Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-AOC R O JARNAIL COTTAGE BCS NEW SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | ₹4.5 L Quoted ₹4.8 L | L1 | Accepted-AOC offered rate |
| 2 | L2₹2.0 LRejected-Finance HIMACHAL PRADESH HP | MANDI | HIMACHAL PRADESH | 175001 | ₹2.0 L | L2 | Rejected-Finance hair bidders |
| 3 | L3₹7.5 LRejected-Finance R O VILL CHEOG TEH THEOG DISTT SHIMLA | ₹7.5 L | L3 | Rejected-Finance hair bidders |
| 4 | L4₹22.2 LRejected-Finance H NO 26 HB COLONY SHIMLA DISTT SHIMLA 1 | SHIMLA | HIMACHAL PRADESH | 171001 | ₹22.2 L | L4 | Rejected-Finance hair bidders |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | MS JARNAIL STEEL WELDING WORKS L1 | MADHU SHARMA L2 | Munish Jain L4 | SUNEEL CHAUHAN L3 |
|---|---|---|---|---|---|---|---|
| 1.00Providing, laying & commissioning at site in trenches to be beveled ended pipe conforming to IS/ISO:3183-2007 (Latest with up to date ammendments) having minimum wall thickness as specified below & capable of withstanding required test pressure as prescribed in IS/ISO code, in random lengths of 5.5 to 6.5 mtr. The pipe ends shall be levelled suitable for butt welding, including the cost of jointing with butt welding confirming to IS 816-1969 or latest applicable and with uptodate ammendments (leak proof) in three layers at site of work with welded rods of Advani/oeriliken make/ISI marked (welded rods 3mm to 4mm) and all allied accessories whatever required for welding at site, tail pieces,tee bends & other special manufactured from parent pipes as applicable to the particular reach and of approved specification as per site conditions. and cutting of pipes wherever required as per site requirement including carriage in all leads & lifts and as directed by the Engineer-In-Charge. The pipe shall have zinc coating inside & outside confirming to IS-4736-1986 or latest with upto date ammendments & shall be engraved with API L-210 A.The laying shall confirm to BIS 5822-970 or latest with upto date ammendments to the entire satisfaction of Engineer-In-Charge. (Earth work & cost of MS Flanges after 100meter length shall be measured & paid for seperately.) including all leads, lifts and carriage of materials at site and as per direction and to the entire satisfaction of the Engineer-In-Charge. | |||||||
| 1.01 | API pipe L-210 A 300mm dia wall thickness 5.20mm RD 0/35 | 6 | Rmt | 8,550 ₹51,300 | 9,000 ₹54,000 | 9,120 ₹54,720 | 20,000 ₹1.2 L |
| 1.02 | API pipe L-210 A 300mm dia wall thickness 5.20mm RD 0/100 | 8 | Rmt | 8,550 ₹68,400 | 9,000 ₹72,000 | 9,060 ₹72,480 | 5,000 ₹40,000 |
| 1.03 | API pipe L-210 A 300mm dia wall thickness 5.20mm RD 0/160 | 8 | Rmt | 8,550 ₹68,400 | 9,000 ₹72,000 | 9,070 ₹72,560 | 5,000 ₹40,000 |
| 1.04 | API pipe L-210 A 150mm dia wall thickness 5.20mm | 20 | Rmt | 4,228 ₹84,560 | 4,000 ₹80,000 | 4,300 ₹86,000 | 10,000 ₹2 L |
| 2.00 | Manufacturing & Fixing API bend of required degree as per site requirment made out of parent pipe API pipe 300mm dia i/c cutting welding of API pipe . | 2 | Each | 5,940 ₹11,880 | 6,000 ₹12,000 | 6,150 ₹12,300 | 3,000 ₹6,000 |
| 3.00 | Manufacturing & Fixing API bend of required degree as per site requirment made out of parent pipe API pipe 150mm dia i/c cutting welding of API pipe . | 2 | Each | 3,105 ₹6,210 | 3,000 ₹6,000 | 3,250 ₹6,500 | 5,000 ₹10,000 |
| 4.00 | Welding of pipe joints of MS pipe of rising main 300 mm dia with L&T make electrode complete in all respect as per the direction of the Engineer-in-charge. | 2,441.69 | CM | 7.2 ₹17,580.17 | 7.5 ₹18,312.68 | 710 ₹17.3 L | 100 ₹2.4 L |
| 5.00 | Providing and laying cement concrete work 1:2:4 (1cement : 2sand:4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work in :-In CC Block | 10.8 | Cum | 10,555 ₹1.1 L | 12,000 ₹1.3 L | 11,600 ₹1.3 L | 300 ₹3,240 |
| 6.00Providing Form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring , shuttering, strutting & propping etc. with wooden battens & ballies, height of propping & centring below supporting floor to ceiling not exceeding 4 mtrs.& removal of the same for insitu reinforced concrete & plain concrete work in. | |||||||
Tender Value
₹4.7 L
EMD Value
₹9,490
Closing Date
20 Mar 2026, 11:00 amClosed
AGM Bulk WSD SJPNL Us Club Shimla 171001
AGM Bulk WSD SJPNL Us Club Shimla 171001
LWSS for Shimla City from LWSS Churet pumping station SH Repair of Rising main leakage 300 mm dia replacement of pipe with Bend at RD 0 35 mtr RD 0 100 mtr and RD 0 160 mtr
2026_SJPNL_131039_1
2038-2046 dated 10/03/2026
Open Tender
Civil Works
90 days
Shimla
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹9,490
16 May 2026
10 Mar 2026
20 Mar 2026
10 Mar 2026
20 Mar 2026
10 Mar 2026
10 Mar 2026 - 20 Mar 2026
Manufacturing & Fixing API bend of required degree as per site requirment made out of parent pipe API pipe 300mm dia i/c cutting welding of API pipe .
Manufacturing & Fixing API bend of required degree as per site requirment made out of parent pipe API pipe 150mm dia i/c cutting welding of API pipe .
Welding of pipe joints of MS pipe of rising main 300 mm dia with L&T make electrode complete in all respect as per the direction of the Engineer-in-charge.
Providing and laying cement concrete work 1:2:4 (1cement : 2sand:4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work in :-In CC Block
Providing Form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring , shuttering, strutting & propping etc. with wooden battens & ballies, height of propping & centring below supporting floor to ceiling not exceeding 4 mtrs.& removal of the same for insitu reinforced concrete & plain concrete work in.
Vertical surfaces such as walls (any thickness) partitions & the like I/c attached pillasters, buttresses plinth and string courses and the like :
Hire charge for Diesel Generator set for cutting/welding of pipe complete in all respect as per the direction of the Engineer-in-charge.
Hire charge for pickup vehical for Diesel Generator set complete in all respect as per the direction of the Engineer-in-charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.40 MB
From6.pdf
Tender Documents • 4.70 MB
Undertaking.pdf
Tender Documents • 0.04 MB
From8.pdf
Tender Documents • 1.92 MB
Tc.pdf
Tender Documents • 0.34 MB
NIT.pdf
Tender Documents • 0.39 MB
BOQ_193748.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid