POLISHING AND PAINTING OF WOODEN AND STEEL FURNITURE AND REPAIR TO TP AND BRANDED FURNITURE UNDER GE NARANGI

Amount

Chair Dining (FD-228, 262, 270, 279 & 285)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Chair writing (FD-280)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Chair Easy (FD-201 & 229)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table Peg (FD-277 & 384)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table Centre (FD-274, 267 & 393)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Teapoy wooden (FD-278 & 382)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table 900x600 mm with drawer (FD-283)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table 900x600 mm without drawer (FD-284)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table dining 1200 x 900 mm (FD/MAP-II/03)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table dining 6 person (FD-269, 273 & FD/MAP-II/03)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table dining 8 person (FD-273 & FD/MAP-II/03)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table writing (FD-249 & 275)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Sofa set 5 seater (FD-281, 373 & FD/MAP-II/02)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Sofa Set 4 seater (FD-281, 373 & FD/MAP-II/02)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table 900x900 mm wooden (FD-88 & 291)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Bed with plytop (FD-246 & 247)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table dressing (Ladies) (FD-251, 378 & FD/E6/MAP/16)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table dressing gents (FD-230, 379 & FD/E6/MAP/14)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Hat Stand with Mirror (FD-233/362)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Chair Dinning with cushion seat (FD/MAP-II/04)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table Office clerk wooden (DB-4120)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Table Office officer (DB-4119)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Bin Soiled Linen /Side board (FD/E6/MAP/09,FD-241 /371)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Book Shelf open large (DB-4122)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Trestle SR Wooden (DB-4101)

Material and labour for preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying french polish to get the glossy finish on the wooden part of furniture. minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture complete all as specified and directed.

Almirah Large Steel with shelves both side (outside and inside). FD-67,FD-1031

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Almirah Medium Steel with shelves both side(FD-67,350,1032)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Locker Steel both side (FD-1029)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Book case steel both side (FD-1028)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Bed hard steel (FD/E6/MAP/08)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Charpoy IP Hard Top. (FD/MAP-II/01)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Chair CB steel with arms (FD-75M)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Form without back (steel frame only). (FD-78M)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Table Office Officer Steel. (FD-84,FD-1003)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Table Office Clerk Steel (FD-84,FD-1004)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Table 900x600 mm Steel with drawer and without drawer. (FD-1007,1008)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Table Dining OR. (FD-165)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Chair Varandah white colour (FD-359)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Teapoy Verandah (FD-255,383, FD/E6/MAP/17)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Table 900mm x 900mm x 760mm Steel. (FD-1009)

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Trestle SR Iron (FD-86 (M))

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Rack Shoe steel (FD/E6/MAP/02 R

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Chair Visitors S/S (Set of Three) TP

Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as specified and directed.

Sofa set 4/5 seater (FD-272,281, FD/MAP-II/02)

Material and labour for replacement of tapestry cloth cover of cushions of sofa set 4/5 seater and supply & fix new tapestry cloth cover of size 560 x 535 x 100mm thick on existing cushion with valcrow on one edge of best quality. The cost of tapestry cloth to be not less than Rs 250/- per meter.

Material and labour for taking down old unsv cushion seat and supply and fix new foam cushion seat of chair dining officer 40-50 density 75mm thick duly covered with tapestry cloth over the. 12 mm thick plywood Note :- Rate of cushion cloth cover should not be less than Rs. 250 per meter.

CHARPOY DOUBLE BUNK 2 TIER (SH/TD/149)

Material and labour for removing the existing unserviceable ply wood from charpoy double bunk 2 tier and supply & fix 12mm thick plywood, BWR grade, ISI marked alongwith two angle iron stiffeners 900x25x3mm with 08 Nos Nut Bolt complete all as specified and directed. Make : Greenply Industries Ltd (Ply & Board Division) / Kitply / Century / Archidply

Material and labour for removing the old welding spots from broken welding joints and re-welding in the same place as required & denting and straightning of MS Pipes. There after preparation of old surface by sand paper No 50 and wire brush and apply two coat of synthetic enamel paint of exiting colour on complete item all as specified and directed.

CHAIR CB STEEL WITH ARMS (FD-75M)

Material and labour for removing the existing unserviceable/ broken seat for chair CB steel with arms and supply and fix new Seat of size 450 x 390 mm complete with frame made out of 50 X 50 mm 1st class hard wood members duly painted with black paint & canned with 2 mm wide plastic cane of oval shaped & 4 mm wide plastic cane for borders in Godrej pattern complete all as specified and shown on drg including fench polishing to wooden surfaces complete all as specified and directed.

