Supply installation testing and commisioning of 16 mtr High Mast including services connection at FSD Bhalukpong.

Amount

Supply,Installation,testing and Commissiong of 16 meter height raising/lowering type hot dipped galvanized High Mast shaft in two section with top dia and thickness 150 mm, 3mm respectively and bottom dia 360mm, 4mm respectively suitable for wind velocity as 55 m/ sec,alongwith Head frame sliding galvanized lantern carriage capable of moving up and down the mast complete with self aligning mechanism guides and capable of receiving 10 Luminaire,raising lowering system comprising double drum winch, 6mm diameter SS wire rope,ERP insulated 5 Core 4 Sqmm PVC Sheathed Trailing cable,Connectors as required,Integral power tool three phase motor,manual handel, junction box,Heavy gauge hot dip galvanized lighting finial for protection of High Mast,lightning finial/spike with 1Cx35 sq. mm Copper flexible cable shall be used as a down conductor from lightning finial to the bottom of High Mast,foundation bolt manufactured from special steel along with nuts, washers, anchor plate and common templates,1 No of Double Dome aviation light,Supply of foundation bolts suitable for this high mast manufactured from special steel along with nuts,washers,ancho plates & Templates,Designing & Casting of suitable open raft type RCC shallow foundation with M25 grade concrete (1:1:2) embedded upon plain cement concrete of grade 1:4:8 for High Mast including centering shuttering and steel reinforcement as specified in the drawing or as per the direction of engineer-in-charge suitable for 16 mtr high mast considering the safe soil bearing capacity at size as 10 T/ sq metre at 2 Metre depth including positioning of suitable foundation bolts, nut, washer, pdg straightening cutting, bending schedule & Drawing complete as PVC pipe of 110 mm dia for cable entry upto desired level with all materials and labours, Heavy duty crane as required.

Fabrication, supplying, Installation,testing, commissioning of Double Door front openable outdoor type feeder pillar suitable for 440Volts, 3 Phase, 50 Hz AC supply made out of 2 mm thick CRCA and 300 mm deep with 100 Amp, 4 strips aluminim busbars duly PVC sleeved, making connection, interconnection with solid aluminum bars and providing suitable CC foundation with 50 mm x 50 mm x 6 mm thick angle iron framework with 30 cm legs grouted in foundation, complete with removable gland plates, locking arrangement, earthing and painting etc as required alongwith Provision for 2nos L-Draw Locking System for tender pillarwith 2nos Lock & Key arrangement Completed as required, 32 AMP TPN MCB 1 No, 25 AMPS TP Contactor 1No,09 AMPS TP Contactor 2 Nos ,Single Dial Time Switch 1No,Glass Fuse 1No,Push Bottom 2 Nos,Toggle switch 1No,Neutral Link 1No ,7 Tank chemical treatment powder coated for long lasting finish.

Supply of 200 watt LED Flood light Luminaries of Area Lighting with energy saving Main Housing, Power coated pressure dia cast aluminium housing, Front Clear toughened glass, Suitable secondary lens for better light distribution.

Supply and Laying of one No. PVC insulated & PVC sheathed/XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsory ISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1 as required direct in ground i/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd.

CABLE SIZE 4 X 16 SQ.MM

Supply and Laying of one number additional PVC insulated and PVC sheathed / XLPE XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsory ISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1 in the existing RCC/ HUME/ METAL pipe as required.

CABLE SIZE 4 X 16 SQ.MM

Supply and Laying of one number additional PVC insulated and PVC sheathed / XLPE XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsory ISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1 (clamped with 1mm thick saddle) on the wall surface as reqd.

CABLE SIZE 4 X 16 SQ.MM

Supplying and fixing of light class G.I. pipe of 50 mm dia.(nominal) 3 metres length along the pole for protection of under ground cable as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

M/s Indra Construction

Sudarshna cooling centre and electricals

D.D. Metal Corporation