Supply of KGBV Furniture and Other Materials

Overall dimension 1200mm 850 mm 900 mm 750 mm Desk 1200 mm 378mm 740mm to750 mm Bench 1200 mm 335mm 437mm The height Depth of the backrest should be 265 mm The desk seat and backrest should be made of 18 mm thick pre laminated MDF board ISI marked with laminated pasted on top and edges with machine pressed PVC edge banding sealed with hot melt EVA glue The understructure should be made of 25 point 4mm 25point 4mm 1 point 2mm thick 60 to70 micron epoxy powder coated MS tubes Storage shelf should be made of 0 piont 6 mm thick powder coated MS affixed below the desktop The front side covered with modesty panel made of 1 mm thick CRCA MS steel of size 1200mm 150H mm and edges sealed with PVC bands with provision of two metal hooks for hanging school bags fixed at ends

The bed shall be of size 1830mm 1905 mm Length 835 to 900 mm Breadth 380 to 450 mm Height Materials to be used on 33 point 7 mm OD 1 point 6 mm thickness Round� MS Pipe� and leg support 25 mm 1 point 2 thickness Round�MS pipe Bed material 25mm 50 mm 1 point 6 mm thickness Rectangle MS Pipe and 20mm 20 mm 1 point 6 mm thickness Square MS pipes Under plywood Support Plywood of 12 mm thickness The total height of bed at leg side shall be 480 mm and head side shall be 675 mm The sides shall be made from square tube 33 point 7 mm OD 1 point6 mm thick The bed shall be supported by 03 nos square tube 19 mm 1 point 25 mm thick under plywood Support All steel structural components shall be processed and made from ISI Marks as per IS 7138 1973 All metal structure shall be welded by MIG CO2 Electric welding The bed can hold minimum 200 kg weight The metallic portion of bed to be powder coated with 45 to 50 micron thickness

Plastic dining table made up of Polypropylene with detachable legs and support at two sides of the bottom Table size minimum length 112 cm width 70 cm Height 71 cm minimum weight of the table should be 5 point 50 kg

Plastic moulded chair without arm made from polypropelene standard size The weight of the chair should not be less than 3 point 70 kg stability and strength conforming to IS 5416

Size minimum Height 1675 mm width 840 mm Depth 305 mm made of Mild Steel Sheet not less than 1 mm thick the shelves shall have lipped flanges 30 mm in width and 15 mm in depth with sliding glass shutter frame made from Mild Steel sheet not less than 1 point 25 mm thick and the width of border frame shall not more than 65 mm Each shutter shall swivel along its axis when open and shall slide in suitable guides at top for keeping the compartment open Four plain transparent glass sheets not less than 3 mm thick shall be fitted in each book case with shutter frame The book case shall be as per IS7761 1983 and should be fitted with all accessories locks handle etc

Trunk made of Galvanized Plain Sheet of 24 gauge trunk of size minimum 25inch L 16 inch B 12 inch H with provision for locking and handle on both sides alongwith one 7 lever lock and key Minimum Weight of each trunk should be 6 kg excluding Lock and Key

Black Board made of 8 mm board both side black smooth polish with two layers of black board paint board covered with aluminum frame in four sides of thickness 20 mm corner of board with plastic corner Two nos of hook for hanging Board size 3 ft by 4ft

Containing 5 Kg cotton with cover made of 100 percent cotton dully stitched size maximum 6ft by 3ft considerable 5percent after stitch

Pillow filled with 1 Kg cotton anti allergic and cloth of the case should be made of cotton duly stitch size minimum 600mm 400 mm The pillow cover shall be manufactured from pre shrunk cotton to a finished size of minimum 700mm 450 mm and shall feature a flap 150 mm wide to fold into the pillow cover

Manufactured from pre shrunk cotton to a finished size of approx 2500mm 1800 mm size minimum 7ft by 4ft