GE(S)/M-14/2021-22

Amount

M&L for cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in copings, benching and similar works, finished even and smooth including necessary form work complete all as specified and directed.

M&L for M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in kerb stones, set in cement mortar 1:6, including necessary form work, earthwork etc, required complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, including demolition of existing brick masonry built in any mortar complete all as specified and directed.

M&L brick work with sub class 'B' bricks old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified and directed.

Description all as per Srl item No. 8.00 above but Except bricks complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick wall, built in CM 1:4, complete all as specified and directed.

M&L for walling of square rubble, Jodhpur type brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed. (Note:- Pre-cast PCC bond stone shall be measured and paid separately under respective items after deductions from gross quantity of random rubble stone masonry).

Description all as per srl item No 11.00 here-in-before but (EXCEPT STONES) complete all as specified and directed.

Extra over stone walling built in lime or sand stone, for hammer dressing to face stones with maximum depression on face from straight edge held against the dressed surface n. exc. 20mm and dressing of face beds and joints as specified of randam rubble walling, uncoarsed or brought upto courses complete all as specified and directed.

M&L for form work to faces of walls, rataining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

M&L for MS deformed or twisted bars 10mm dia and above, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

Description all as per srl item No 15.00 here-in-before but 6 to 8mm dia, bars complete all as specified and directed.

M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only chain link MS galvanisd medium coated as per IS 4826 fencing 75mmx75mm mesh and 3mm dia of wire, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type and standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

S&F of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F "as in repair" for concentina punch type wire 610mm dia of each coil avg. weight n. less than 1.06 Kg/RM after streching including coating of anti rust compound fixed on angle iron brackets top of compound wall including taking out existing concentina coil complete all as specified and directed.

Labour only for taking down and refixing/restraining resecuring including making good concentina punch type wire (any dia) fixed on angle iron brackets top of compoun wall complete all as specified and directed.

Labour only for restraining resecuring including making good staples etc. to existing galvanised 2 strand steel barbed wire complete all as specified and directed.

Stone sett flooring (Granite, trap or basalt stone) with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and stuck flush complete all as specified and directed.

Description all as per srl item No 24.00 here-in-before but (EXCEPT STONES) complete all as specified and directed.

M&L for Fly Ash glossy finished coloured chequered cement concrete tiles of size 30cm X 30cm X 25mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment to match as in floors over and including 15mm thick screed bed or bedding layers in CM 1:6, including dismantling existing floor, hearth or wall tiling of any description, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base of floor, complete all as specified and directed by Engineer-in-Charge.

M&L for 60mm thick machine pressed precast concrete interlocking paver block, white cement layer of 6 to 8 mm coated with epoxy coating (Red/Yellow), built with grey cement and pigment of any shape and size, confirming to IS 15658-2006 (M-35 Grade) over and including 50mm thick sand filling under paver, properly levelled etc, including taking out existing interlocking paver block complete all as specified and directed.

Description all as per srl item No 28.00 here-in-before but (EXCEPT INTERLOCKING PAVER BLOCKS) complete all as specified and directed.

M&L for 80mm thick machine pressed precast concrete interlocking paver block, white cement layer coated with epoxy coating (Red/Yellow), built with grey cement and pigment of any shape and size, confirming to IS 15658-2006 (M-40 Grade) over and including 50mm thick sand filling under paver, properly levelled etc, including taking out existing interlocking paver block complete all as specified and directed.

Description all as per srl item No 30.00 here-in-before but (EXCEPT INTERLOCKING PAVER BLOCKS) complete all as specified and directed.

M&L for 15mm thick rendering in two layers (base layer 10mm thick in CM 1:6 and finishing layer 5mm thick in CM 1:4) including and mixing of liquid water proofing compound @ 0.200 ltr per 50 kg bag of cement, on brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for flush pointing in cement mortar 1:4 to random rubble masonry, uncoursed or brought upto courses of any description complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surfaces of any description not otherwise described n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of external wall and applying two coats of cement base paint including curing before and after, including a coat of alkali-resistant priming paint complete all as specified and directed.

M&L for preparation of old plastered surfaces of external wall and applying one coat of cement base paint including curing before and after, complete all as specified and directed.

M&L for preparation of old plastered surfaces of external wall/facia and applying one coat of Acrylic Emulsion Paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of external wall/facia/ceilings, kerb stones etc and applying two coats of Acrylic Emulsion Paint over a coat of primer complete all as specified and directed.

M&L for demolition of (reinforced) cement concrete of any description and in any position not otherwise specifically provided for including removal of debries from the site n. exc. 50m from starting point etc complete all as specified and directed. Note:- Reinforcement cut as required to facilitate demolition).

M&L for demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

M&L for demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for including removal of debries from the site n. exc. 50m from starting point etc complete all as specified and directed.

M&L for dismantling fencing wire mesh, any type complete all as specified and directed.

Dismantling wrough iron or mild steel work of any description complete all as specified and directed.

M&L for taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of deberies out of MoD land complete all as specified and directed.

M/s Ashoka Brothers

M/S CANTILEVER ENGINEERS

AV ENTERPRISES

Bidder Name

AV ENTERPRISES

M/S CANTILEVER ENGINEERS

M/s Ashoka Brothers

M/S D N CONSTRUCTION