Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.0 Cr
EMD Value
₹8.0 L
Closing Date
9 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Upgradation of power supply infrastructure of Substaion-6 for ECS-III at HAL Lucknow
8835
HAL-ADL/9995/24-25/CAP/ECSIII/190
Works
Accessories Complex - Lucknow Divn - Plant Maintenance
₹0
₹8.0 L
9 Sept 2024
26 Jul 2024
26 Jul 2024
9 Sept 2024
HINDUSTAN AERONAUTICS LIMITED ACCESSORIES DIVISION, LUCKNOW PQ FORM/ELIGIBILITY CRITERION-MATRIX
NAME OF THE WORK: "Upgradation of power supply infrastructure of Substaion-6 for ECS-III at HAL Lucknow"
Estimated Cost (in Rs.) 39,765,252.35
S# Intending bidders must meet the following eligibility criterion: Bidder Remarks
1 Name of the Individual / Firm / Company: * Mandatory
2 Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
4 Address of Correspondence
5 Contact Details: Contact person name: Designation: Mobile No:. Ph. No. with STD code: Email Id :
6 Contractor must give his acceptance to provide services as per ‘Requirement, Scope of work, Drawings’ and ‘Terms & Conditions' contained in Technical Bid.
7 Self attested copy of PAN/GIR No. Registration certificate issued by income tax authority.
8 Self attested Copy of GST Registration Certificate.
9* Average annual turnover during the last 3 years, ending 31st March of previous financial year, should be at least 30% of the approximate estimated amount put to tender. Profit & loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective financial Year i.e. Fin Year 2020-21,2021-22 & 2022-23 11,929,576.00
10* Valid “A” class Electrical contractor licence of appropriate voltage issued by any state Govt. Under clause 45 of Indian Electricity Rules 1956 or as amended from time to time.
11* The Solvency required will be 40% of the approx. estimated amount put to tender. The solvency certificate shall be from a nationalized or scheduled bank and issued within a period of 12 months from the final date of Submission of tender.(in Rs.) Note: Solvency should be either addressed to HAL Lucknow or general one. 15,906,101.00
12* EMD amount (in Rs.) 795,306.00
13* Self attested Copy of PF Code Certificate(if applicable).
14* Self attested Copy of ESI Number certificate (if applicable).
15* Bid Capacity: List A and B to be prepared by Bidder and attached separately. List A: list of value of works completed in last five years i.e from April'19 onwards to Mar'24 duly certified by Chartered Accountant. List B: Details of existing commitments and ongoing works to be completed by Dec'24.
i. Bidder has to provide the list of value of works completed in last five years i.e from April'19 onwards to Mar'24. (List A) ii.Details of existing commitments and ongoing works to completed by Dec'24. (List B) Bid capacity of the bidder shal be calculated using formula 2xAxN-B, where N is number of years for completion of subject project/contract. Bidder shal only be qualified only if their available bid capacity is more than the estimated project cost.
16* Experience of having successfully completed similar works as indicated in the work details during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following (in Rs.):-
i Three similar completed each work costing not less than 40% of estimated amount. OR 15,906,101.00 PO no.: Value : Completion Date: Customer:
15,906,101.00 PO no.: Value : Completion Date: Customer:
15,906,101.00 PO no.: Value : Completion Date: Customer:
ii Two similar completed work costing not less than the amount equal to 50% of the estimated cost. OR 19,882,627.00 PO no.: Value : Completion Date: Customer:
19,882,627.00 PO no.: Value : Completion Date: Customer:
iii One similar completed work costing not less than the amount equal to 80% of the estimated cost. 31,812,202.00 PO no.: Value : Completion Date: Customer:
17 Income tax returns for last three years
18 Annual turnover for the last five years
19 Plant & Machinery details for the work
20 Proposed work completion schedule in the form of bar-Chart
21 Details of Work in hand with value
22 Bank balance Statement for last three months
23 Overdraft facilities available with the agencies
24 Balance Sheet for last five years
25 DECLARATION I ACCEPTED/NOT ACCEPTED
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
26 DECLARATION II ACCEPTED/NOT ACCEPTED
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. 5.I/We are not debarred / blacklisted from any Govt agencies, if debars for specified period reason for debar and copy of resumption of same shall be provided. 6. I/We have not concealed any information which may adversely effect my qualification.
