ADDN/ ALTRN OF FTL INTO LED TUBE FITTING IN OR MD ACCN AT HEMA LINE AND THIMAYA LINE UNDER GE (MCTE) MHOW

Amount

Item No.1 Taking down copper/ aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Item No.2 Taking down carefully copper/ aluminium Sub main wiring of any size from surface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Item No.3 Taking down old/unserviceable LT indore panel/ TPN/ SPN DBs, distribution board by disconnection of electric connection carefully SPN DBs/ TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Item No.4 M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed/ surface conduit of white/ ivory colour including all accessories after cutting chasing in wall/ ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2mm thick, 60mm deep with earth dolly duly, covered with white cover plate with suitable rectangular box inner frame suitable for switches, including fixing of suitable hylem sheet PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chases and making good disturbed surface to match with existing finish with required plaster complete all as specified and directed for the following :-

Item No.4 (a) One light point, fan point, bell point controlled by one, one way switch 5 Amps

Item No.4 (b) One light point controlled by two, two way switch 5 Amps

Item No.4 (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the SAME BOARD.

Item No.4 (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Item No.5 All as per item No 4 here in before but using 2.5 sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sqmm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No.6 S & F for Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

Item No.7 S & F for Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.

Item No.8 S & F for Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

Item No.9 S & F for Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

Item No.10 S & F for Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

Item No.11 S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed.

Item No.12 S & F for Bell push 5 Amps single module complete all as specified.

Item No.13 S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

Item No.14 S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Item No.15 M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note :- Two runs of 6 sqmm for P and N and one run of earth and one run of PVC conduit will be measured as one unit

Item No.16 All as per item No.15 here in before but using 4.0 sqmm cable. Note :- Two runs of 4 Sqmm for P and N and one run of earth and one run of PVC conduit will be measured as one unit.

Item No.17 S & F for lamp holder, PVC/ Polycarbonate type with back plate/ square box suitable for batten/ slanting fittings complete all as specified and directed.

Item No.18 S & F for Highly efficient LED Bulbs, 10 watts in B-22 cap complete all as specified and directed. Make : Bajaj, Havells, HPL

Item No.19 S & F for wall mounted LED tube light fitting 20 watts for surface mounted, anodized extruded aluminium housing, Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient high transmissitivity diffuser, high lumen ouput 230 volts and intregrated electronic driver connector block etc. complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make : Havells Cat Part No LUMILINE+BS10WLED865SPCSS or its equivalent in Philips, Wipro, CG.

Item No.20 S & F for Decorative wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base and including fixing of LED bulb 10 watts complete all as specified and as directed. Make : Havells Cat Part No LHFOAJE1TZ1I060 or its equivalent in Philips, Bajaj, CG.

Item No.21 S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make : Havells Cat Part No LHEXACP7IN1W010 or its equivalent model in Wipro, Philips.

Item No.22 S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make : Havells Cat Part No. HEXAFT10WLED857SSYMBOPC 10W LED or its equivalent in Philips, Wipro CG.

Item No.23 S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 1.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make : Havells, CG, Philips, Wipro.

Item No.24 S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc or with Rectangular wooden box suitable size for fixing of DB and making good distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No.25 Supply and Fix in repairs flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of space for 100-125 Amps MCCB as incomer and SPN/TP MCBs as out going, 4 way (Optimum 1+12 Module) including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc or with Rectangular wooden box suitable size for fixing of DB and making good distrubed surface to match with existing colour of wall complete all as specified and directed by Engr-in-Charge.

Item No.26 Supply and fix MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-in-Charge. Make : Indoasian or equivalent in Crompton/ L&T/ ABB/ Scheider/ Havells.

Item No.27 Supply and fix MCB SP 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-in-Charge. Make : Indoasian or equivalent in Crompton/ L&T/ ABB/ Scheider/ Havells.

Item No.28 M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with one single pole MCB SP 20 Amps complete all as specified and directed. Make Indoasian Cat Part No 810393 or equivalent in Crompton/ L&T/ ABB/ Scheider/ Havells.

Item No.29 Supply and fix MCCB 100 Amps 16KA, including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-in-Charge. Make : Indoasian or equivalent in Crompton/ L&T/ ABB/ Scheider/ Havells.

S.S. Engineers