Installation of Sprinkler Irrigation System

Amount

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc i) 50mm dia

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc i) ii)15mm dia

Providing and fixing gun metal gate valve with C.I. wheel of approved Quality (Screwed end): i) 40mm nominal bore

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc.,all as per requirement and direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp

7.5 HP three phase vertical multistag high pressure centrifugal pump set 8 stage ( Crompton Greaves/ Aquatic /CRI/ V- Guard / Calma Make ) with star delta starter ( Crompton Greaves / Control & Switch Gear / BCH / L&T / Seimens make) Fully Automatic Citation

Pannel Board CNS

Cable 6 mm

Providing P.P Rope of 16mm dia

Providing and fixing of well cover of 175mm

Providing and fixing of agree pipe of 250mm

Providing and fixing of column pipe upto 65mm

Providing and fixing of pump adapter 65mm

Providing and fixing of HDPE pipe of 6mtr long

Providing and fixing of HDPE bend with coupler

Providing and Fixing of Foot Batten Assembly

Providing and Fixing of Sprinkler Nozzle

Providing and fixing of filter upto 150mm

Providing and fixing of HDPE pump connect nipples

Providing and fixing of HDPE end Plug

For Electrical Connection

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared

Evergreen Enterprise