SE/GC/TIN/C42/2019-20

Amount

Picking 5 to 10cm old metalled surface and sectioning 1m2 including clearing the road side jungle growth and existing road surface by removing loose stone by picking, dust on road surface by using air compressor and earth/slit on road side and disposing the same with lead of 500m over initial lead and lift including cost of all materials, labour, lead, lift, tools and plants etc., complete.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 150mm thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub base/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labours charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 406 of MORTH Rev-5.

Providing and laying prime coat over WBM/WMM surface using 7Kg of Emulsion Bitumen (SS1) per 10m2 for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 502 of MORTH REV-5.

Providing and laying tack coat over WMM (treated with primer) using 2.5Kg of Bitumen Emulsion (RS1) per 10m2 for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 503 of MORTH Rev-5.

Providing and laying 50mm consolidated thick bituminous macadam using 0.20cum of 26.50-13.20mm, 0.43cum of 13.20 - 2.36mm and 0.08cu of 2.36mm & below size IRC metal with 37kg of VG30/VG40 bitumen for premixing per 10m2 including cost and conveyance of all in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne vibratory/pneumatic roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30T CMP with bitumen boiler tipper trucks, paver finisher/9m paver finisher, vibratory/Pneumatic roller and all other tools and plants required including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 504 of MORTH Rev-5.

Providing laying and rolling of close graded premix carpet of compacted 20mm thickness using 0.0162cum of 13.20-11.20mm, 0.1404cum of 11.2-5.6mm, 0.0729cum of 5.60-2.80mm 0.0405cum of 2.80mm and below (type B) graded HBG metal using 19kg of VG30 bitumen for 10m2 including premixing at CMP, conveyance by tipper lorry, laying by paver finisher and rolling by Vibratory Roller including cost and conveyance of all materials, hire charges of all other incidental charges etc., complete as per specification using CMP as per clause 508 of MORTH Rev-5

Providing and laying of Gravel including cost and conveyance of the same to work site from approved quarry including stacking the same to departmental gauge for pre-measurement including all labour charges for laying, spreading etc., complete for making up of low berm.

GST 12% as per Govt. Norms

Sp Constructions