Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.5 LAccepted-AOC WZ143 A 7 A S 4 43 GALI NO 2 OLD MAHABIR NAGAR NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹36.1 L+₹5.9 L (19.4%)Rejected-Finance WZ 250 B 2 GALI NO 08 SADH NAGAR I PALAM COLONY NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹40.4 L+₹10.2 L (33.7%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹43.5 L+₹13.3 L (44.1%)Rejected-Finance 1ST FLOOR H NO 165 GALI NO 16 S B S COLONY KARAWAL NAGAR DELHI EAST DELHI DELHI 110094 | NORTH EAST DELHI | DELHI | 110094 | L4 | Rejected-Finance Not Being Lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cantt-10
GE (Central) Delhi Cantt-10
REPAIR/ MAINT ALONGWITH INTERNAL/ EXTERNAL PERIODICAL SERVICES TO INCLUDE WELCOME MAINT AND MISC B/R WORKS AT SIGNAL ENCLAVE NEW APS COLONY OLD APS COLONY MD ACCN OF ARJAN VIHAR BLOCK NO 01 TO 20 AND OTHER ADJOINING AREAS OF AGE B/R-II UNDER GE (CENT
2022_MES_534095_1
GE/C-36/2022-23
Open Tender
Civil Works
Item Rate
240 days
GE (Central) Delhi Cantt-10
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cantt-10
₹1 L
Yes
13 Aug 2022
28 Jun 2022
29 Jul 2022
28 Jun 2022
27 Jul 2022
12 Jul 2022
28 Jun 2022 - 12 Jul 2022
Amount
M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters etc by washing, rubbing down existing treatment and applying two coats of white lime washing, complete all as specified.
M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters etc by washing, rubbing down existing treatment and applying one coats of white lime washing, complete all as specified.
M&L for Preparation of old decorated surface(Plastered or unplastered) of ceiling by washing, rubbing down and stopping of old surface and applying one coat of white wash complete all as specified and directed.
M&L for Preparation of old decorated surface(Plastered or unplastered) of ceiling by washing, rubbing down and stopping of old surface and applying one OBD complete all as specified and directed.
M&L for Preparation of old painted surfaces of wood based surfaces of any description over 10 cms width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed
M&L for Preparation of old painted surfaces of steel of any description over 10 cms width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed.
M&L for complete removal of existing treatment from internal surfaces of wall by mechanised sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal including two coats of OBD on wall surface using roller brush complete all as spd and directed .
M&L for applying of wall care putty on newly/old plastered walls of 1-2 mm thick including preparing the surface with even and smooth complete all as specified and directed.
M&L for ponting to masonary , brick in cm (1:4) including racking out joints complete all as specified.and directed.
M&L Complete removal exising old surfaces of wall / ceiling by scrubbing with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying one coats of weather proofing exterior acrylic emulsion paint from manufacturer complete all as specified and directed.
Taking down cement Plaster of any thickness from brick or stone walls and concrete etc including raking out joints, jacking for key, scrubbing down with water etc including removal of rubbish outside Defence land, complete all as specified
M&L for ready mix plaster of 15mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer instruction.
M&L for touch up of distemper (applying one or more coat )on walls area of distemper not exceeding 4 sqm ,match to existing shade of wall including preparation existing surface complete all as specified .
M&L for touch up of distemper (applying one or more coat ) on walls area of distemper exceeding 4 sqm not exceeding 12 sqm ,match to existing shade of wall including preparation existing surface complete all as specified
M&L for touch up of synthetic emanel paint on wooden surface ,area of paints not exceeding 3 sqm ,match to existing shade of wall including preparation of existing surface complete all as specified
M&L for touch up of apex paint on wall area of apex paint not exceeding 4 sqm ,match to existing shade of wall , preparation existing surface with birla wall putty ,primer etc. complete all as specified
M&L for touch up of apex paint on wall area of apex paint exceeding 4 sqm but not exceeding 15sqm ,match to existing shade of wall preparation existing surface with birla wall putty,primer etc. complete all as specified
Cleaning and removing all scales and dirt etc. of the tank by scrapping with hard plastic/nylon wire brush and washing it with bleaching powder solution and thereafter washing the same with clean water from service water tank and mouth of circulating pipe of capacity of tank upto 1000 litre complete all as specified and directed by Engr-in-Charge.
Dismantling boarding , any description, fixed in any position with screws complete all as specified
S&F PVC 18 mm thick PVC celluca ply one side prelam fixed with solvent cement adhesive and screws as in kitchen cabinet, book shelf, crocery shelf etc complete all as direction of the Engr-in-Charge
S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified.
S&F 75mm size fancy type stainless handle, cast type, polished bright, complete all as specified.
S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.