All as per item No 46.01 above but for back of chair CB steel with Arms

Material and labour for removing the existing unserviceable/ broken Arms rest for chair CB steel with arms and supply and fix new Arms rest of size 420 X 50 X 20mm 1st class hard wood duly painted in black colour paint made to complete all as specified & shown on drg including french polishing to exposed surfaces all as directed. (Each Arms rest measured separately)

supply and fix MS plate of size 50mm X 20mm X 4 mm thick duly welded and painted on two seat pipe to support seat of chair CB steel all as specified and directed.

Material and labour for preparation of steel surfaces of chair CB steel with arms and applying two coat of synthetic enamel paint of approved colour complete all as specified and directed.

Chair school with Hand Board (FD/E6/MAP/05)

Material and labour for removing the existing unserviceable openable top & supply & fix 18 mm thick pre-laminated particle Board exterior grade with PVC edging(hinged on RHS) screwed to 25 mm thick hollow pipe inserted in 20 mm thick MS rod welded to frame including welding complete all as shown on drgs.

Material and labour for removing the old welding spots from broken welding joints and re-welding in the same place as required. Preparing old painted steel surfaces of frame & apply one coat of red oxide primer and painting the steel portion with black synthetic enamel paint all as specified and shown on drg.

Material and labour for removing unsv one piece back & seat and supply and fixing of make Blowplast or equivalent all as specified and shown on drg.

Table office officer steel (Drg No. FD -1003)

Taking out unserviceable top from Table and supply and fixnew top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Table office clerk steel. (Drg No. FD-1004)

Taking out unserviceable top from Table and supply and fixnew top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Table of size 900x600 mm with or without drawer. (Drg No. FD-283,284,1007,1008)

Taking out unserviceable top from Table and supply and fixnew top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Teapoy Verandah (Drg No. FD-255,383)

Taking out unserviceable top from Table and supply and fixnew top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Table Peg (FD-277 & 384)

Taking out unserviceable top from Table and supply and fixnew top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Table Centre (FD-274, 267 & 393)

Taking out unserviceable top from Table and supply and fixnew top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Teapoy wooden (FD-278 & 382)

Taking out unserviceable top from Table and supply and fixnew top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Table dining 1200 x 900 mm (FD/MAP-II/03)

Taking out unserviceable top from Table and supply and fixnew top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Table dining 6 person (FD-269, 273 & FD/MAP-II/03)

Taking out unserviceable top from Table and supply and fixnew top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Table dining 8 person (FD-273 & FD/MAP-II/03)

Taking out unserviceable top from Table and supply and fixnew top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Table writing (FD-249 & 275)

Taking out unserviceable top from Table and supply and fixnew top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Repairs to Table Steel

Material and labour for welding all around the broken joints of all type of steel furniture and filling properly at places of welding point throughout to match with the existing as directed. Note: One broken point shall be measured as one point i.e. one unit.

Material and labour for removing old unserviceable lock of drawers of Table office officer steel/ Table office clerk steel and supply and fixnew brass lock with four levers and duplicate keys. (Drg No. FD-1004, 1003)

Material and labour for removing existing drawers of Table office officer steel/ Table office clerk steel/ Table 3' x 2' steel and re-fixing the same after necessary setting of drawers for free movement all as directed. (Drg No. FD-1004, 1003, 1008)

Material and labour for removnig old unserviceable drawer box of Table office clerk steel and supply and fixnew box of three sliding drawers with locking arrangements made out of 1.00mm MS sheet made to shape and sizes shown on drawing all as directed.( FD- 1002,1003,1004)

Material and labour for removing old unserviceable Side box of table writing and supply and fixnew side box consist of drawer and shelf with front door, magnetic catcher, lock, knobs made of 17/18mm thick prelaminated particle board as specified in drg (FD-249,275)

Material and labour for removing old unserviceable channel and supply and fixnew telescopic channel of size 10/12 inch in computer table.(FD/E6/Map/03, FD/E6/Map/15, TP)

Material and labour for taking out unserviceable Key board tray from Computer Table and supply and fixnew Key board sliding tray made up of plastic fixed with L shape patti on all four corners as per trade pattern.(TP FD/E6/Map/03)

Book Case (2 Shelves, Front open) Make : Godrej

Material and labour for removing broken glass from shutters & Supply and fixing new sheet glass of 5mm thick, plain, ordinary glazing of best quality of size 870 X 380 mm all as shown on drawing complete all as specified and as directed. Make: Modi Guard /Saint Gobain/Swastic.

Material and labour for removing unserviceable handle & Supplying and fixing new chromium plated handle 100 mm long as per existing pattern complete all as specified and as directed.

Material and labour for removing unserviceable locks & Supplying and fixing new locks 02 Nos in each Book case with duplicate keys all as per existing complete all as specified and as directed.

Material and labour for preparing the existing steel surfaces by scrapping with sand paper and panting with one coats of synthetic enamel paint blue color on body and off white on the shutters complete all as specified and shown on Drg.

REPAIRS TO CHAIR AUDITORIUM FOLDING HIGH BACK CUSHION SEAT AND BACK FOR VIP

Material and labour for replacement of existing unserviceable arms rest of Chair auditorium long back and supply and fixnew arms rest with PVC cup holderd with support of first class hardwood and covered with 25mm thick foam cushion and flame retardent tapestry cloth of not less than 350/- per meter colour matching with seat and back including nuts and washers of best quality as approved all as specified and directed.

Material and labour for replacement of unsv spring long and supply and fix new spring as per existing pattern all as specified and as directed.

Material and labour for replacement of existing seat cushion and supply and fix new seat PU foam cushion as per existing size duly covered/upholstered/stiched with inner lining foam and mesh polyyster fabric (Inner lining cloth) of flame retardent type tapestry not less than Rs 350/- per RM as shown on drawing and directed.

Material and labour for replacement of existing back cushion and supply and fix new back PU foam cushion as per existing size duly covered/upholstered/stiched with inner lining foam and mesh polyyster fabric (Inner lining cloth) of flame retardent type tapestry not less than Rs 350/- per RM as shown on drawing and directed.

Material and labour for replacement of existing plywood in seat and back and fix new moulded ply BWR Gde below PU cushion as per existing sizes & pattern as directed.

Material and labour for removing the chair auditorium from the existing place , taking down the unserviceable broken angle iron and supply and fixnew angle iron of same size duly welded /drilling one hole of 6mm dia in each piece at top and re-fixing the chair at same place.Complete fixing of chair with fastner 100mm or chemical bolt duly supported by chemical and growted firmly in the floor as directed by Engr-in-Charge. Note :- The work shall be carried out all as per existing provision and shall be fixed at their original location.

supply and fixletheritte cover duly stiched for neck rest of chair. Size, quality and colour as directed.

Complete check including minor repair of chair auditorium and supply and fixnecessary parts i.e. bolts, nuts, screws, fastners, bushes etc to make it completly serviceable.

Chair Moveable computer without Arms

Material and labour for taking out old unserviceable Seat and supply and fixnew seat made of 12mm thick teak ply with poly urethane foam of 50mm thick moulded with density 40 Kgs per cum duly covered with tapestry cloth not less than 250/- per meter of approved colour and shade including black PVC beeding and necessary nut, bolts and washer. All as per drg and directed.

All as per item 68.01 above but back of chair computer. All as per drg and directed.

Material and labour for removing of unsv pedestial base assy of chair computer and S & F of new pedestial assy of 600mm pitch centre dia with castor as per drg and directed.

Material and labour for removing unserviceable hydaulic assy and S & F new hydraulic assy of appropriate size with Black PVC couplings of chair computer complete all as specified and directed.

Material and labour for removing unsv base plate and supply and fixnew base plate of best Quality with screw/nut/bolts. All as per drg and directed

REPAIRS TO MOULDED PU FOAM CUSHIONED PUSH BACK CHAIR UPHOLSTERED WITH FLAME RETARDENT FABRIC PPCP MOULDED ARM

Material and labour for replacement of existing unserviceable arms rest of Chair auditorium long back and supply and fixnew arms rest with PVC cup holderd with support of first class hardwood and covered with 25mm thick foam cushion and flame retardent tapestry cloth of not less than 350/- per meter colour matching with seat and back including nuts and washers of best quality as approved all as specified and directed.

Material and labour for replacement of unsv spring long and supply and fix new spring as per existing pattern all as specified and as directed.

Material and labour for replacement of existing seat cushion and supply and fix new seat PU foam cushion as per existing size duly covered/upholstered/stiched with inner lining foam and mesh polyyster fabric (Inner lining cloth) of flame retardent type tapestry not less than Rs 350/- per RM as shown on drawing and directed.

Material and labour for replacement of existing back cushion and supply and fix new back PU foam cushion as per existing size duly covered/upholstered/stiched with inner lining foam and mesh polyyster fabric (Inner lining cloth) of flame retardent type tapestry not less than Rs 350/- per RM as shown on drawing and directed.

Material and labour for replacement of existing plywood in seat and back and fix new moulded ply BWR Gde below PU cushion as per existing sizes & pattern as directed.

Material and labour for removing the chair auditorium from the existing place , taking down the unserviceable broken angle iron and supply and fixnew angle iron of same size duly welded /drilling one hole of 6mm dia in each piece at top and re-fixing the chair at same place.Complete fixing of chair with fastner 100mm or chemical bolt duly supported by chemical and growted firmly in the floor as directed by Engr-in-Charge. Note :- The work shall be carried out all as per existing provision and shall be fixed at their original location.

supply and fix letheritte/tapestry cover duly stiched for neck rest of chair. Size, quality and colour as directed.

Complete check including minor repair of chair auditorium and supply and fixnecessary parts i.e. bolts, nuts, screws, fastners, bushes etc to make it completly serviceable.

Locker Steel 1830x915x580mm TP

Material and labour for replacement of existing unserviceable handle by providing new Mild Steel chromium plated handle of standard size including nuts and washers of Locker Steel 1830x915x580mm steel best quality as approved all as specified and directed.

supply and fix new 75mm 6 lever lock with two keys set fixed with suitable screws, welding as required for Locker Steel 1830x915x580mm steel incl removing the existing unserviceable lock.

supply and fix new steel cleats for supporting shelves in Locker Steel 1830x915x580mm incl removing the existing unserviceable cleats complete all as directed.

Removing unsv 3 way locking device from Locker Steel 1830x915x580mm and fixing new locking device all as specified

Material and labour for welding by gas welding wherever required complete all as specified and directed. Welding at one point will be measure as one unit

Material and labour for reparation of old painted surfaces of Locker Steel 1830x915x580mm internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even Thereafter applying one coat of red oxide primer and applying two coat synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing.

PVC MOULDED CUSHIONED CHAIRS WITH ARMS TP

Material and labour for removing unsv Seat of chair PVC moulded cushioned and Supply and Fix new Seat 50mm thick polyurethane foam(PU) moulded with density 50-55kg per cubic mtr thick and hardness duly covered with tapesry cloth not less than 250/- per RM all as specified and directed. Upholstry portion to be wrapped with polythene lamination foil.

All as per item 71.01 above but back of chair PVC moulded cushioned

Repairs to Chair revolving executive TP

Material and labour for taking out old unserviceable Seat and supply and fixnew seat complete as per existing shape, pattern, size and design including Base plate of best quality and necessory beading/leaping, nut, bolt and washer/bush complete. The chair shall have a center tilt mechanism with 107 degree min. tilt and tilt tension adjustment, upright locking facility and full 360 degrees swivel mechanism. Note- the poly urethane foam must be 50mm thick moulded with density 40 Kgs per cum duly covered as per existing pattern and directed.

Material and labour for taking out old unserviceable back and supply and fixnew back complete as per existing shape, pattern, size and design including necessory beading/leaping, nut, bolt and washer/bush complete. Note- The back shall be designed with contoured lumbar support for extra comfort duly covered or mesh type as per existing pattern and directed.

Material and labour for removing unsv Hydraulic assy and supply and fixnew hydraulic assy with PVC coupling complete all as directed

Material and labour for removing unsv pedstal base assy and supply and fixnew pedstal base assy steel of five legs with castor wheels all as directed

Material and labour for taking out old unserviceable arm handle of Chair and supply and fixnew pair of arm handles (left and right) with screw, Nut and bolts as per exisiting pattern and size Note: Pair of 2 handles will be counted as one unit.

Repairs to Chair Visitor (TP)

Material and labour for taking out old unserviceable Seat and supply and fixnew seat complete as per existing shape, pattern, size and design of best quality and necessory beading/leaping, nut, bolt and washer/bush complete. Note- the poly urethane foam must be 50mm thick moulded with density 40 Kgs per cum duly covered as per existing pattern and directed.

Material and labour for taking out old unserviceable back and supply and fixnew back complete as per existing shape, pattern, size and design including necessory beading/leaping, nut, bolt and washer/bush complete. Note- The back shall be extra comfort duly covered or mesh type as per existing pattern and directed.

