SPL REPAIRS TO BLDG NO T31 (EARLY INTERVENTION AND CARE) OF MH NAMKUM AT RANCHI MIL STN

Amount

Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed .

Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm & n.exc. 4 Sqm each complete all as specified and directed .

Taking down of wooden shutter of any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed .

Supply & fix mild steel work as in hold fast etc and similar articles confirming Fe-290 Gde E-165 complete all as specified & directed.

M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified.

M&L Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified.

Supply & fix second class hard wood (Hollock) 35m thick glazed and skeleton factory made shutter for door open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, size members of shutters as specified in SSR Part-I Sec 8, Clause 8.24 (a) complete all as specified and directed .

Supply & fix mild steel 150 mm, Helical door spring including roller and roller plate for door shutters complete all as specified and directed .

Supply & fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed.

Supply & fix Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed .

Supply & fix in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed .

Hacking out old broken glass (any thickness), size quality or description from metal frames or wooden frames incl punching or drilling out glazing pins/springs clips and providing and fixing new ones glazed with putty or fixed with beads complete all as specified and directed .

Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty of make Shalimar Hardware or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane.

Supply & fix 3mm thick sheet glass, frosted type ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane.

Supply & fix mild steel framed work such as grills, grating, Railings etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0.

Supply & fix mild steel butt hinges 100mm size medium weight, cold rolled complete all as specified and directed.

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified and directed.

Supply & fix 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

Supply & fix 250 mm long Aluminium alloy, Sliding door bolts, with hasp, staple and fixing clips of sheet, cast or extruded section and fixing bolts of extruded section or cast aluminium alloy complete all as specified & directed.

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

S & F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhats of size 50 x 100 mm comprising of virgin PVC ploymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixede in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerence in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made solid PVC Moulded door shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing .

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed .

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed .

Cutting chases, pining in brick wall and making good in CM 1:3 for concealed water tubing, cutting n.exc 10 cm.

Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply & fix in repairs pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fix in repairs Fancy type bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fix in reapir 15mm bore Angular Stop valve cast copper alloy fancy type chromium plated, complete all as specified and directed.

Supply & fix in repairs vitreous china squatting pan of pattern orrisa size 580mm x 440mm, white with “P” or “S” trap, including integral foot rests any pattern including connections to trap and flush pipe etc including making good to floor to match the existing complete all as specified & directed.

S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour all as directed and specified.

Supply & fix in vitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified.

Supply & fix in repairs vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed.

Supply & fix in repairs PVC low level flushing cistern of 10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply & fix in repairs chromium plated shower roses with swivel joints of 125mm size complete all as specified & directed.

Supply & fix in repairs PVC connections of 450mm long of PRYAG Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fixing in repairs rotational moulded polyethylene water storage tanks 1000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

S&F in reapir Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia.(ISI Marked)

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.(ISI Marked)

Demolition and breaking of drain pipes of 110/75mm size etc complete all as specified & directed.

Supply and fix PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.(ISI Marked)

Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.(ISI Marked)

Material & labour for 75mm bore PVC floor traps plain fixed in repairs including jointing with solvent cement complete all as specified & directed.

S&F grating doom 100mm dia of PTMT (Minimum weight 25gms).

Supply & fixing MS tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified & directed.

Supply and fix sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromiun plated bracket guard and railing 60 cm long

S & F Plate Rack made out of 0.80 mm thick stainless steel of size size 90cmx75cmx25cm with all internal fittings (as per sample) approved by Engr -in-Charge.

Supply & fix (in repairs) sink with draining board made of stainless steel 1.00mm thick for kitchen with plug, washer and waste pipe including fixing cantilever brackets and connecting union to pipes overall size 915mmx420mm, bowl size 10mmx330mmx 160mm complete all as specified and directed.

S&F in repairs 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

Demolition of cement concrete in ground floors and saving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

Material & labour for 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub base of floor complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed .

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete

Material & labour Non skid coloured Jointfree tiles 7-8 mm thick area of each tile exc 0.11 sqm but not exc 0.18 sqm,on vertical surface such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.

M&L vitrified coloured ceramic tiles 10 mm thick (square or rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc over and including 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match complete.

All as per Item No 105 above but as in Skirting with 10mm thick rendering in CM 1:3

Material & labour for PCC 1:3:6 type C-1 using 20mm graded stone aggregates as in bed block, copings, benching, roof kerbs etc, incl cutting into bricks or stone wall as required for inserting hold fasts complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 as in plinth protection, path etc finished the surface even & fair complete all as specified

M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as directed

M & L for complete removal of existing treatment of walls and applying two or more coats of exterior acrylic emulsion paint (Apex or equivalent in berger. johnson paint white or tinted) over a coat of alkali resistant primer complete as specified and directed.

Material & labour for preparation of Old painted surface of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old wood and wood based surfaces of any description over 10 cm width or girth & applying one coat of synthetic enamel paint of any tint all as specified and directed by Engr-In-Charge.

Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description.

M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material & labour 15mm thick rendering in CM 1:6 on fair fair faces of brick wall or concrete surfaces finished even and fair complete all as specified

M & L preparation of newly plastered surfaces of walls/chajja/lintel and applying two coats of exterior acrylic emulsion paint (Apex or equivalent in berger. johnson paint white or tinted) over a coat of alkali resistant primer complete as specified and directed.

Materials & labour for prepration of newely plastered surfacea nd finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.

Dismantling Wall and ceiling boards of any description and any thickness including cover fillets.

M&L providing aluminum snap Grid frame work for false ceiling with of size 595x595 mm, using main and cross Tee of size 36.5 mm x 25mm x 1.4 mm, weighing 0.24 Kg/RM and 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM respectively. The snap grid shall be supported at end all along the wall with alu anodized angle of size 40 mm x 25 mm x 2 mm weighing 0.36 Kg/RM . the snap grid shall be fixed to ceiling supporting hangers consisting of 2 mm dia MS wire, J bolts, nuts and washers as per manufacturer's instructrions. Note : If any aluminum section found of less weight, the same ahall be worked out by actual weight and recovery @ Rs. 230/- Kg shall be made from contractors dues.

M&L 4mm thick Non asbestos fibre designer cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws .

Material & Labour for 18/19 mm thick prelaminated particle boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

S&F fancy type sofia bracket for the curtain rod (suitable for 20mm dia) of any color as approved and fixed to rackets all as specified and directed.

S&F in reapir MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as approved and fixed to rackets all as spcd and directed..

Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof covering

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0 complete

Dismantling of roof trusses , purlin, rails & fastening etc, of steel section complete.

Taking down roof trusses, coupled rafters or trussed beams Clean span above 4 metres and upto 8 metres.

Dismantling timber scantlings 40 sqcm and over in section, in any position.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats et conforming to I. S 1161-1979 FE-410(Gde E-250, quality A).

M&L 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of pigment

Demolition of brick work built in CM incl all quoins arches, pillars etc including removing the same where directed complete all as specified & directed .

M/L brick work with sub class B bricks built in CM 1:6 straight or curved exceeding 6m mean radius all as specified.

Material & labour for brick work with sub class ‘B’ bricks, straight or curved on plan, exc. 6 metre mean radius built in CM(1:4) as in half brick wall complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for

Use & waste of form work to edges of concrete flats, n.exc. 20 cm wide, horizontal or sloping and similar works, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick (horizontal or slopping).

Material & labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in beams, lintel, lintel band etc complete all as specified and directed.

M&L for RCC as in kitchen platform, shelves, cover slab, Pillars Etc, type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified

M&L RCC Type A1 1:1/2:3 (20mm graded aggregate) nominal mix over slabs supported on walls, beams and columns in floor, roofs, landing, balconies canopies, deck slabs and in shelves and the like

Supply & fix mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fix mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending as in stirups complete all as specified and directed.

Material & labour for pre-cast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cover slabs, set in CM 1:6 including necessary form work and finishing to exposed surfaces complete all as specified and directed.

Material & labour for 20 to 25mm thick machine cut kota stone slab flooring over and including 20 mm thick screed bed of cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slabs including grinding and mirror polishing complete all as specified and directed.

Material & labour for 20 to 25 mm thick machine cut kota stone slab on vertical surfaces over and including 10 mm thick backing plaster in cement mortar (1:4) complete all as specified and directed.

Material & labour for chequered cement concrete tiles 30cmx30cmx20-25mm thick set, jointed and pointed in neat cement slurry in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified & directed.

S&F 110 mm PVC(SWR) vent cowl

Demolition and breaking of SGSW or RCC drain/Soil pipes jointed in cement mortar and taking out from trenches if required internal diameter 150mm.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

M & L PCC 1:3:6 type C2 as Concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in

Supply & fix 150mm dia salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed in CM 1:1 including testing complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

M&L Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.including (powder coating not less than 50 micron) complete all as specified.

S & F Anodised aluminium window and ventilator shutters, side hung type or two or three track type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.if use sliding tack provide all locking arrangement,rubber beading,cleat incl all fitting and fixture complete.

S&F anodised aluminium window/sliding window shutters and ventilator shutters, fixed type for partition without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified. Note :- Glass/wire mesh shall be measured and paid separately.

S&F 4 lever brass mortice lock vertical type size 65mm long complete.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

M&L 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with aluminium frame.

S&F 4mm thick plain sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete.

S&F 4mm thick plain sheet glass, area not exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete.

M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete.

Taking down copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, pendents, regulators, sockets, light fittings, wooden boards, bell push, call bell, regulators etc (credit scheduled for above items should be made as per condition separately) and making good to disturbed wall and surface complete all as specified.

M&L for Point wiring using approved colour coding as per IS ( Red, black and green for single phase circuit ), with 1.5 Sq mm cross sectional area, single core, multi stranded copper conductor (FRLS) PVC insulated and sheathed electrical cable ISI Marked and including medium grade PVC conduit of dia not less than 20 mm and conduit accessories concealed in wall/surface including mild steel/pressed steel sunkun boxes (with earth dolly) dully painted with two coats of black bituminous paint over a coat of red oxide primer externally, covered with modular sheet for fixing of modular switches, socktes etc including PVC insulated multi-stranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr in Charge at site for the following:- Note - (i) Cost of cutting chassing and making good of disturbed surface all to match with existing surface deemed to quoted rates.(ii) Switch ,socket and regulator to be measured and paid separately in respective items.

Light point controlled by one piano type 5 amp switch complete all as specified

One 3 pin socket outlet, 5 Amps independent board complete all as specified & as directed. (Switch, socket shall be measured separately).

One socket outlet 3 pin 5 Amps on the same board controlled by separate switch. (Switch, socket shall be measured separately).

All as per item No .2 here-in-before but with 4.00 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 4 Sq mm size and directed.

M & L for switch Modular switch 1 way 10A,1 module 240 volts complete

M & L for switch Modular switch 1 way 15A,1 module 240 volts complete

M&L for socket outlet Socket, 6A - 2/3 pin combined 2 module 240 volts complete all as specified

M&L for socket outlet Socket, 6/16A - 2/3 pin combined 2 module 240 volts complete all as specified

M&L for Fan step regulator, 120W - 2 module 240 volts complete all as specified

M&L for ceiling rose surface bakelite, 3 terminal complete all as specified & as directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing LED luminaire 600 mm x 600 mm (2'x2'), 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete

Supply and fixing LED lights fitting 1x 20 W (4'), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Dismantling and Taking down sub main wiring including batten /Conduit and making good to distrubed surface complete all as specified.

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated,one run of unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.Note - 02 Nos Run single core for Phase and nuetral and 01 No Run for Earth wire are drown through in PVC rigid conduit medium grade to be measured as 1 Running meter sub main wiring .

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated,one run of unsheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.Note - 02 Nos Run single core for Phase and nuetral and 01 No Run for Earth wire are drown through in PVC rigid conduit medium grade to be measured as 1 Running meter sub main wiring .

Dismantling and Taking down old unserviceable existing cable any type any size complete

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified. Note:- (i) Excavation & earth work, new sand, new bricks for cable protection shall be measured & paid seperatly in respective items here- in- after

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable, foundation etc, and getting out in soft /loose soil all as directed.Note - Excavation/earth work shall be done by manually manner with the safety of Data/OFC/telephone cable. If any cable damaged during the excavation to be repair same time and cost to be included in qouted rates.

Returning filling in including spreading, leveling Watering and well ramming in layers not exceeding 25cm all as directed.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed.

Supply and laying sand river for cushioning with layers of sand 8 cm before lying of cable and 15 cm after lying of cable (total 23 cm) in trenches complete all as specified & directed.(Note: Thickness after punning shall be measured for payment ) all as specified and directed.

Supplying & laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40 mm abetting Each other with gap between adjacent slab not exceeding 10 mm over under cable for protection all as specified and directed.

Dismantling and Taking down old unserviceable main switch/DBs/MCB DBs with MCB including making good the disturbed surface complete.

M&L for sheet metal enclosure MCB DB, SPN, 240 volts, 12 way, double door type grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections complete.

S&F MCB SPN 240 volts, 10 KA, C-Series 32 Amp complete all as specified

S&F MCB SPN 240 volts, 10 KA, C-Series 40 to 63 Amp complete all as specified

S&F MCB SP 240 volts, 10 KA, C-Series 6 to 32 Amps complete all as specified

M & L for VTPN distribution board, 415 volts , 50 Hz, 06 way with 200 Amps rated bus bar, vertical double door type,IP 43 s directed.

S&F MCCB 100 Amp 16 KA three pole 415 Volts, 50 Hz with thermal magnetic release, fixed type complete all as specified & as directed.

Taking down of existing ceiling fan Fan from any height, opening and dismantling for greasing and painting of fans complete with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust writing MES No with black paint etc and hanging of fans at same location including clamp with nut/bolt and rubber bush of any make connecting up including provision of cable from ceiling rose to fan complete all as specified and directed

M&L for providing earthing complete with GI earth plate electrode of size 60 cm X 60 cm X 6 mm thick burried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 25x4 mm GI strip by means of bolts, nuts check nuts and washer of GI or steel all as shown in electrical plate No.5 of SSR Pt-I, connected to earthing main switch board/main board including necessary earthwork PCC 1:3:6 type C-1 chamber, precast RCC cover using XPM weighing not less than 4.00 Kg/Sq m in lieu of CI cover, 20 mm bore GI pipe (light grade) for watering and 32 mm bore GI pipe (light grade) for protection of earth lead etc. complete all as specified and directed.

Supply and install hi wall 1.5 TR Inverter type units having one indoor unit and one outdoor unit comprising of INVERTER rotary compressor, 3 star Split Air Conditioner with Cooling capacity 5.25kW ± 2%,230V/50Hz/Single Phase, Coefficient of performance : 3 (Minimum),Max. Ambient temperature : 480 C ± 5%,Moisture removal rate : 2 ± 10% litre/ hour , Air flow rate : 5.6 cmm (Minimum) Noise level Indoor unit : Less than 45 db,Outdoor unit : Less than 55 db,Function modes : Auto/Cool/Fan/Dry – shall have sleep and power, saving modes, automated vertical swing for horizontal louvers, antifreeze thermostat,Compressor Rotary type,Body surface finish powder coated/high quality paint finish, Air filtering unit activated carbon cartridge, dust proof and anti bacteria filter including tubings upto 5 m or as per the installation requirement, cordless remote handset with LCD display with night glow complete all as specified. Note - (i) The outdoor unit shall be mounted on wall bracket or on a raised platform of suitable length and width at a height of 45 cm from ground as per site condition or as directed by Engineer-In-Charge (ii) The unit shall be supplied along with standard length of refrigerant piping and drain piping in suitable size and refrigerant pipe should be well insulated to avoid condensation.(iii) Only copper material condenser units and cooling unit will be accepted. (iv) All finishing works like packet filling, wall colony work or any other Civil work from inside or outside of building shall be completed in all respects and incl in rates.

Supply, installation, Water cooler fully stainless steel, with inbuilt RO purification system electric driven single phase having storage capacity of tank should be 120 Ltrs with cooling capacity 80 Ltrs and water filteration capacity of pufifier + ultra filter (RO) having two taps with refrigerant 134A complete all as directed. The Specification of RO + UV Purification :- RO + UV filteration shall be Maximum input water TDS allowed to the system 1000 PPM, Operation mode fully automatic with auto cut off,UV Lamp, particulate Filter,Particulate filter Porosity 5 micron, Activated Carbon Filter,Minimum Inlet pressure 0.3 Kg/CM2, High Pressure Pump installed,recovery percentage at 27 degree centigrade with 100%, 6 filtration Stages, purification capacity 50 LPH RO membrane 75 GPD(04 Nos) complete all as directed.

Supply and fixing sub-main wiring with two single core flame retardant PVC insulated and unsheathed cable with stranded copper conductor of 4 Sq mm drawing in & including medium grade PVC concealed conduit pipe 20 mm bore ISI marked with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc and one additional earth wire of 4.0 Sq mm but green in colour for earth DBs and boxes with proper thimbles thimbles connecting up and including taking down old submain wiring complete all as specified and directed.( Note : Two run of wire and one run of earth wire drown in PVC conduit of 20 mm dia shall be measured as one RM).

M&L for Sheet metal enclosure Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp "C" Characteristics with breaking capacity of 10KA complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for working Voltage Range: 130V to 300V or as per OEM Specification with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity upto 5 KVA (Capacity ≥15 Amps) with protection of Stabilizer : Low and High Voltage Cut-off Protection, Built in Thermal Overload, Intelligent time Delay System and Wall Mounting Cabinet Design type complete all as specified and directed.

BUILDCON ENTERPRISES (BID ID -3469658)

india trading company (BID ID -3469800)

M/s Kundu Enterprises (BID ID -3470161)

M/S RANJAN AND DAUGHTERS GROUP (BID ID -3474900)

M/s Sanjeev Singh & Sons (BID ID -3469186)

M K Enterprises (BID ID -3474647)

JAYSHREE ENTERPRISES (BID ID -3469862)

jai maavindwashni sales & supply (BID ID -3469742)