S&F in 40 mm dia cup board knob fixed with nut screw and washer of mild steel bright finish.complete all as specified and directed
S&F Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished,light shade, area of each tilesnot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 and including dismantling the existing tiles or terrazo floor with screed and removal of malba out complete all as specified and as directed
M&L for joint free coloured non skid ceramic tiles 600x600x 7 to 8 mm as in floors, set and jointed in neat cement slurry or adhesive as per manufactures instruction and pointed in white or coloured cement, laid over and incl cement screed bed 15mm thick in CM 1:6 and including dismantling the existing tiles or terrazo floor with screed and removal of malba out complete all as specified and as directed.
All as per item no.26 here-in-before but on vertical surfaces of wall as in skiting / dado over 10 mm thick rendering in CM 1:4 including dismantling the existing tiles with screed and removal of malba out of MOD Land complete all as specified and directed by Engineer-in-Charge.
All as per item no.26 here-in-before but on vertical surfaces of wall as in skiting / dado over 10 mm thick rendering in CM 1:4 including dismantling the existing tiles with screed and removal of malba out of MOD Land complete all as specified and directed by Engineer-in-Charge.
M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L Glazed ceramic tiles in vertical surface 300 X 600 X 8mm/ 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM 1:4 incl Dismantling floor, hearth or wall tiling including cement mortar bedding all as specified and directed .
S & F in repairs vitreous China coloured European type WC with "P" or "S" trap for 100 mm bore , including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete all as specified .
S & F in repairs vitreous chinaware coloured wash hand basin of size 580mm x 450mm complete including , CP Waste coupling , PVC waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Engr in charge
S&F in repair vitreous china squatting pan of orissa pattern long pan size 510 x 400 mm white with "p"or "S" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) complete all as specified.
S&F in repair plastic water closet seat cover/white closed pattern with flat bottom and cover and mild steel C hinges as per ISI complete all as specified.
S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, fixing with gitties embeded in wall with drilling machine etc complete all as specified.
S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified
S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified
Supply & fix in repair PVC connection pipe of 1/2"x18" size with 2 Nos brass check nuts with washers, complete all as specified.
S&F in repair Health faucet, CP brass with 1.50m long flexible pipe all as specified and as directed
S & F in repair fancy type 150mm size square brass CP shower rose with long arm all as specified.
S&F in repair std of PTMT bib tap fancy type with flange 15mm dia screwed for iron pipe or for brass ferrule complete all as specified.
S&F in repair CP grating 125mm dia, complete all as specified.
S&F in repairs fancy type looking mirror of size 600x450x6mm with 100 mm wide fancy type border fixed with 4 Nos stainless steel clips complete all as specified
S & F in repair Glass Corner Shelf 8mm thick including CP railing radius 250mm complete all as specified and directed.
S&F in repairs Glass shelf assembly 450mm long 150mm wide with cp railing complete all as specified and as directed.
S & F in repairs 15 mm dia Brass CP three-in-one wall mixer for mixing hot & cold with L bend water screwed down for iron pipe and fixed complete all as specified .
S & F in repairs 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified
S&F in repair polythylene of low or high density or PVC, 32mm /40mm dia waste flexible pipe 750mm long.
S&F in repair brass chromium plated toilet paper holder, complete all as specified.
S&F in repair chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified
S&F in repair brass chromium plated soap dish, complete all as specified.
S&F in GI tubing medium grade 15mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc and taking down the old pipe of conceiled or open in any position and make good by the contractor complete all as specified and directed.
Ditto all as per item No.52 above but 20mm dia.
Supply and Fixing in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 1145mm x 510mm x 200mm with bowl size 510mm x 400mm x 200 mm including taking out existing unserviceable drainage board complete all as specified and directed.
Supply and Fixing in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing plate rack, complete all as specified.
S&F Rotational moulded polythylene 1000 Ltr capacity water storage tank tripple layered WHITE (Cylindrical vertical with closed top )composite type or lid should be thread type) hoisted and fixed in position with float valve and tank connection nipple including dismantling of pvc tank complete all as specified and directed by Engineer-in-Charge.
S&F in repairs mild steel mortice lock of size 100mm steel vertical type 4 levers with key in duplicate complete all as specified and directed .
S&F in repair floor door stopper (150mm) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor in repair ,all as specified and directed by the Engineer in charge.
S&F in repair Aluminium Door seal not less than 1.00 mtr long with fine fibres suitable for fixing in doors
S&F in repair CP S/S Bracket for fixing of glass shelf/ corner glass shelf/health faucet as approved by EIC
Taking down aluminium door/ window frame including shutter of any description not exc 2.00 Sqm each and removing from site.
Taking down chowkats or frames not exc. 1.5 sqm each (with shutter without taking off shutter) complete all as specified.
Taking down aluminium door/ window frame including shutter of any descriptiont area exc 1.5 Sqm and n.exc 4 Sqm each.
S&F powder coated aluminum frames for windows/ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified.
S&F anodised aluminum powder coated glazed/gauzed windows and ventilators shutters side hung type window without sash bar aluminum section weighing 0.65 kg per mtr including necessary jointing cleats glazing clips rubber packing anodised aluminum beading screws including fittings such as 1no Hook and eye 150mm long,2 no Alluminium hinges 75mm long,2 no100 mm long tower bolt and one no alluminium handle 100mm long etc in each shutter including AC Opening including glass panes 4.00mm thick and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete. Net area to be measured for payment purpose. as directed by EIC complete all as specified. Note : The window shutters shall be double leaf and double shutter/double shutter and single leaf. The rates quoted by the contractor deemed to be inclusive of entire completion of work.
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section round the opening, all complete as per requirement and directed. (Only weight of grill to be measured for payment).
S&F Powder Coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,5.00mm thick glass panes, anodised aluminium snap beading, screws etc. complete all as specified.
M & L for 18-20 mm thick Black Granite stone work (table rubbed and polished) fixed with neat cement paste as fixing material as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished complete all as specified and as directed by the Engineer-in-Charge. Note- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account.
Dismantling of brick tiles or terracing tiles single layer on roof and removing the rubbish outside complex (MOD land),incl removal of vagitation if any upto G+5 storey bldg complete all as specified.
Demolition of mud in roof, any thickness, including mud plastering and mud phuska under brick tiles at any situation and height, upto G+5 storey bldg complete all as specified.
M&L for 15mm average thick (average) screed bed in cement mortar 1:4 using WPC on roof surfaces & finished even and smooth with using extra cement and applying two coat of building grade bitumen 85/25 @ 1.2 Kg/Sqm in each layer in any position upto G+5 storey bldg complete all as specified.
M&L for 15mm average thick (average) screed bed in cement mortar 1:4 using WPC on roof surfaces & finished even and smooth with using extra cement in any position upto G+5 storey bldg complete all as specified.
M&L for PCC 1:2:4 of 25mm thick (using 20mm aggregate) type B-1 as in levelling course using WPC finished even and smooth without using extra cement upto G+5 storey bldg
M&L for APP based polymeric membrane plain finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints upto G+5 storey bldg
M & L Cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops etc including weathering slightly rounded or chamfered edges, finished even and smooth without using extra cement complete all as specified.
S&F in repair of 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old PVC/CI pipes and necessary cutting through RCC roof and brick work etc upto G+5 Storey Bldg and making good all as specified.
M&L preparation of newly plastered surfaces as of walls/ceiling and applying two coat of external weather proof acrylic emulsion paint over a coat of primer of same manufacture and surface shall be prepared with white cement puttty including scaffolding upto six storey height complete all as specified and directed.
Disconnecting existing tanks ,setting aside (or lowering if required) for repair,cleaning etc and hoisting if required for repair and cleaning etc and hoisting if required reconnecting and refixing in position capacity exc 500 ltr but not exceeding 1000 ltr complete upto G+5 storey bldg
Taking up or down 25 mm dia GI tubing and connections including cleaning for re-fixing or removal to store in any position upto G+5 storey bldg complete all as specified.
Taking up or down 15 mm dia GI tubing and connections including cleaning for re-fixing and refixing in any position complete all as specified.
Taking up or down 20 mm dia GI tubing and connections including cleaning for re-fixing and refixing in any position complete all as specified.
S&F 25 mm dia GI tubing and connections including cleaning for re-fixing and refixing in any position complete all as specified.
S&F in repairs of 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) not otherwise including removal of rubbish outside complex ( MOD land), upto G+5 storey bldg complete all as specified.
M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, upto G+5 storey bldg complete all as specified.
All as per serial item No 85 but except bricks, all as specified upto G+5 storey bldg complete all as specified.
M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, upto G+5 storey bldg complete all as specified.
M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified upto six storey height.
S&F 0.90mm thickness of Decorative laminate type I of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturer incl taking down shutter and refix with removal and scraping of existing painting surface complete all as spd and directed
S&F 15 mm inner dia CPVC tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc as in horizontal or vertical surfaces upto G+5 storey bldg complete, all as specified.
Cleaning and removal of debries such as stones, waste materials etc from surrounding area of building incl Cuting shrubs wild growth trees not exc 30 cm girth and removing complete vegetation growth from walls including taking out roots from roof/brick work and making good the disturbed surface with plaster and PCC 1:2:4 type B0 and disposing the rubbish from site (MOD land) for a block of eleven flats of six storey height, complete all as specified.