Material and labour for removing unsv cantilever chromium plated frame or leg assy and supply and fixnew cantilever chromium plated frame or leg assy all as directed

Material and labour for taking out old unserviceable arm handle of Chair and supply and fixnew pair of arm handles (left and right) with screw, Nut and bolts as per exisiting pattern and size Note: Pair of 2 handles will be counted as one unit.

Repair to Bench School Child Type 'A'( FD-124)

Material and labour for welding all around the broken joints of all type of steel furniture and filling properly at places of welding point throughout to match with the existing as directed. Note: One broken point shall be measured as one point i.e. one unit.

Material and labour for repairing the wooden box of bench including replacement of broken or deshaped wooden planks complete alll as per drg and directed

Material and labour preparation of wooden surfaces by cleaning, scrapping through sand paper/electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying French polish to get the glossy finish on the wooden part of furniture.

Material and labour preparation of steel surfaces by cleaning, scrapping through sand paper/electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying one coat of synthetic enamel paint of Black/Brown/Grey/OG/White colour over the coat of redoxide paint.

Conversion of Charpoy GI nylon newar into charpoy GI plytop :- Material and labour for replacement of following parts of GI Charpoy pipe with nylon newar all as specified and shown on drawings. Fixing and finishing shall be done in accordance with standard workmanship/ specification and as directed :FD-220(R)

Material and labour for removing the old unserviceable nylon newar from Charpoy GI pipe and tightening of Charpoy frame, check nuts and elbow as required and Supply & fixing of new plytop of size 1980X900x12 mm thick BWR grade by providing 04 Nos of holes 2 on each short rail and ply shall be fixed with 08 Nos of suitable round headed nut bolts and washer as approved in each charpoy through suitable drill machine holes of appropriate size complete all as directed by engineer in charge.

Supply and fix flat iron stiffener under the ply 02 Nos in each charpoy of size 40x5x900mm fitted by nut bolts on long rail duly welded and drilled on both side in equal distance on charpoy GI pipe with appropriate round headed nut and bolts with washer fitted under item 1(i) here in above duly painted black enamel paint complete all as directed. (Note : 02 Nos of flat iron for each charpoy will be counted as one unit).

Removing of old long rail of Charpoy GI Pipe and supply and fix new long rail of 32mm dia GI pipe medium grade duly threaded both sides as required. Note : 1. Old long rail as retrieved shall be used for converting short rail under item No 3 and charges for converting is included in unit rate of item. 2. GI pipe 32 mm shall be arrange by the contractor and pipe shall be ISI marked.

Conversion of long rails of Charpoy GI Pipe (retrieved under item No. 2) into short rail by cutting/finishing to shape and threading and replacing the same as required against unserviceable short rail. Note : Old short rail retrieved shall be used for converting the leg under item No 4 and charges for converting is included in the unit rate of item.

Conversion of short rails (retrieved under item No. 3) into leg rail by cutting/finishing to shape and threading and replacing the same as required against unserviceable short rail.

Removing old elbow from charpoy and supply and fix32mm bore medium grade GI elbow, 3 ways ISI marked complete all as directed.

Removing old check nut from charpoy and supply and fixnew check nut 32mm bore, 6mm thick galvanised iron med gde complete all as directed

Repair To Sofa Set 5 Seater (TP)

Material and labour for taking down old unserviceable leatheritte/upholstry seat, back and supply and fixnew leatheritte/upholstry seat, back with foam cushion of 32-density and spring/straps of approved quality and colour, fully covered, duly stiched including glossy finished polish on exposed wooden portion of sofa set complete all as specified and directed by Engr-in-Charge. Note- 1. Leatheritte/upholstry must be stiched alongwith 1/2 inch foam lining and mesh cloth duly supported by 1 inch layer on seat and back for extra comfort. 2. wooden frame shall be repaired before upholstry work and all items of pasting, nailing and stiching items shall be arranged by contractor. All work to be carried out as per trade pattern.

Material and labour for taking down old u/s sofa leg and supply and fixnew sofa leg of best quality as directed.

RK STEEL FABRICATORs (BID ID -3184891)

VENUS TRADING CORPORATION (BID ID -3183843)

M/S NARAYAN ENTERPRISE (BID ID -3185810)

SWASTIKA ENGINEERS AND AGENCIES (BID ID -3185834)