BIRED/33/e-NIQ(1st call) of 2025-2026

Head - I : Internal Electrical Installation Supplying and fixing 415V,100A Changeover switch with Sheet Steel enclosure on flat iron frame on wall with nuts bolts etc [PWD/GS Page:D-1 Item: 2/(a)

Supplying & fixing sheet metal (16 SWG)[500x150mm] Iron Clad Al Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) 415 V, 63 A Al Bus Bar (4 x 20x5mm) [PWD/GS Page: D-12 Item: 19/b ]

Supplying and fixing 415V, 63A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make- LK / Havells)

Supply and Fixing 4 way double door horizontal TPN MCB distribution board with IP-42/43 protection, including 63A, 4 Pole MCB isolator as incomer, 12 Nos 10-32A SP MCB as outgoing concealed in wall after cutting the wall/on angle iron frame on wall and mending the good damages to original finish including inter connection with suitable size of copper wire and neutral link & provision for earthing10 attachment. (Make -Legrand/ABB/L&T /Seimens or as per choice of EIC) [PWD/GS Page: D-10 Item: 14, D-5 Item: 6, D-6 Item: 7] [

S&F 2+16 way double-door SPN MCB Distribution Board with IP-42/43 protection, with 240 V 40 A DP MCB isolator as incomer and 16 nos. 6-32A SPMCB as outgoing, concealed in wall after cutting the wall/on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.as per GS (Make -Legrand/Havells/ ABB/L&T /Seimens) [PWD/GS Page: D-9 Item: 13, Page: D-5 Item: 6 & 7] [SPN for EI/Power Plug =33]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand Polycab/ Finolex/RR/ Havells) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand Anchor Roma/ Legrand Mylink/ Crabtree) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. Average run 6 mtr [PWD/GS Page: E - 24 Item: 1/(b) ]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Polycab/ Finolex/RR/ Havells) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand Anchor Roma/ Legrand Mylink/ Crabtree) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finis On board [PWD/GS Page: E-20 Item: 3 ]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Polycab/ Finolex/RR/ Havells) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 4x 16 sq mm + 2X 10 sqmm [Busber to 63A mp SFU to HTPNDB ] [PWD/GS Page: E-9 Item: g1 ]

Do…............Do…............2 x 6 sq mm + 1X 4 sqmm HTPNDB to SPNDB ]

Do…............Do…............2 x 6 sq mm + 1X 4 sqmm [For Pump ]