M&L for applying two coat of silver Shield BITUMINIOUS paint on app membrane complete all as specified and directed by Engr-in-Charge.
M & L for supreme quality Heat Resistant Terrace Tiles of size 300 x 300 x 9mm thick over and including 15mm thick screed in CM 1:4 upto G+5 storey bldgall as specified and directed.
Demolition of brick work built in cement mortar in any description and position, upto G+5 storey bldg complete all as specified..
Taking down metal rolling shutter manually operated not exc 10 sqm each including refixing in the same position after carrying out the repair inluding welding of any defective parts and oiling and greasing etc to all moving parts tensioning to spring to make proper functioning of the shutter complete all as spd and directed by Engineer-incharge ( replacement of defective parts shall be paid seperately under separate items here-in-before). repaired shutter shall be firmly secured in walls /columns all as directed by Engineer-incharge
All as per item No 96 above but gear operated of size exc 10 sqm but not exc 25sqm each complete all as specified and directed by Engineer-incharge
M &L for replacement of bevel gear with crank handle of rolling shutter complete all as spd and directed by Engineer-in -charge
M & L for replacement of worn out shaft of gear operated type rolling shutter complete all as spd and directed by Engineer -incharge
M & L for replacement of old tension spring with new tension spring of size exc 300mm and not exc 450mm ( size of shutters not exc 10sqm)complete all as spd and directed by Engineer -incharge
All as per item No 100 above but size of tension spring exc 450 but not exc 600mm ( size of shutter exc10sqm but not exc 25sqm) complete all as spdand directed by Engineer-incharge
M & L for replacement of certain laths of size 50x1.25mm thick interlocking laths section complete all as spd and directed by Engineer -in charge
M & L for replacement of 1.60mm thick black sheet steel guide channel of any depth 65/75mm with suitable holes for embedding in cement mortar 1;3 complete all as spd and directed by Engineer-in charge
M & L for replacement of worn gear wheel of standard size complete all as spd and directed by Engineer-in charge
M & L for replacement of anchoring rod of 20 or 25mm dia for rolling shutters not exc 5m height complete all as spd and directed by Engineer-in charge
Taking down hood cover for rolling shutters exc10sqm & not exc 25sqm and refixing in the same position after doing necessary repair i.e. straighting etc.
M&L for ball bearing for rolling shutters complete all as specified and directed
Welding in repairs of old/broken steel windows/door shutter exc 2.50 cm but n. Exc. 5.00 cm in length and thickness of metal exc 6mm but n.exc 9mm complete all as specified.
Refixing shutters of any description exc 1 sqm but n.exc 2 sqm each after easing and repair for adjustments etc in the same opening., complete all as specified.
M&L second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including treating the back of chowkhat with two coat of black japan/bituminiuos paint complete all as specified and directed.
S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face panel, commercial type on both sides. Flush shutters shall have teak wood edging as specified in IS (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed. Note :- Rate quoted are deemed to be inclusive of fixture and fittings mentioned to each door shutter and painting.
S&F 35mm thick 2nd class Hard wood rail & style (factory made) plain, framed, paneled shutter with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed. The size of rail & style as per IS :1003 (Part I), Kiln seasoned & chemicals pressure treated, complete all as specified and directed Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting.
M&L for 35 mm thick 2nd class hard wood glazed and Skelton door shutter, factory made, open rebated and prepared to receive glass/gauge etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitered beads for securing glass/gauge etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat(incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one stopper and one no 300 mm long Aluminum Sliding door boltsand two coats synthetic enamel paint along with one coat of pink primer) complete all as specified and directed. Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with steel wire staples, complete all as specified and directed.
S&F 4.00 mm thick plain sheet glass with wooden beads, PVC beading, aluminium beads, in square n.exc 0.5 Sqm in each pane, complete all as specified.
S&F solid PVC door frame (Factory made) of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, Supply & Fixing in opening, complete all as per specification and as per drawing on Sl page 150 of SSR (Part II)
S&F factory made solid PVC moulded door shutter 28 to 30 mm thick(stile) with 2, 4 or 6 raised pannel design with two mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face in frame with particle board core as per specification and drawing complete.
S&F butt hinges medium weight, cold rolled mild steel and fixed size of hinge 100mm complete all as specified.
S&F 200mm long anodised aluminum barrel tower bolt, extruded section complete all as specified.
S&F 100mm long anodised aluminum barrel tower bolt, extruded section complete all as specified.
S&F aluminum alloy handles extruded fabricated type, anodised of 125 mm size complete all as specified.
S & F MS helical door spring 150 mm in repair complete all as specified.
Schedule of Credit
imran construction company
GAUTAM ELECTRIC WORKS
R. S. Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .