SPECIAL REPAIR IN OTM BLDG NO T-3 ADH OR LINE AND PROVISION OF SEWERAGE TANK WITH RETAINING WALL AND SEWERAGE LINE BEHIND BLDG NO T-43 OF (TA) ECO DOGRA AT KUFRI UNDER GE (I) JUTOGH

Amount

Demolition of cement concrte (un- reinforced) in ground floor and paving n. exc 15 cm thick bleow or above hround level, complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified and directed.

M&L for stone masonry randum rubble, well bonded, bedded and solidly hearted in CM 1:6 in retaining,tow,parapet, walls abutments brought upto coarses including necessary provn of weep holes etc., complete all as specified and directed.

M&L for rendering 15mm thick CM 1:4 on fair face of brick or concrete surface finished even and smooth witout using extra cement complete all as specified and directed.

M & L for preparation of new external surfaces of wall & applying two coats of cement based paint over chalk whiting complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in copings/ bond stones, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed.

Taking down chawkhat or frame with (without taking of shutters from the frames) exc 1.50 sqm but n. exc 4sqm complete all as specified and directed.

All as per Srl Item No 08.00 above but n.exc 1.5 sqm., complete all as specified and directed.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 30mm flush shutters, solid core construction, with block board core and plywood face panells, commercial types on both sides incl teak wood beading alround the shutters complete all as specified and directed.

S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters factory made open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a), complete all as specified and directed.

S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of window shutters as specified in SSR Part-1, complete all as specified and directed.

S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge and making it good to match with existing surface, complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Dismantling of boarding of any description and in any position, complete all as specified and directed.

M&L for solid PVC as in use wall/ceiling lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as pe specifications and drawing incl necessary beading work, incl same board beading for joint sealed, complete all as specified and directed.

S&F 9mm thick in 5 layer Plywood, grade BWR, type BB, fixed withscrews to timber frame work etc., complete all as specified and directed.

S&F 1.5mm thick decorative laminate(mica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.

Dismantling timber scantlings in any position in fillets, rails, posts, rafters , purlins, etc. under 40 sq. cm in section (Unframed work), complete all as specified and directed.

M&L for plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 13 sq.cm and not exc 25 sqcm, incl paintings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified

S&F mild steel framed work as in grills,guard bars etc. with ends of bars shouldered/ welded and/or riveted and other simillar works confirming to Fe410-0 or Fe310-0, complete all as specified and directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy bracketsframing (beam, tee, angle, gusset plate, channel or flat section including distance pieces, cleats etc, structural steel confirming to Fe-410w, Gde 250, quality 'A', complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56mm fixed nominal dia of wire and avg widh of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple, complete all as specified and directed.

S&F 3mm thick Sheet glass, ordinaly quality and glazing with oil putty or secured with wdn beads as required in square n exc 0.5 sqm in each pane, complete all as specified and directed.

M&L 50mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, laid in 1:20 slope as in plinth protection, coping, surface finished even and smooth without using extra cement, with and incl use and waste of necessary form work complete all as spd.

S&F Mild steel butt hinges medium weight , cold rolled, 50mm, ISI marked, complete all as specified and directed.

S&F 2nd class hard wood hollock small fittings such as brackets of any type, latch and hinge blocks, door stops and window stops, the like incl all necessary labours articles n. exc 200 cum, complete all as specified and directed.

S & F 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F 125mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F in repair of 300mm mild steel ordinary rat tail rod pattern door spring incl roller and roller plate, complete all as specified and directed.

M&L for mild Steel works as in bends straps, hold fasts etc, conforming to IS-206202006 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified and directed.

M&L for preparation of new or previourly untreated surface of wood or board materials of any description not otherwise described over 10cm in or girth & appyling two coats of synthetic enamal paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any guage thickness incl Nainital pattern as in roof covering complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges ,flashing, eaves board, valley gutter etc, fixed all as per manufactures's instructions, fixed with self tapping screws, with suitable arangement as required, complete all as specified and directed.

S&F for Pre- painted galval+B53ume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges ,flashing, eaves board, valley gutter etc, fixed all as per manufactures's instructions, fixed with self tapping screws with suitable arangement as required, complete all as specified and directed.

S&F CGI sheeting 0.63mm thick with grade of zinc coating 275 as in roof covering fixed with L or J type hooks or self thread making steel screws of length not less than 75mm with suitable arangement as required, complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid & dado and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing,complete over and including 15 mm thick screed bed or bedding with CM 1:6 ,etc., complete all as specified and directed. Note:- (i) The rate of kota stone shall be deemed to incl for full rounded off corner/ edges incl holes for pipe all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and kota polishing to achive the desired granite finish all as spfd.

Roughening surface of old concrete by picking,sweeping clean and washing down eith water to remove dust and brushing neat cement slurry with 3.0 kg of cement per sqm, complete all as specified and directed.

S&F for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate, as in filling of mass concrete for sub base floors complete all as specified and directed.

M&L for cement concrete/ colour chequered tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished,over screed bed as in CM 1:4,15mm thick, complete all as specified and directed.

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

Dismantling timber scantling un framed work 40 sq cm and over in section in any position, unframed work, complete all as specified and directed.

M&L for 2nd class HW clean sawn timber scantling/ posts complete all as specified and directed.

Dismantling of floor hearth or wall tiling/stone slabe incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed.

M&L for joint free Non Skid glazed coloured ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:6) complete all as specified and directed.

M&L for glazed coloured ceramic tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm/ 300x200x6to7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in cement mortar 1:4 complete, complete all as specified and directed.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore, including taking down, complete all as specified and directed.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore, including taking down, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismentling of existing tank, complete all as specified and directed.

S&F 21-22 inch dia galvanised mild steel pan mortar (Tasla/ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut bolt with 8 Nos washer including fixing on water storage tank as tank cover, complete all as specified and directed.

S&F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair 15mm brass CP wash hand basin/ Bath mixer for mixing hot and cold water, complete all as specified and directed.

S&F in repair 15 mm dia Angle/ stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified and directed.

S&F in repair of 60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing, complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, complete all as specified and directed.

S&F in repair EWC vitreous china wash down water closet pan padestal pattern white with complete fitting including P Trap/S Trap,jet spray and fixing with brass screw, complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 Ltr capacity valveless symphonic action type white as approved with ball valve flat back & handle including brackets complete all as specified and directed.

S&F 5mm thick looking mirror with 6mm thick back ply wood and wooden frame complete including plugging on wall and fixed, complete all as specified and directed.

S&F in repair 20mm dia mild steel powder coated curtain rails fixed with brackets, stops, rollers, etc. complete all as specified and directed.

S&F in repair soap dish approximately size 160 x160x 90 mm and fixed with as chromium plated brass screws complete all as specified and directed.

S&F in repair wash basins, vitreous china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length complete all as specified and directed.

S& F 15mm size PVC connection pipe with PTMT nuts of length 600mm long, complete all as specified and directed.

M&L for 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F in repair,110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC SWR Bends in any radius 110 mm bore with access door, complete all as specified and directed.

S & F PVC SWR Bends in any radius 75 mm bore with access door, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F Mild steel plain black sheet 0.80 mm thick in hearths, covering to door shutter, ducts use as in ceiling, etc, cut to size, edges beaded if directed, holes punched, including round headed screws, clout nails or rivets, fixed to wood or steel members with plain 40mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends,etc as required complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4, type B-1 as in flooring finished even and smooth surface, complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto coarse in CM (1:4) including raking out existing pointing etc., complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Removing demolished/ excavated material /soil .n exc 50m depositing were directed at a level n.exc 1.5m above the starting point, complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel/ drain incl fair finises and necessary formwork, complete all as specified and directed.

Rough excavation n. exc 1.5m deep and getting out in hard and dense soil complete all as specified and directed.

Excavation over areas n exc 1.50m deep and getting out in soft/ disintegrated rock, complete all as specified and directed.

Excavation over areas in hard/dense soil n exc 1.50m deep and getting out soil, complete all as specified and directed.

Returning filling in including spreading, levelling watering & well ramming in layers nexc. 25 Cm thick in each layers complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate, as in coping including necessary form work, weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M&L for precast cement concrete 1:3:6, type C-1, using 20mm graded crushed stone aggreate, as in bond stone for stone walling etc set in CM 1:4, including necessary form work, complete all as specified and directed.

S&F 110mm PVC (SWR) pipes as weep holes in retaining wall, complete all as specified and directed.

M&L for boulder filling dry hand packed tightly as in wire crating apron bunds, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and 1.5 m depth for foundation etc, not.exc 10 Sqm on plan and getting out in hard/dense soil complete all as specified and as directed.

M&L for precast reinforced cement concrete 1:2:4, type B-1, (using 20mm graded crushed stone aggregate) as in landings, cover slabs ( for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:6 including demoltion of reinforced cement concrete, complete all as specified and directed.

S&F 150mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in tranches or in floors, complete all as specified and directed.

M&L for concrete bed to drain pipe in PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed.

M&L for MS TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for MS TMT bars, 5mm dia and over upto and incl 10mm dia as in stirrups, spacers, binders etc cut to shape requred, incl cranking spirally for hooping for columns, hooking ends binding with and including mild steel wire not less than 0.9mm dia complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan socket or power) complete incl. (fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.), removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc, complete all as specified and directed.

M&L for point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed cable and including drawn through PVC casing N capping of 25X32mm size with all fittings and accessories, terminated to PVC board of suitable size for housing/mounting the switches/sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light point control by one, one way switch complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 94.00 above but for one 3 pin socket oulet 5 amps, on independent board, complete all as specified and directed.

All as per Srl item No 94.00 above but for one 3 pin socket oulet 5 amps, on same board with other switches, complete all as specified and directed.

All as per Srl item No 94.00 above but for for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm size FRLS-H PVC insulated unsheathed multistranded copper conductor cable and with 2.5 Sqmm FRLS-H PVC insulated unsheathed multistranded copper conductor as earth wire, complete all as specified and directed

S&F switch piano flush single pole, one way 5 Amp (ISI marked), complete all as specified and directed.

S&F switch piano flush single pole, one way 15 Amp (ISI marked), complete all as specified and directed.

S&F socket (ISI Marked) 2 in 1, 3 pin 5/6 amps flush type, complete all as specified and directed.

S&F socket 2 in 1, 5 pin 5 and 15 amps (ISI marked) flush type universal complete all as specified and directed.

S&F ceiling rose ,3 phase ,PVC polycarbonate, insulated body (ISI Marked) complete all as specified and directed.

S&F LED tube light along with fixture, 1x 20 watt, (4 Feet) wall mounted LED battern, extrudedd PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements ccomplete all as specified and directed.

M&L for lamp holder (Angle) PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED 15 watt complete all as specified and directed.

S&F LED building security light 25 watt fixed on wall suitable bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

S&F LED tube light along with fixture, 1x 10 watt, (2 Feet) wall mounted LED battern, extrudedd PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

S&F 16 Sqmm flat twin core, 1100 Volts grade, stranded, heavy duty, cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than one meter apart including 4 mm suspension wire from LT pole to service bracket and including taking out the unserviceable cable, etc complete all as specified and directed.

S&F sheet metal enclosure MCB DB 8 way SPN double door suitable for 240 V, 200 amps rated bus bar/ DIN rail, fixed and flushed on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed.

S&F MCB, SP (single pole ) 05 to 32 Amps, 10 kA, B curve for inductive load connected through cable lugs of suitable size complete all as specified and directed.

S&F MCB, SPN (single pole and neutral ) 40 Amps for inductive load connected through cable lugs of suitable size complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including galvanised strip protected by 32 mm bore light grade galvanised iron pipe and earth and connected to test point as directed including funnel, watering pipe 20 mm bore light grade galvanised iron wire mesh charcoal and common salt in alternate layers of 15 cm compacted thickness all arround the GI electrode with concrete pit in PCC 1:3:6, type C-1, including necessary excavation in soft/loose soil and disposal of soil to a distance not exc 50 m and necessary testing complete connected to earthing test point, complete all as specified and directed.

shiv const co (BID ID -3144346)

M/s Parmod Kumar (BID ID -3138847)