrand (90 mtr coil) as per technical specification Inspection-Consignee | — | — | — | 12,761.55 | |
| — | 1600.00 | — | — | ||
| Supply of Power specification. Inspection-Consignee | — | — | — | 2,85,632 | |
| — | — | — | asper | ||
| — | 1600.00 | — | — | ||
| Supply of Power specification. Inspection-Consignee | — | — | — | 2,22,400 | |
| — | — | — | asper | ||
| — | 15.00 | — | — | ||
| Apparatus case large, as per RDSO Drg. No. RDSO/S/11500 with latest amendments. Inspection-Consignee | — | — | — | 4,31,059.2 | |
| — | 55.00 | — | — | ||
| Supply of Earth electrode foroutdoor equipment consisting of2.5 meter G.I. Pipe mediumgrade having internal dia ofabove 38 mm GI pipe shallconsist of spike at one end and alug at the other for connectingthe earth lead wire. Inspection-Consignee | — | — | — | 1,28,280.9 | |
| — | 30.00 | — | — | ||
| — | 2.00 | — | — | ||
| — | 10.00 | — | — | ||
| — | — | — | 3,30,400 | ||
| — | 2.00 | — | — | ||
| Supply of master cable fault locator as per technical specification Inspection- Consignee | — | — | — | 5,94,497.58 | |
| — | — | — | 60,70,698.98 | ||
| — | 15.00 | — | — | ||
| Excavation, ramming, Casting Cement Concrete foundation for Apparatus cases (Full) in the ratio of 1:3:6 Aggregate not exceeding 3 : 8 cm, as per Drg. No. CSTE's Drg. No. and technical specifications using standard size galvanized Anchor bolts | — | — | — | 1,38,970.35 | |
| — | 15.00 | — | — | ||
| Installation of Apparataus cases/Location Boxes on CC foundation on grouted bolts, including filling the space enclosed below the location box with contractor's sand, as per technical specifications. | — | — | — | 50,569.8 | |
| — | 15.00 | — | — | ||
| Supply & fixing of hylam sheet 10 mm thick size 860 mm X 140 mm , of minimum grade P2, on apparatus case/Location boxes for wiring of signalling circuits and cable termination, fixing on suitable size contractor's angle with string rod for supporting cable on back side, | — | — | — | 52,580.85 | |
| — | 4.00 | — | — | ||
| Excavation, ramming, Casting Cement Concrete foundation for Colour Light Main Signal Post in the ratio of 1:3:6 Aggregate not exceeding 3 : 8 cm, as per approved drawing supplied by railway and technical specifications. | — | — | — | 40,659.72 | |
| — | 1.00 | — | — | ||
| Assembling, erection, installation, taking of cable inside unit through post, termination and wiring of CLS complete with all accessories of CLS unit, post, base,ladder, ladder guards, platform and MS supporting bracket in the middle of the ladder, hoods for 2 Aspect CLS | — | — | — | 8,469.65 | |
| — | 3.00 | — | — | ||
| Assembling, erection, installation of 3-aspect signal complete. This icludes taking of cable inside unit through post, termination and wiring of CLS complete with all accessories of CLS unit, post, base, ladder, ladder guards, platform and MS supporting bracket in the middle of the ladder, hoods as per Technical specification. | — | — | — | 27,719.67 | |
| — | 16.00 | — | — | ||
| Installation and commissioning of DC track circuits including drilling of bond holes, supply and fixing of continuity GI wire bonds on rail joints after drilling bond-hole of 7.0/7.2mm dia. wherever required, bond clips, channel pin & making rail connections of lead wires, installation & fixing of track lead junction box on MS angle grouted on concrete and cable taken through DWC Pipe for track feed end, track relay end and BX Jumpers, connections to tail cable, termination of tail cables on TLJB terminals etc., insertion of insulated block joints and also fixing jumper cables as per insulation diagram/track bonding plan, charging & adjustment of track circuit, all activities as per standard practice | — | — | — | 2,03,992.48 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderdoccurve.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .