RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled Yes Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Crawler Hydraulic Excavator ( 94 pieces ) Technical Specifications 1/12 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Conforming IS/ISO 7135:2009 Hydraulic Excavator (Crawler) Yes Yes Make - * Model - * Type of the excavator Crawler * Operating mass 22800 More than 20000.0 Or higher Shipping mass 22900 Any applicable numeric value Engine manufacturer and model - * Ignition type Diesel Diesel Type of cycle 4 Stroke 4 Stroke Aspiration mechanically turbocharged * No of cylinders 6 * Bore 105 * Stroke 125 * Displacement (cc) 6494 * Max Engine horsepower 148 Any applicable numeric value Maximum Engine torque (Nm@rpm) 556 Any applicable numeric value Engine cooling system Liquid cooled * Type of fuel Diesel * Starter type - * Electrical system voltage (in volts) 24 * Bucket capacity to handle material of density 1 Any applicable numeric value ISO net flywheel power at given engine speed (hp@rpm) 148 Any applicable numeric value Maximum swing speed 13 Any applicable numeric value Reach at ground level 9510 Any applicable numeric value 2/12 Depth reach 6170 Any applicable numeric value Travel speed 3.4 Any applicable numeric value Gradeability (degree) 35 Any applicable numeric value Force at bucket curl at the Tip 125 Any applicable numeric value Stick crowding force 120 * Ground Pressure 0.49 * Operating weight 22800 Any applicable numeric value Draw bar pull 158 * Standard Boom 5850 Any applicable numeric value Standard Arm 2500 Any applicable numeric value maximum digging depth 6170 Any applicable numeric value maximum digging Reach 9510 Any applicable numeric value Rated Lift Capacity 1.8 Any applicable numeric value fuel tank capacity 280 Any applicable numeric value Certification Vehicle Certification ARAI/VRDE/ICAT No * If No
Requiredmention the name of Vehicle Certification agency - * Vehicle Certification name and date - * Compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR rules Yes * Availibility of test report for the product from Any ILAC/NABl accredited/central government lab to be furnished to buyers on demand Yes * Responsibility of Registration with RTO Yes * 3/12 IS/ISO 6165 : 2006 Earth moving machinery - basic types - Identification and terms and definitions Yes * IS 11114 : 2006 Earth- moving machinery - Definitions of dimensions and codes: Part 2 base machine Yes * IS 11114 : 2006 Earth- moving machinery - Definitions of dimensions and codes: Equipment and attachments Yes * IS13116 : 2006 Earth- moving machinery -Engine Test Code - Net power Yes * Construction Parameters Overall length 10000 * Overall width 2990 * Overall heigth 3060 * Overall transport length 10000 * Width of upper structure 2595 * Track overall length 4251 * Track overall width when retracted 2990 * Track overall width when extended 2990 * Track shoe width 610 * Centre to centre - idler to sprocket 3445 * Upper structure ground clearance 1060 * minimum ground clearance 465 Any applicable numeric value Tail swing radius (standard) 2859 * Tail swing radius (counterweight) 2859 * Backfill Blade height 0 * Backfill blade width 0 * Backfill blade rise 0 * 4/12 above ground Backfill blade dig depth 0 * Maximum Cutting height 8970 * Maximum Loading height 6200 Any applicable numeric value Minimum Loading height 5000 Any applicable numeric value Maximum vertical wall digging depth 4970 * Hydraulic pump system type - * Hydraulic pump flow at given pressure (L/hr) 24300 * Hydraulic pump flow at given speed (L/hr) 24300 * Hydraulic system fluid capacity 275 * Hydraulic system output 405 * Cooling systsem fluid capacity 44 * engine crankcase fluid capacity 25 * pump drive fluid capacity 405 * Swing reduction 187.086 * Swing circle lubrication - * Swing lock - * swing drive fluid capacity 5 * Filteration system - * Fuel filters - * Air Cleaners Yes * Type of Steering Manual * Type of braking system Disc * Type of final drive Planetary * final drive fluid capacity 4.5 * Type of Track - * Track dimensions 4251 * Ground Contact area 2.1 * 5/12 Number of shoes on each side 47 * Number of carrier rollers 4 * Number of track rollers 16 * Cab height 1747 * Crawler track height 919 * Clearance height under upper structure 1060 * Undercarriage overall width 2990 * Shipping height 3060 * Shipping height with guard rail 3060 * Shipping length 10000 * tail swing radius 2859 * Length to centre of rollers 2125.5 * Counterweight clearance 1060 * Right-side upper structure distance from axles of rotation 1298 * cab width overall 940 * Track gauge with track extended 2990 * track gauge with track retracted 2990 * Crawler overall length 4251 * Sprocket axis to axis of rotation (in degress) 90 * Upper structure rearmost distance from axis of rotation 2830 * Maximum dumping height for shovel 6200 * Length of level floor cut 0 * Minimum level floor radius 0 * Muffler with rain cap Yes * Fuel Consumption for Earthwork application 17 * Maximum dig radius 9510 * 6/12 Dig radius at groundline 9510 * Maximum dig depth 6170 Any applicable numeric value Vertical straight wall dig depth 4970 * Dump height 6200 Any applicable numeric value Overall reach height 8970 Any applicable numeric value Bucket rotation 2710 * Arm digging Force 120 * Bucket Digging Force (ISO) 125 Any applicable numeric value Stick Digging Force (ISO) 120 Any applicable numeric value Bucket Digging Force (SAE) 125 * Stick Digging Force (SAE) 120 * Fully enclosed steel cabin with safety pipes window locking service doors and adjustable cushion seal Yes * Service hour meter Yes * Complete Instrumentation Yes * Starter key switch Yes * 2 working light and cabin light Yes * Electric Horn Yes * Parking brakes Yes * Emergency shut off Yes * Cabin/canopy :All round visible cabin
RequiredWith easy Walk Through Access Yes * Instrument Panel Yes * Cabin Instumental panel with audio indicators Yes * Cabin Instumental panel with visual indicators Yes * Seating Plan: Co- No * 7/12 Adjustable driver seat with one helper seat Doors:-Front door with fixed toughened glass & locking mechanism with wiper Yes * Glasses:-Front wind screen
Requiredrear glass in two pieces glass Yes * Paint:Standard automobile paint to the exterior body as per CVMR rules Yes * Rear view large convex mirror Yes * Front screen wiper Yes * Front and rear horn Yes * Number of roller 8 * Lift Path Yes * Cabin Entry and Exit Yes * Operation Control Yes * Length Without Attachment 4955.5 * Performance Parameters ISO net engine power (HP@rpm) 148 * Maximum travel speed (high) (km/hr) 3.4 * Maximum travel speed (low) (km/hr) 3.4 * Braking performance - * Tipping Load (kN) 22.8 Any applicable numeric value Digging Tool used Hoe * maximum force by Shovel/hoe/clamshell using arm cylinder (kN) 492 * maximum force by Shovel/hoe/clamshell using bucket cylinder (kN) 424 * Warranty time 1 * Operating hours during warranty period 2000 Any applicable numeric value Battery warranty 1 * 8/12 No Of Free services 3 * Transportation charge (in Rupess) 334530 * Maintenance cost for first 5000 Hrs (in Rupees) 688000 * Excavator Self propelled machine on crawlers having an upper structure capable of 360 degree swing and with mounted equipment which is primarily designed for excavating with bucket without movement of undercarriage during work cycle Yes * Work cycle normally compromised excavating
Requiredelevating
Requiredswinging and discharging of material Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
