Construction of Guest House

Amount

Earthwork

Clearing grass and removal of rubbish upto a distance of 100.0 m outside the periphery of the area cleared By Manual Means

Felling trees of girth (measured at a height of 1.0m above ground level) including cutting of trunks and branches and removing the roots and stacking of serviceable material and disposal of unserviceable material with all lifts and upto a lead of 100.0m and earth filling in the depression I pit (a) Girth from 30 cm to 60 cm

Earth work in excavation exclusive of compensation of earth in (a). Hard Soil (b). Earthwork in combined lead upto 15.0 m including breaking of clods

Earthwork in excavation in foundation trenches etc. not exceeding 2.0m depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15.0 cm layers as in column foundation, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30.0 m (b) Hard Soil (Pick Work)

DAMP PROOF COURSE

Providing and laying dam proof course 40mm thick with cement concrete 1:2:4 (1 -Cement : 2 - Course Sand :4 - Stone aggregate 12.5mm size)

SOLING/PCC/RCC WORK

Providing and filling stone aggregates of size below 90 mm in plinth, etc. in layers not exceeding 10 cm in depth, consolidating each layer by ramming and watering and dressing complete

Providing and laying plain cement concrete 1 : 3 : 6 (1 cement : 3 course cement : 6 graded stone aggregate 20 mm nominal size) excluding cost of centering and shuttering in (a) Foundation and plinth :

Providing and filling approved river sand in trences, plinth etc. in layers not exceeding 20 cms in depth, consolidating each layer by ramming and watering and dressing complete.

Providing and laying in position reinforced cement concrete excluding cost of centering and shuttering, finishing and reinforcement in all work upto plinth level a) 1:1.5:3 (1 - Cement : 1.5 - Coarse Sand : 3 - stone aggregate 20mm nominal size)

Reinforced cement concrete work in walls including attached pilasters, columns, pillers, posts, piers, abutments, return walls, retaining walls, struts, buttresses, string or lacin courses, fillets etc. upto floor five level exclduing cost of centering shuttering etc complete (a) 1 : 1.5 : 3 (1 - Cement : 1.5 - Course Sand : 3 - Graded Stone)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands. plain window sills, staircases and spiral stair cases above plinth level upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement complete (a) 1 : 1.5 : 3 (1 - Cement : 1.5 - Course Sand : 3 - Graded Stone)

REINFORCEMENT

Steel reinforcement of RCC work including straightening, cutting, bending, placing in position and binding all complete b) TMT Bars of Grade Fe 500 or more

FORMWORK

Centring and shuttering including strutting, propping etc and removal of form work for all heights (a) Foundation, footings, bases of columns etc. and mass concrete.

Centring and shuttering including strutting, propping etc and removal of form work for all heights (b) Columns, Pillars, piers, abutments, posts and struts

Centring and shuttering including strutting, propping etc and removal of form work for all heights (c) Walls including attached pilasters, buttresses, string courses etc.

Centring and shuttering including strutting, propping etc and removal of form work for all heights d). Suspended floors, roofs, landings, shelves and their supports, balconies and chajjas, etc

Centring and shuttering including strutting, propping etc and removal of form work for all heights e). Staircases including landings

Centring and shuttering including strutting, propping etc and removal of form work for all heights f). Lintels, beams, plinth beams, girders, bressumers and cantilevers etc

BRICKWORK AND PLASTERING

First class brickwork in foundation and plinth in (b) in cement mortar 1 : 4 ( 1 cement : 4 coarse sand)

Half brick masonry with first class bick in foundation and plinth b) in cement mortar 1 : 4 ( 1 - cement : 4 - coarse sand)

First class brickwork in superstructure above plinth level upto floor V level in( b) in cement mortar 1 : 4 ( 1 - cement : 4 - coarse sand)

Neat cement punning

15mm cement plaster on rough side of single half brick wall of mix 1:4 (1 cement: 4 fine sand)

12mm cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand)

6mm cement plaster to ceiling 1 : 4 ( 1 cement : 4 fine sand)

FLOORING AND WALL TILING

Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 40mm thick with 20mm nominal size stone aggregate

Providing & laying vitrified floor tiles in different sies (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on bed of 20mm thick cement mortar 1: 4 ( 1 cement : 4 course sand), including the joints with white cement and matching prigments etc. complete as per design colours a) Full body polish vitrified

Providing & laying vitrified floor tiles in different sies (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, in skirting / dado, riers of steps, over 12mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 course sand), including the joints with white cement and matching prigments etc. complete (a) Full body polish vitrified

Coloured polished grainte slab of size not less than 1200 mm x 600 mm x 20 mm thick in flooring, treads of steps and landings laid over 20mm (average) thicl base of cement mortar 1 : 4 and jointed with white cement slurry including rubbing and polishing complete General Red

Coloured polished granite slab 20mm thick in skirting, riser of steps, dado, vertical face of pedesatl etc. laid on 12mm (average) thick base of cement mortar 1 : 3 and jointed with white cement slurry including rubbing and polishing complete General Red

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard,jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement concrete mortar 1 :4 (1 - cement : 4 - coarse sand) (a) Light Shade using white cement

Providing and fixing ceramic glazed floor tiles of size 300 x 300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622of approved make in all colours, shades, except white, ivory, grey fume and red brown, laid on 20mm thick cement mortar 1 : 4 ( 1 cement : 4 course sand) including pointing the joints with white cement and matching pigments etc. complete as per designed colour b) Matt / Anticratch

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as appaorved by Engineer in charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1: 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry @3.3 kg per square metre including pointing in white cement mixed with pigment of matching shade complete

WOOD WORK

Providing 1st class local wood dressed in frames of sill, upright, batten, post, beams, etc. as strcutural members fixed in position complete

Providing and fixing flush door shutters, non-decorative type, core of black board construction with frame of 1st class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters a) 40 mm thick including anodised aluminium butt hinges with necessary screws

Providing and fixing 1st class teak wood panelled shutters for doors etc. including MS butt hinges with necessary screws etc. complete (a) 40mm thick

ALUMINUM AND GLAZING WORK

Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard sections / other sections of approved make conforming to IS : 733 and IS : 1285 fixing with dash fasteners of required dia and size including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gaskets etc. aluminium setions shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,aluminium span beading for glazing / panelling, CP brass I stainless steel screws all complete including fixing of glasses but excluding cost of glasses c) Powder coated i) 2 - track sliding windows I ventilators

Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard sections / other sections of approved make conforming to IS : 733 and IS : 1285 fixing with dash fasteners of required dia and size including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gaskets etc. aluminium setions shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,aluminium span beading for glazing / panelling, CP brass I stainless steel screws all complete including fixing of glasses but excluding cost of glasses c) Powder coated ii) 3 - track sliding windows / ventilators

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS : 733 and IS : 1285, anodised transperent or dyed to required shade according to IS : 1868 (minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC I neoprene felt etc. Aluminium sections shall be smooth, rust free, straught, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beadng for glazing or paneling, CP brass / stainless steel screws, all complete etc as per architectural drawings and the directions of Engineer in charge. (Glazing and paneling to be paid separately) Powder coated

Supplying of Glass Panes at site a) 4.0mm thick plate sheet glass

Supplying of Glass Panes at site b) 4.0mm thick frosted glass

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in charge (Door handle, lock and stopper etc.to be paid separately).

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and mill wirith

PAINTING/MS GRILL

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with water and weather proof paint (Latex Emulsion Base) on cement works of approved brand and manufacture (ISI / ISO Certified) of required shade on new work (two or more coats) to give an even shade

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New Work (one or more coats)

Applying priming coat with ready mixed primer of approved brand and manufacture on plaster surface

Painting with oil type wood preservative of approved brand and manufacture. New Work (Two or more coats)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade

STAINLESS STEEL RAILING

Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates, etc, including welding, grinding, buffing, polishing and making curvature (wherever requird) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing and with necessary accessories & stainless steel bolts, etc. of 80 cm high in staircase, etc consisting of 75mm for rail and post, 63mm for logitudinal intermediate rail and 25mm of vertical section, spacing 125mm interval and as per approval of Engineer in charge

FALSE CEILING

Providing and fixing false ceiling with 12mm thick plain / or with design ceiling tiles of Sqm BWP type phenol formalhyde synthetic resin bonded pressed particle board conforming to IS : 3087 finished with a coat of aluminium primer on both sides & edges and two oats of synthetic enamel paint of approved quality on exposed face to a grid made out of anodised aluminium (with 15 micron anodic coating) T sections 35x 15 x 1.5 mm size main runners and cross runners 23.5 x 19 x 1.5 mm fixed to main runners placed 600mm centre to centre both ways so as to form a grid of 600mm sqaure. The frame work shall be suspended from ceiling by level adjusting hangers of 6mm dia MS rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with

PRESEED CLAY

Providing and laying pressed clay tiles (as per approved pattern 20mm nominal thickness of approved size) on roofs jointed with cement mortar 1 : 4 ( 1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20mm thick cement mortar 1 : 4 ( 1 cement : 4 coarse sand) and finished neat complete

DRAINAGE WORKS

Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation, levelling & dressing & finsihing the top smooth

Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortarl : 3 (1 cement : 3 fine sand) including shuttering complete.

Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design. a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).

DOOR AND WINDOW FITTINGS

Providing and fixing MS pressed butt hinges bright finished with necessary screws etc. complete a) 150mm x 65mm x 2.12mm (Medium Type)

Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size)

Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete a) 250mm

Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete b) 150mm

Providing and fixing Brass Tower bolts (Socket bolts) bright finished with necessary screws etc. complete a) 250mm

Providing and fixing Brass Tower bolts (Socket bolts) bright finished with necessary screws etc. complete b) 150mm

Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete a) 125mm

Providing and fixing CP brass Handles with necessary screws etc complete a) 150mm

Providing and fixing MS fan clamp 12mm dia HYSD bar bent to shape with hooked ending RCC slabs during laying including paiting the exposed portion of loop complete

Providing and fixing CP Brass sliding door bolts (aldrops) bright finished with nuts and screws etc complete a) 300mm x 16mm

Providing and fixing 150mm height bright finished brass floor door stopper with rubber cushion, screws, etc. to suite shutter thickness complete

Providing and fixing bright finished brass door closer with necessary screws, etc. complete. Hydraulic Type

Providing and fixing bright finished brass two lever mortise door lock with necessary screws, etc. complete (Make: Godrej or equivalent)

PLUMBING AND SANITARY INSTALLATIONS

Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with CI brackets and stainless steel plug 40mm, including painting of fittings and brackets,cutting and making good the walls wherever required :Hindware/Nirali/Cera or equivalent. Single sink 610 x 510 mm bowl depth 200mm

Providing and fixing vitreous china pedestral type watercloset (European type WC pan) with seat and lid 10 litre lowlevel white PVC flushing cistern, including flush pipe, with manual controlled device (handle lever) conforminf to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and fllors whereever required: (i) White (Make: Parryware/Hindware/Cera/ Kohler )

Providing and fixing white vitreous china wash basin standard of Parryware/Hindware/Cera/ Kohler and equivalent make with R.S. or C.I brackets,l5mm C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required.(a) Vitreous china wash basin size 630 x 450mm with single 15mm C.P. brass pillar taps (i) White

Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleat with CP brass screws (heavy quality) a) 750 mm x 20 mm size

Providing and fixing 600mm x 450mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleat with CP brass screws and washers

Providing and fixing glass shelf diplomat of Essline / Omkar/Armeco or equivalent make with CP brass brackets and guard soil complete fixed to wooden cleats with CP brass screws (a) Glass shelf diplomat 510mm

Providing and fixing on wall face SWRPVC soil waste and vent pipes including joining with rubber / lubricant / cement solvent complete a) 110 mm dia

Providing and fixing SWRPVC plain bend of required degree (45 degree) including joining with rubber / lubricant / cement solvent complete a) 110 mm dia

Providing and fixing SWRPVC plain bend of required degree (87.50) including joining with rubber / lubricant / cement solvent complete a) 110 mm dia

Providing and fixing SWRPVC socket including joining with rubber / lubricant / cement solvent complete a) 110 mm dia

Providing and fixing ventilation cowl including joining with rubber / lubricant / cement solvent complete a) 75 mm dia SWRPVC vent cowl

Providing and fixing WC connection bend type (Siphon) (SWRPVC) including joining with rubber / lubricant / cement solvent complete

Providing and fixing toilet paper holder (a) CP Brass

Providing and fixing chlorinated polyvinyal chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,including fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge a) 15 mm dia nominal bore

Providing and fixing chlorinated polyvinyal chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,including fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge b) 25 mm dia nominal bore

Extra for concealed in brick and RCC works by making chases upto 7.5 x 7.5 cm in walls and making good the same after housing pipes

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards (Make: Jaquar, Hindware, Cera, Kohler) a) 15 mm dia nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (Make: Jaquar, Hindware, Cera, Kohler) a) 15 mm dia nominal bore. Class - I

Providing and fixing GI union in GI pipe including cutting and threading the pipe and making long screws etc complete (New work) a) 15 mm dia nominal bore

Providing and fixing GI union in GI pipe including cutting and threading the pipe and making long screws etc complete (New work) b) 25 mm dia nominal bore

Providing and fixing 15 mm nominal bore CP brass angle stopcock for basin and geyser points of approved quality conforming to IS : 8931 Class - II (Make: Jaquar, Hindware, Cera, Kohler)

Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 450 with jointing, testing complete including cutting and making good etc a) 15 mm dia nominal bore

Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 450 with jointing, testing complete including cutting and making good etc b) 25 mm dia nominal bore

Making connection of Astral CPVC pipes distribution branch by providing and fixing Socket / Coupling with jointing, testing complete including cutting and making good etc a) 15 mm dia nominal bore

Making connection of Astral CPVC pipes distribution branch by providing and fixing Socket / Coupling with jointing, testing complete including cutting and making good etc b) 25 mm dia nominal bore

Making connection of Astral CPVC pipes distribution branch by providing and fixing Reducer Coupling with jointing, testing complete including cutting and making good etc a) 15mmX25 mm

Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete a) 25 mm dia nominal bore

Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inlet (Make: Jaquar, Hindware, Cera, Kohler) a) 150 mm dia

Providing and fixing chromius plated brass wall mixer 15mm nominal bore of approved make (Make: Jaquar, Hindware, Cera, Kohler) with necessary fittings including and making good the wall (iii) Wall mixer with L - bend (provision for OH shower)

Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap

Providing and fixing C.P. brass 32mm size Bottle trap of approved quality & make and

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler - 110 mm diameter

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised • PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 110mm diameter

Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown or/and residual bitumen applied hot @ 1.45 Kg. per Sq.m. of area for each courses, second course of roofing felt type-3 grade-I (hessian base self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea size gravel spread at 6 Cu.dm. per sqm. including preparation of surface excluding grading complete

Sri Vijetha Engineers and Infrastructure Pvt Ltd

Aakar Engineers and Contractors