REPAIR/RESURFACING OF CERTAIN ROADS AND CONNECTED ITEMS AT RATNUCHAK MIL STN UNDER GE KALUCHAK

Amount

Premix bituminous macadam with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade VG-30 grade by weight of total mix (Consolidated thickness 75mm or less), laid / rolled and compacted to required gradient and camber using power roller 8 to 12 tonne,complete all as specified and as directed.

Repair to pot holes, not exceeding 30mm depth and not exceeding 01 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, and applying evenly a priming tack coat with bituminous primer (Viscosity Grade Paving Bitumen of Grade VG-30) at the rate of 5 Kg per 10 Sqm of surface, putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 Kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings), complete all as specified and as directed.

Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Paving Bitumen of Viscosity Grade VG-30) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content of viscosity grade VG-30 by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using 8 to 10 tonne power roller, complete all as specified and as directed.

Cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No DA 972.00 fixed with and incl MS stud of suitable size as per manufactures instructions, complete all as specified and as directed.

Solar cat eye aluminium alloy shal (100%) water proofing design according to 65 of size 125mm x 125mm x25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2v / 1600MA) consisiting of super bright LED with 10000 to 18000 mcd completed as per manufactures instructions etc . complete all as specified and as directed.

Preparing bituminous surface of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed.

M/S VED PAUL MAHAJAN (BID ID -3157023)

SAINT SOLDIER ENGINEERS AND CONTRACTORS PVT. LTD. (BID ID -3154009)

Sarbat Construction Co (BID ID -3162810)