Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.5 LAccepted-AOC BALSUA P O JHAKOLARI PATHANKOT PATHANKOT PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹37.9 L+₹1.5 L (4.08%)Rejected-AOC DALHOUSIE ROAD BYE PASS CHOWK PATHANKOT 145001 PUNJAB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-AOC Rejected |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
6 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N)Mamun
Garrison Engineer(N)Mamun Pin-145001
ANNUAL COMPREHENSIVE MAINTENANCE TO OTM ACCN AT ZONE D-IB UNDER AGE B/R-II OF GE(N) MAMUN
2023_MES_613397_1
GE(N)/M-37/2023-24
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer(N)Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N)Mamun
₹80,000
3 Oct 2023
11 Aug 2023
8 Sept 2023
11 Aug 2023
6 Sept 2023
25 Aug 2023
Amount
Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.
M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 in two layers (10+5mm) on brick masonary of brick work surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, chajja etc, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed.
M&L for preparing new plastered surface of wall and appying two coats of cement base paint mixed with silicon based water repellent compound over a coat of primer by roller/brush complete all as specified and directed.
M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.
S&F 5.50mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.
S&F pressed steel frames for doors/windows of size 125x60mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.
S&F pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc (divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded, fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge. Size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified & directed.
S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated complete all as specified & directed.
S&F Factory Made Solid PVC Moulded door Shutter with solid PVC Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F Solid PVC Door Frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed.
S & F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.
Mild steel barrel tower bolts stove enameled black with bright bolts of length 150mm all as spd ISI Marked complete all as specified and directed.
S&F continuos (piano) hinges, mild steel, bright finish or elcetrogalvanised size of flap 30 mm complete all as specified and directed.
S&F 100mm hasp and staples, safety type of alum anodised complete all as specified and directed.
Mild steel pressed handle oval type stove enameled black of size 150mm complete all as specified and directed.
S&F Mild steel sliding door bolts (ISI Marked) 250mm long, stove enameled black, with bright bolt not less than 12mm dia with & incl a minimum of 6 bolts & nuts, four on sliding and two on staple plate complete all as specified and directed.
S&F 150 mm MS helical door spring for door closer, complete all as specified and directed.
M&L for preparation of new or previously untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed ot welded incl 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to F I frame work , incl other fittings ,hinges ,handles tarred hold fasts PCC blocks. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.
M&L for Providing and fixing Eco 3000 Series Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.60 mm. Paint Specifications: Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Dimensions of Sections: Section for frame should be 48mm x 50mm, Section for Mullion should be of 48mm x 50mm, Section for Glazed Shutter Frame should be of 47mm x 20mm, and Section for Fixed Glass Bead should be of 12mm x 12mm.Fixing Details: Frame and Shutter Frame Sections should be cut to length and metre joined with Polypropylene Corner Brackets. Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter. Windows shall be provided with Grill made of 10mm sq. MS Bars welded to at 150mm center-to-center, 6mm x 12mm MS flat. Total grill unit shall be powder coated and fixed to window frame with screws. Note: Quoated rate shall include all glass and grill.
M&L for Eco 4000 Series Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.60 mm. Coated Sections shall be with Primer Coat of Epoxy Primer of 5-7microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Section for frame shall be 48mm x 50mm, Section for Mullion shall be of 48mm x 50mm, Section for Glazed Shutter Frame shall be of 47mm x 20mm, and Section for Fixed Glass Bead shall be of 12mm x 12mm. Frame and Shutter Frame Sections shall be cut to length and metre joined with Polypropylene Corner Brackets. Mullion Section shall be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket shall be used all around glass in shutter. Each Glazed Shutter shall be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay. Window Frame shall be fixed to brick/concrete masonry by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frames. Glass shutter & Fixed Glass portions shall be provided with a glass of 5 mm Plain Float Glass. Windows shall be provided with Grill made of 10mm sq. MS Bars welded to at 150mm center-to-center, 6mm x 12mm MS flat. Total grill unit shall be powder coated and fixed to window frame with screws. Mesh Shutter shall be provided with a Stainless Steel 32 gauge Fly mesh of 304 grade with 144 holes per square Inch complete all as specified and directed. Note: Quoted rate shall deemed to be including rates of Glass, wire mesh and grill.
Hacking out old broken glass ( any thickness , size, quality, or description) from wooden / steel frame glazed with putty or fixed with beads, rubbish off the premises complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.
All as per item 33 but glass pin head type
S&F in repair Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.
Dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing) and rubish off the premises complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed .
M&L for vitrified tiles 8-10 mm thick ( Square or rectangular) polished, double charged area of each tile not exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for vitrified tiles 8-10 mm thick ( Square or rectangular) polished,double charged area of each tile not exceeding 0.36 sqm in daddo, skirting and like that set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 10mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.
Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.
Fixing only the 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling etc complete all as specified and directed.
S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.
Fixing only the 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling etc complete all as specified and directed.
S&F Ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20mm bore iron pipe and fixed (minimum weight 20mm -210 gms) fixed in reapirs complete all as specified and directed.
S&F in repair Bib taps cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair angle valve / stop valve cast copper alloy chromium plated fancy type ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair concealed type angle valve / stop valve cast copper chromium plated fancy type alloy with long shank and cup ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore complete complete all as specified and directed.
S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S&F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia waste pipe complete all as specified and directed.
S&F in repair 15mm bore dia pillar tap cast copper alloy chromium plated screwed down, high pressure screwed for iron pipe complete all specified and directed .
S & F in repair PVC waste pipe 32 mm dia for wash hand basin and urinal complete all specified and directed .
S & F in repair PVC connection 15 mm size with PTMT nuts or length 450 mm complete all specified and directed .
S&F in repair grating 100 mm dia of PTMT. (Minimium weight 25gms) complete all as specified and directed.
S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.
S & F Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe including plastec seat and cover ( As directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) and removal of rubbish not exc 50m complete all as specified and directed.
M&L for PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.
M&L for green Marble work 15-16 mm thick (table rubbed and polished) in cooking plateform, window cill, steps, stair case trade & riser etc in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra complete all as specified and directed.
Dismantling water tank of capacity exceeding 250 litres but not exceeding 500 litres and removing to stores, complete all as specified and directed.
Dismantling water tank of capacity exceeding 500 litres but not exceeding 1000 litres and removing to stores, complete all as specified and directed.
M&L for Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) two layers, Capacity 500 litres, ISI Marked including all accessories, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old tank complete all as specified and directed..
All as per item 65 but Capacity 1000 litres.
S&F in repairs 20mm bore Ball brass valves, high pressure with polythene float and flynut complete, screwed down for iron pipe fixed, complete all as specified and directed.
S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore.
Supply only liquid water proofing compound
M&L for PCC 1:2:4 type B-0 ( using 12.5mm graded stone aggregate) padding as roof , surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for cement concrete (1:2:4) type B1 ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified & directed.
M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction or @ 0.200 ltr in 50 Kg of cement complete all as specified & directed. (WPC shall be measured and paid for separetaly)
M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet walls to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP having a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end overlap of membrane. (d) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane/ directed by Engr-in-charge.
All as per item No. 73 but on Accessible roof without applying solar reflective bituminous aluminum paint complete all as specified and directed.
S&F 100mm bore Cast iron soil, waste and vent pipes (sand cast) in any length with or without ears with cement joints fixed to walls with all fittings including taking down the unservicable pipe with fitting complete all as specified and directed.
All as per item No. 75 but 75mm bore pipe.
S&F Cast iron branch piece single of 100mm bore or with parallel branches fixed in repaircomplete all as specified and directed.
S&F Cast iron branch pipece single of 75mm bore or with parallel branches fixed in repair complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, rubbish off the premises complete all as specified and directed
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
All as per item 80 but 6mm to 8mm dia bars.
M&L for reinforced cement concrete 1:2:4 type B-0 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work for rough finished surface complete all as specified.
M&L Granite ( including demolition of old stone/ tiles) work 15mm thick (table rubbed and polished) in steps, jambs, pillars, steps, window cills,cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of granite
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers , PVC waste pipe fixed in repair including waste copling ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as spd & directed.
Taking down shutters of any description n exc 1 Sqm each and removal complete all as specified and directed.
M&L for 18/19 mm thick block Board, grade 2 quality interior grade, commercial type, outer edge locked with 6mm thick wooden fillets of 2nd class hard wood, fixed with screws to timber frame work complete all as specified and directed.
S&F in repair vitreous china, squatting from Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including provision of lean concrete bedding connection to drain out pipe and to flush pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required complete all as specified & directed.
S&F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats ( min wt 190 gms) complete all as specified & directed.
M&L 2nd class hard ( wood wrought all sides ) Small fittings such as brackets of any type ( wood wrought all sides), latch and hinge blocks, shaped door and window stops and the like incl all necessary labours articles n exc 200 Cu.cm each complete all as specified & directed.
S&F in repair towel rail CP 600 mm long 15mm dia pipe of 1mm thick (as per sample) complete all as specified and directed.
S & F swivel shower of PTMT any colour for fixing with 15mm pipe ( Minimum weight 40 gms) (fixed in repairs) complete all as specified and directed.
S&F in repair grating 100 mm dia of PTMT. (Minimium weight 25gms) complete all as specified and directed.
S & F PVC shelf of PTMT fixed with and incl chromium plated brass screws and wooden and plastic cleats ( min wt 300 gms) complete all as specified and directed.
S&F in repair over head shower 125mm size for 15mm bore pipe, cast copper alloy chromium plated fixed in repairs complete all as specified and directed. Make - Jaquar , Marc and Johnson
S&F in repair stainless steel kitchen plate rack of size 750 x 900 mm of approved make (as per sample) fixed with mild steel screws complete all as specified and directed.
Dismantling brick tile or terracing tiles single layer on roof, removal of rubbish not exc 50m complete all as specified and directed.
M&L for brick tiles laid on cement mortar in CM 1:4 and joints grouted and flush pointed in CM(1:3) and mixed with 5 % of crude oil by wt. of cement complete all as specified and directed.
All as per item 97 but except brick tiles.
Taking down eaves gutters and rainwater pipes 100 mm bore (any size or pattern), including all fittings, head, shoes, bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and directed.
S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls complete all as specified and directed.
S&F PVC (SWR) bend any radius 110mm dia bore complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.
S&F Pre-painted galvalume aluminum (zinc coating275) GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
All as per item 103 but Plain sheet 0.50mm.
M&L for false ceiling of 7 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.
S&F in repair 20mm bore Curtain rods anodised aluminium alloy (as per sample) with bracket, end bulbs, fancy type, fixed in position complete all as specified and directed.
M&L for Machine cut kota stone flooring 18-20mm thick over 20mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor, rubbing and mirror polishing complete all as specified and directed.
All as per item 107 but in riser, skirting, dado and pillar laid over 10 mm thick bedding layer of mortar in CM 1:4.
Deduct : Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs. 90,450.00 to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.
WALIA ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .