Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-AOC AT PO URIMARI DISTT HAZARIBAGH JHARKHAND PIN 825311 | URIMARI | HAZARIBAGH | JHARKHAND | 825311 | ₹16.2 L | L1 | Accepted-AOC Being the 1st lowest bidder. |
| 2 | Rejected-Technical | - | - | Rejected-Technical not accepted for further evaluation |
| 3 | Rejected-Technical | - | - | Rejected-Technical not accepted for further evaluation |
| 4 | Rejected-Technical BHARECH NAGAR SANDI NEAR MIDAS TYRE RAMGARH 829117 JHARKHAND INDIA | RAMGARH | RAMGARH | JHARKHAND | 829117 | - | - | Rejected-Technical not accepted for further evaluation |
| Sl No | Description | Qty | Unit | indra deep nayak L1 |
|---|---|---|---|---|
| 1.00 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 metre and upto 12.00 metre | 54 | each | 7,200 ₹3.9 L |
| 2.00 | Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter and above including binding etc. as required | 1,931.75 | kg | 165 ₹3.2 L |
| 3.00 | Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. | 24 | set | 4,350 ₹1.0 L |
| 4.00 | Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required | 24 | each | 1,010 ₹24,240 |
| 5.00 | Supplying and erection of a set of cross bracing FRLSame work for 11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height , complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required. | 22 | set | 6,800 ₹1.5 L |
| 6.00 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required. | 25 | each | 650 ₹16,250 |
| 7.00 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. | 25 | each | 2,250 ₹56,250 |
| 8.00 | Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33
KV as required. | 50 | set | 550 ₹27,500 |
| 9.00 | Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor
plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11
KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation
including excavation and refilling etc. as required. | 30 | set | 4,900 ₹1.5 L |
| 10.00 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and
complete with galvanised strain clamps, bolts, nuts, washers etc. as required. | 69 | set | 1,030 ₹71,070 |
Tender Value
₹17.5 L
EMD Value
₹21,900
Closing Date
3 Apr 2026, 3:00 pmClosed
P.E. (EnM)
Office of the Project Officer, Birsa Project, Barka-Sayal Area PIN - 825311
erection of 6.6 kV Overhead Power Supply for Dewatering Pumps at Birsa Project under Barka Sayal Area.
2026_CCL_357369_1
PE(EnM)/BIRSA/ETENDER/25-26/36
Open Tender
Electrical and Maintenance Works
20 days
Birsa Project
Please refer Tender documents.
2 documents required · 2 mandatory
₹21,900
9 May 2026
23 Mar 2026
4 Apr 2026
24 Mar 2026
3 Apr 2026
24 Mar 2026
24 Mar 2026 - 27 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 metre and upto 12.00 metre | |||||
| 2Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter and above including binding etc. as required | |||||
| 3Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. | |||||
| 4Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required | |||||
| 5Supplying and erection of a set of cross bracing FRLSame work for 11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height , complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required. | |||||
| 6Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required. | |||||
| 7Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. | |||||
| 8Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required. | |||||
| 9Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required. | |||||
| 10Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. | |||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.49 MB
BOQ_370235.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid