Restoration of power supply to University Health Centre on the O.U campus.

Supply & erection of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I). Makes : Universal / Polycab / Havells

Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 50 Sq,mm, covering the cable with bricks and back filling of Trench duly providing Cable route Indicators of size 152mm round/ 102mm x 102mm / 152mm x 152mm in CC concreate including cost and conveyance of materials and labour charges etc., complete.

Supply & fixing of bus bar chamber wall mounted of rating 100A, 415V, 3-phase consisting of ETP GRADE copper material bus strips of size 25mm x 7mm x 2mm thick, enclosure made from 20 SWG CRCA sheets protected with a seven-tank phosphating process and painting with powder-coated (factory finished) including cost and conveyance of all materials and labour charges etc., complete. Makes : SELVO or its equivalent.

Supply and fixing of heavy duty long barrel copper lugs confirming to I.S specifications suitable for 50 Sq.mm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent make as approved by the department.

Supply and run of 4 of 126/0.4mm (16 Sq.mm) FRLSH / HFFR PVC insulated 1100V grade as per IS:694/1990, IS 17048 specifications Copper cable for mains inlcuding all labour charges etc., complete. Makes : Finolex / RR kabel / Havells

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I (Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through flange with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II).

Supply and fixing of i-base DIN fuse bases of rating 400A in the existing panel board incuding the cost of removing the damaged fuse bases and conveyance of all materials and labour charges etc., complete. Make: HAVELLS

Supply and fixing of 3mm thick hylam sheet in the exisitng panel board duly cutting into suitable size for covering the bus bar and for fixing the door of the panel board with suitable hinges, lock arrangement incuding cost and conveyance of all materials and labour charges etc., complete.

Providing end termination of LT cable in existing panel board / pole / transformer LT termination box duly encapsulatig all the single core leads of the cable with heat shrinkable sleeves and shrinking with LPG gas burner including all material and labour charges etc., complete.

Note : The above rates are exclusive of GST which will be added in each bill.