27 DECLARATION III COMPLIED/NOT COMPLIED
I/We declare and confirm that all the documents related to NIT mentioned at SI.No.2 and 3 have been attached with the technical bid.
Name of Bidder:
* 1. To be filled by Bidder essentially and carefully. Supporting documents must be attached as proof. Clarifications shall be sought w.r.t. information provided with tender documents. 2. Similar works implied that works related to HT/LT Electrical Works in nature. Mere supply of electrical goods does not mean qulification in the tender. 3. Scanned copy of completed work orders and completion certificate issued by respective clients to be attached. If the completion certificate is form private organization the same shall be uploaded with TDS certificate. 4. The work shall be completed as a whole, Partial value/completion will not be considered. 5. The Bidders are requested to attach scan copies of all the relevant / desired / required proofs/ documents on e-portal, failing which tender shall be summarily rejected without assigning any reason to bidders.
HINDUSTAN AERONAUTICS LIMITED ACCESSORIES DIFIVISION , LUCKNOW PRICE BID
NAME OF THE WORK: "Upgradation of power supply infrastructure of Substaion-6 for ECS-III at HAL Lucknow"
Sl. No. Descripation Qty Unit Supply Installation Amount
1 Supply, Installation, testing & commisioning of 2 MVA, 11/0.433 KV, ONAN, Dyn11 Distribution transformer Indoor type with off circuit tap changer with first fill of oil with required foundation, consumables and testing & commissioning for Substation 6. Lossess as pe Energy Eff Level 2 of IS 1180 latest amendment. (Transformer oil as per shall be Mineral oil as per IS 335) including inspection charges if required. The work includes making of foundation as per OEM and site requirement. Chipping of existing floor may be essential for installation of transformer. No extra cost shall be payable for the work. 2.00 Nos.
2 Supply, Installation, testing & commisioning of 11KV (1 incoming + 7 Outgoings) HT panel with required consumables etc. at Substation 6 including removal of existing HT Panel and its terminations. Removed HT Panels is to be installed at Substation-4 (The work also includes removal of existing Subsation-4 HT panel and its terminations as well) Scope of New HT termination both at Substation 4 and substation 6 scope will be covered at Sl no. 6 below. (with 1 no of VCB with trolley as spare) 1.00 Job
3 LT Panels (Refer General Conditions & Specifications Documents)
i. Replacement of existing LT panel with Supply & installation of LT panel at ECS III (The scope includes removal of existing LT panel and its terminations). Incomer: 3200 Ax1 no. 4P,50 KA, EDO type Microprocessor based with LSING protection ACBx1 No. with extended busbar suitable for termaintion of 10Rx4/3.5Cx400 Sqmm Al Ar. Cable, with 3 row advanced Multifunction meter with RS485 port ( V, A, F, kW, KVA, kVAr, kWh, kVAh, kVArh, PF, Runhr, Onhr, Interrupts, Phase angle, THD, Neutral current, Max Demand (with RTC) K Factor, Individual Harmonics upto 31st) with data log (8 MB) , RYB LED indicator, Class 1.0 4000/5A 5VA CT, Spring return TNC switch with lever type handle and under volatge release. Outgoing with Digital Ammeter: 1600A x 4 No. 4P ACB EDO Type with extended busbar suitable for termaintion of 4Rx4/3.5Cx400 Sqmm Al Ar. Cable. 800A x 3 Nos. 4P ACB EDO Type with extended busbar suitable for termaintion of 2Rx4/3.5Cx400 Sqmm Al Ar. Cable. Removing of existing LT panel and shiting of termination from existing panel to new panel shall be in the scope of contractor. 1.00 No.
ii. Replacement of existing LT panel with Supply & installation of LT panel at ECS III (The scope includes removal of existing LT panel and its terminations). Incomer: 3200 Ax1 no. 4P,50 KA, EDO type Microprocessor based with LSING protection ACBx1 No. with extended busbar suitable for termaintion of 10Rx4/3.5Cx400 Sqmm Al Ar. Cable, with advanced Multifunction meter with RS485 port (• V, A, F, kW, KVA, kVAr, kWh, kVAh, kVArh, PF, Runhr, Onhr, Interupts, Phase angle, THD, Neutral current, Max Demand (with RTC) K Factor, Individual Harmonics upto 31st) with data log (8 MB), RYB LED indicator, Class 1.0 4000/5A 5VA CT, Spring return TNC switch with lever type handle and under volatge release. Outgoings with Digital Ammeter: 1000A x 6 Nos. 4P ACB EDO Type with extended busbar suitable for termaintion of 3Rx4/3.5Cx400 Sqmm Al Ar. Cable. 800A x 2 Nos. 4P ACB EDO Type with extended busbar suitable for termaintion of 2Rx4/3.5Cx400 Sqmm Al Ar. Cable. Removing of existing LT panel and shiting of termination from existing panel to new panel shall be in the scope of contractor. 1.00 No.
iii. Supply, installation, testing & commissioning of Hybrid 400 kVAr Capacitor panel+400 A AHF Make: Neptune/L&T/Schneider 1.00 No
4 Supply & laying of XLPE Cables in cable trays/builtup trench, dressing, clamping, testing and commissioning of the following 1.1KV grade cables Aluminium/Copper XLPE conductor power cable, conforming to IS:7098 (Part-I). Cable to be laid as per industry standard with sand cushioning, protective covering and refilling and as per the direction of Engineer-In-Charge. Please note cable is to be laid underground by digging soft/hard soil 80 cm deep. After making trench cable should be laid and covered with sand after that bricks shall be placed in width wise for protection of cable. Cable tray with cable ties will all necessary angle support to be used while laying on surface/open area or as per site requirement. Make: - Universal/RPG/Finolex/Polycab/Havells/Gloster
i. 3 1/2C x 400Sq.mm Al. Ar. XLPE Insulated 4500.00 Rmtrs
5 LT Termination Supply, installation of termination for 1.1 KV grade cables, using double compession type cable glands, crimping type lugs, bimetallic washers. Make: Comet/Dowells/Connectwell
i. 3 1/2C x 400 Sq.mm Al. Ar. XLPE Insulated 40.00 Sets
6 HT Cabling & Termination Works
i Laying of one number of PVC insulated XLPE power cable of 11 kV grade og 3Cx185 Sqmm Al Cable in ground including excavation, sand cushioing, protective covering and fefilling trenach etc as required. Hume pipe to be used while crossing the road. 200.00 Mtrs Not Applicable
ii Supply & installation of heat shrinkable HT Termination 11kV grade XLPE 3Cx185 Sq mmwith cast resin compound including lugs and other jointing materials Make: 3M/ Raychem 32.00 Sets
i Body Earthing: Supply & installation of UL listed CPRI Tested maintenance free copper bonded earth rod of 3 metre having diameter of 17.2mm with atleast 250 micron copper bonding tested 45 kA peak short-circuit current with clamp made of stainless steel for terminating cable / flat conductor. Earth enhancing mineral compound ( electrical resistivity 0.018 ohm metre ) 25 kg tested for Leaching & TCLP with NABL accredited lab. The systems is conforming to IS 3043, IS / IEC 62305, IEC 61643-5-54, UL 467, the rod has to be tested to for dimension, marking, tensile strength, salt mist, coating thickness,electrical resistivity test before and after corrosion test etc as per IEC 62561-2.Chamber Inspection Pit made up of PP material can bear 60kN load. Set Consist of following BOM (1) Earth rod of 3 mtr length having the dia of 17.2 mm dia (2) Earth enhancing mineral Compound 12.5 Kg bag x 2 nos (3) Universal SS Clamp SSUC 17 Make: JEF/SABO/CAPE/ERICO/OBO (earth pit installation shall be as per OEM standard with exothermic welding wherever required) 10.00 Nos.
ii Neutral Earthing: Supply & making earthing complete with copper plate 60 cm x60 cmx3 mm thick electrode and buried directly in the ground (earth pit not less than 2.25 meters deep below ground level) with top edge not less than 1.5 meters below normal ground level, connected to 20x3 mm copper strip as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected and providing masonory enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with Eco Safe carbon based backfill compound ( Maintenances Free Type ) – 75 Kg As per IS / IEC- 62561-7, IEEE-80 and IS 3043 ;Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber Make: JEF/SABO/CAPE/ERICO/OBO (earth pit installation shall be as per OEM standard with exothermic welding wherever required) 4.00 Nos.
iii. Supply & laying of 50 x 6 mm Cu. Flat (Transformer neutral earthing) 200.00 Rmtrs
iv. Supply & laying of 25 x 6 mm GI Flat ( LT Panels) 110.00 Rmtrs
8 Supply & installing perforated hot dipped GI Cable trays with connectors, bends, tee, cross member, reducer, GI Nuts and bolts, angle iron supports and cable ties as required.
i. 600 mm wide x 50 mm depth x 2 mm thick cable tray 300.00 Rmtrs
9 Pedestal Distribution Panel
Supply, installation, testing & commissioning of IP 65 protected and type tested weatherproof outdoor type cubicle shape with canopy/double door arrangement with suitable locking mechanism to prevent from dirt/water/creature going inside. IP Protection: IP 65 with type tested. Material: 2mm thick, CRCA sheet steel pressed and shaped with frame of 2 mm thick. Busbar: high conductivity high strength aluminium alloy Hindalco make. Painting: Entire sheet metal work will undergo pre treatment as follows Degreasing-watering-Derusting watering. Activation-phosphating-watering-passivation. Power coated with the panel shade RAL 7032 Siemens grey. After pre treatment as described above the sheet metal is sprayed with powder of desired shade. The powder sprayed structure will then be baked in Diesel fired oven at 180-200C(Indirect Heating). Mounting: Floor mounted LT panel of suitable size with front double door lockable arrangement. Panel doors and covers shall be provided with suitable compressible EPDM/rubber gasket for high degree of ingress protection against dust, dirt, moisture, insects etc. degree of protection shall not be less than IP-65 along with danger board and RYB indication LED lamps. The box shall be floor mounted with suitable iron angle frame and concrete base with brick construction as a plinth with suitable fixing clamps and accessories with all required internal connections as per site condition & comprising of following switchgear & accessories complete in all respect: 5.00 Nos.
Incoming: a) 1no.-4P, 400 Amp MCCB TMD release Type, 50KA, with O/L, S/C, E/F Release with spreader terminal of make Schneider/L&T/Siemens make with spreader terminals and extended rotary handle with RYB LED indicator (TC make) b) 1Lot-400Amp phases+250 Amp neutral Al. bus bars with bus bar insulators, heat shrink sleeves etc. complete c) 1no.-3ph. 0-400 Amp, digital VAF make L&T/Conzerv/AE d) 1no.-3ph. 240V(L-N),5A, CL-1 e) 3Nos. -400/5Amp CT of suitable class and VA burden for Amp (Kappa/Procom Make) Outgoing: 8 Way TPN Nos.-63 Amp bus bar mounted fuse base-carrier (06 Nos.) and 2 nos. 100 A per phase, Make: L&T/ Schneider/Siemens with SMC/DMC supports NOTE: The gap between the bottom surface of the box and surface of the plinth should be 600mm approx. and appropriate bus bar length shall be maintained. Incoming and outgoining to be mentioned on the front door to identify the load distribution. Panel should be surrounded by PCC 600mmX75mm from three side and front with 1000mmX75mm of panel. Drawing of the panels with specification should be approved by HAL before supply.
10 Supply of Following electrical items/consumables: - Cable Clip (20 mm) :15 packet - Cable Clip (25 mm) :15 packet - Cable Clip (10 mm) :10 packet - Cable Clip (8 mm) :10 packet - Cable Clip (6 mm) :10 packet - Fastner (8 mm) : 300 Pcs - Fastner (6 mm) : 300 Pcs - Cable Tie (12 In) : 20 Packet - Cable Tie (6 In) : 20 Packet - 6/16A Combined with Box : 100 Nos (Anchor/GM make) - AC Metal Top and Socket: 50 Nos. (L&T/Legrand Make) - Modular Switch 10A & 16 A (40 Nos each of L&T make) - Modular Socket 10A & 16 A (40 Nos each of L&T make) - Modular Plate 3M, 4M, 6M, 8M, 12M & 14M of 30 Set each of Make ROMA - Modular Plate 3M, 4M, 6M, 8M, 12M & 14M of 30 Set each of Make L&T 1.00 Lot Not Applicable
11 Supply of Complete Digital Earth Ground tester using 4 stakes automatic frequency control to minimize the effect of interference with following specifications: - Internal memory storage upto 1500 records accessible via USB port - Earthing resistance 3 and 4 pole with clipon current transformer - 4 Digit (2999)Digit- 7 Segment liquid crystal display with improved visibility - Central rotary switch and function keys - Complying to EN60529 IP 56 for outdoor use Make: Fluke/Megger 1.00 No. Not Applicable
12 Supply of Maintenance Tool kit: - Wire Cutter/Stripper of Stanley make - Allen (mm) Key Set of Stanley make - Screw Driver Set of Stanley make - Plier Set of Stanley make - Ratchet Set of Stanley make - Hammer Dril Machine with Bit size 6, 6.5mm, 7 mm, 8 mm, 10 mm (length of bit 14 " in length), 12 mm (Bosch make) - Crimping tool for sizes 16 Sq mm, 25 Sqmm, 35 Sqmm, 50 Sqmm, 70 Sqmm, 95 Sqmm, 120 Sq mm, 150 Sq mm, 185 Sqmm, 240 Sqmm, 400 Sqmm of Reputed make - Head Lamp (Fluke) - Non contact voltage tester (Fluke Make) - Digital Distance measurement through laser (Bosch/Fluke) - Drill Machine for metal cutting with bits size 6, 6.5mm, 7 mm, 8 mm, 10 mm (length of bit 14 " in length), 12 mm (Bosch make) - Empty Tool kit bag for containing tools - Ring Spanner Set - Simple Spanner Set -Tester - Mica sheet cutting machine 4.00 Sets Not Applicable
13 Supply, installation, testing and commissioning of Online Energy Monitoring System Complete for 33/11 kV Substation complete on package basis at 33/11 kV Substation, Substation 5 and Substation 2. Make: L&T/Secure/Siemens/Schneider authorised systems/instruments shall be used.
i Supply & installation of advanced Multifunction meter LED Meter Cl1 with RS 485 asper following specificaions: - Datalog (8 MB) - Bidirectional (Import-Export) - 128 Samples /cycle - Digital I/O variant - V, A, F, kW, kVA, kWh, kVAh, kVArh, PF, Interuupts, THD, Max Demand, K factor - Individual harmonics upto 31st - Running demand and Max demand at every 15 min interval 30.00 Nos.
ii Supply, installation testing & commissioning of EMS Software 3.00 No
iii RS485 to LAN converter 6.00 Nos.
iv LAN/Ethernet to OFC Converter 6.00 Nos.
v Ethernet Switch 3.00 No
vi Meter installation charges 30.00 Nos.
vii Supply, installation, testing & commissioning of 6F OFC single mode armoured cable along with HDPE pipe Finolex make including excavation work as per requirement 5000.00 Rmtrs
viii Webview (Web browser based monitoring) 1.00 No
ix one year 25000 SMS Package 1.00 Job
x Supply of high end All in One PC as per specifications given below: a) 1 TB HDD/SSD b) 16 GB Ram c) Wire Mouse and keyboard d) Latest MS Office e) Anti-virus f) MSSQL License 2019/2022 g) Windows 10 or above with lifetime validity h)USB Access for EMS License i) Admin rights for EMS Installation j) Color printer (A3/A4) k) Screen Size: 27" l) Processor Intel Core i7 13th Gen 10 cores 12 MB Cache 5.0 GHz m) Branded UPS Make: HP/Dell 2.00 Nos.
The software features are as follows: a) Online data acquisition over ethernet (TCP/IP) b) Multiple screens for viewing such as tabular, trend graphs. c) Trend graphs must have selectable parameters, selectable feeders and configurable X axis time scale to select the period for which the trend information is required. d) All the screens shall have distinct separation of incming power feeders and outgoing load feeders. e) Power, Energy, Power factor
The software shall be web based real time data acquisition and monitoring software oe effective management of electrical system through the ehternet connected power meteres. It shall acquire data , process it and display in ergonomically designed tables, gauges, graphs or mimics as per user requirement.
The software shall be capacble of generating energy bills as per UPPCL norms. The energy consumption also need to be segregated in four tariff zone TOD-1 to 4. All the factors like fixed charges, demand charges etc as pe UPPCL billing system also need to be incorporated in the software and variable field shall be created so that the dynamic tariff rates can be entered/ modified from time o time. The report format shall also be similar o UPPCL electricity bill. A copy of UPPCL bill format can be provided on request.
Web based remote access data over HAL LAN netwrok. The report in desired format to be developed in consultation with HAL shall be available to PC connected over LAN. The parameters, time period desired to be monitoredshall be configurablethrough dropdown menus, from remote access PC. Loading the Power monitoring software in server PC. Eatablishing connectivity wih all instalaed energy meters commissioning of software, demonstration of all software features, demonstrating remote PC connectivity etc.
HAL personnel to be trained in the field of operation and maintenance of complete supplied equipment, saftware features, procedure for installation of software on standard windows PC etc.
Two sets of O&M Manual (Hard copies) in English language in suitable box folders having following details should be supplied: a) Operation and Maintenance manual comprising of description of all software features. b) Wiring diagram c) Procedure for installation of software on new standard PC d) List of IP addresses configured for all energy meters e) Manufacturer's catalogue of max demand energy meter and Multi function energy meter comprising of operation fatures and procedure, specifications etc. f) Soft copy of above O&M Manual in pen drive g) Ghost back up of hard disk of the pC, such that the compete operating system and software can be restoredon a blank hard disk.
Anything else which is required for satisfactory functioning of the system will be in th scope of work without any extra cost. Equipment supplied shall be under warranty for a period of 24 months from the date of commissioning.
14 Supply of Air-circulator wall mounted fans complete Make: Almonard/Crompton/Orient/USHA/Khaitan
i 450 mm Dia 10.00 Nos Not Applicable
ii 600 mm Dia 10.00 Nos Not Applicable
15 Supply of steel body heavy duty Exhaust fans AC single phase 230 V with blades and frame and louvers (desirable) and installation by making suitable holes of following size
600 mm Dia 900 RPM 34.00 Nos. Not Applicable
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 2.93 MB
TECHNICAL_BID.pdf
TENDER_DOCUMENT • 2.08 MB
ELIGIBILITY_CRITERION_MATRIX.xlsm
TENDER_DOCUMENT • 0.01 MB
Price_Bid.xlsm
TENDER_DOCUMENT • 0.02 MB
Corrigendum_Notice_ECSIII.pdf
TENDER_DOCUMENT • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .