REPAIR AND MAINTENANCE OF WATER SUPPLY INSTALLATIONS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: GE (AF) HAKIMPET

Contract No: GE/AF/HKPT/ OF 2025-2026 (8864/E8) SERIAL PAGE NO.

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT TOTAL AMOUNT In Words

1 Note : 1. The contractor should visit the site before quoting the tender to know the working condition of the station. 2. All requisite safely measures are to be adopted by contractor on site. 3. The contractor shall provide and deploy sufficient manpower (as approved by GE / Engineer in charge) shall report at 9:00 hrs to JE E/M / Engineer in Charge to collect the complaints job card in working days and complete the same completed within 24 Hrs. 4. The complaints shall be rectified within 24 Hrs if the complaints is/are not attended / not completed within 24 Hrs (Except repair/replacement of major items) recovery will be done at Rs 500 per complaint per day. 5. After completion of job work complaint, the contractor has to produce job card duly signed by user & JE / Engineer in Charge. 6. If contractor failed to provide their electrician to attend the complains then recovery will be done at Rs 1000 per day. 7. The contractor should procure minimum 50% of the materials for all items as per BOQ (Other than paints) mentioned in this CA, within 20 days after getting sample approval and kept in safe custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of work. If contractor fail to complete the work within contract due to lack of fittings a penalty of 20% shall be applicable on quoted rates by the contractor. 8. In repair works, rate quoted for demolition /dismantling /taking down is deemed to be inclusive of removing the same from site and station. 9. In maintenance works, the contractor should maintain separate registers for repair works. Day to day complaints should be noted in those registers with SI nos of complaints, location qty of work, status of complaints and signature of in charge and stamp of the office. Formal will be given from concern AGE office. The contractor should obtain the signature of in charge on the same day of work. These register to be submitted to JE (E/M) on every weekend without fail. 10. The contracts involving working at elevated locations of buildings, contractor should ensure proper safety arrangements as per norms. Wearing safety belts and helmets are mandatory. A penalty of Rs 1000 per day will be recovered from contractor if safety norms are not followed. 11. The plumbing complaints resulting wastage of water should be rectified within 12 working hours and if contractor fail to fulfill this, a recovery of 10% of rate quoted for relevant item will be charged from contractor in this regard. 12. After completion of work, no stores/debris/ loose items be kept at work site or dumped inside station . Entire area to be cleared and waste material be taken outside from the station . 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

2 Disconnecting the pipe lines and electric connections of centrifugal pump set of following capacity and removing it from its position carefully and transporting to the work shop and refixing the same in its original position after overhauling complete all as directed , and making electric connection and testing complete to entire satisfaction of Engr-in-charge Note : (i) The spares required for repairing the pump sets and rewinding of motor will be measured and paid separately under respective item. Other minor spares are deemed to be included in the quoted rate. (ii) Expendable stores like cotton waste/cleaning materials lubricants , gland packing metal filling , machining and transportation from site to workshop and back are deemed to be included in rate quoted. 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

2.01 (a) Centrifugal monoblock pump set up to 10 HP capacity 1 Supply and fixing of Galvanized iron mill finish GI wire mesh, 20Gauge (0.88mm thick) woven to opening size not more than 3/8 inch, square shape holes, woven for security cages for sumps and overhead tanks complete all as specified and directed by the Engineer-in-charge Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

2.02 (b) Centrifugal monoblock pump set above 10 HP and up to 30 HP capacity 2 Supply and fixing of Galvanized iron mill finish GI wire mesh, 20Gauge (0.88mm thick) woven to opening size not more than 3/8 inch, square shape holes, woven for security cages for sumps and overhead tanks complete all as specified and directed by the Engineer-in-charge Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

3 M & L for rewinding of centrifugal motor with super enameled copper conductor of F class insulation and same guage weight and turns to achieve its full efficiency including replacement of bushes tying the windings and connecting the coils and bringing the connections as that of exisitng complete all as specified and as directed by Engineer in charge. 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

3.01 (a) Centrifugal monoblock pump set 7.5HP 1 Supply and fixing of Galvanized iron mill finish GI wire mesh, 20Gauge (0.88mm thick) woven to opening size not more than 3/8 inch, square shape holes, woven for security cages for sumps and overhead tanks complete all as specified and directed by the Engineer-in-charge Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

3.02 (b) Centrifugal monoblock pump set 20 HP 1 Supply and fixing of Galvanized iron mill finish GI wire mesh, 20Gauge (0.88mm thick) woven to opening size not more than 3/8 inch, square shape holes, woven for security cages for sumps and overhead tanks complete all as specified and directed by the Engineer-in-charge Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

3.03 (c) Centrifugal monoblock pump set 30 HP 1 Supply and fixing of Galvanized iron mill finish GI wire mesh, 20Gauge (0.88mm thick) woven to opening size not more than 3/8 inch, square shape holes, woven for security cages for sumps and overhead tanks complete all as specified and directed by the Engineer-in-charge Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

4 Supply, fixing and commissioning of LT Panel outdoor type CPRI approved fabricated with 3.15 mm CRCA sheet with anti corrosion cubical enclosure suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 3 mm thick machine pressed and angle iron frame 50mm x 50mmx 6mm grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters on both side complete all as specified and directed for following specifications :- (a) Fully Automatic star delta starter for 7.5 HP capacity three phase submersible pump (b) Motor protection circuit breaker of capacity 7.5 HP (c) Digital ammeter and Voltmeter (d) LED type indicating lamps 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

4.01 (a) Ball bearing drive 1 Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

4.02 (b) Ball bearing non drive 1 Each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

4.03 (c) Terminal 1 Each Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

4.04 (d) Fan 1 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

4.05 (e) CI Impeller 1 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

4.06 (f) Oil Seal 1 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

4.07 (g) Gland cover 2 Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

4.08 (h) MS pump shaft brazing 1 Each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

5 M&L for Brickwork with flyash bricks , straight or curved on plain exc 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

5.01 (a) Roller Bearing 3 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

5.02 (b) Ball bearing non drive for motor Each Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

5.03 (c) Terminal Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

5.04 (d) Fan Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

5.05 (e) CI Impeller Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

5.06 (f) Oil Seal Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

5.07 (g) Gland cover 6 Each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

5.08 (h) MS pump shaft brazing 2 Each Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

6 Name of Work: REPAIR AND MAINTENANCE OF WATER SUPPLY INSTALLATIONS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

6.01 Taking down/Dismantling the existing unserviceable spares, supply and fix for the folllowing spares suitable for submersible/ centrifugal/ monoblock pump set panel of various capacity . 2 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6.02 (a) Digital Voltmeter 0 to 500 Volts make - Meco / AE / L&T 2 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6.03 © Multi function meter 1 Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

6.04 (b) Digital Ammeter 0-50 Amps with CTS and selector switch Meco/ AE/ L&T 2 Job Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6.05 (e) Fully Automatic Star Delta starter with Dry run trip, Single phasing and Phase reversal protection , CT coils and relays suitable for above 5HP upto 10 HP capacity. Make - Havells/L&T/ Crompton Greaves 1 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6.06 (g) DOL starter up to 7.5HP Capacity. Complete all as specified and directed. Make - Havells/ L&T/ Siemens 1 Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

6.07 (h) Single phase Preventor Make - minilac or equivalent to L&T, C & S, HPL 1 Each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

6.08 (i) Timer switch- Make - L&T, C & S, HPL 1 Each Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

6.09 (j) Fully Automatic Star Delta starter with, Single phasing and Phase reversal protection , CT coils and relays suitable for 20 HP capacity. Make - Havells/L&T/ Crompton Greaves 1 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6.1 (k) Fully Automatic Star Delta starter with, Single phasing and Phase reversal protection , CT coils and relays suitable for 30 HP capacity. Make - Havells/L&T/ Crompton Greaves 2 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6.11 (l) Over load relay switch complete all as specified and directed. Make - L&T/Siemens/C&S. 2 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6.12 (m) DOL Starter coil up to 7.5HP capacity. Complete all as specified and directed.Make - L&T/Siemens/C&S. 2 Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

6.13 (n) Push button suitable for control panels (Reg & Green) complete all as per direction of Engr-in-charge. Make:- Siemens/Legrand/L&T 3 Each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

7 Supply, install, testing and commissioning of Digital water level indicator with magnetic float sensors including 8core cable, PVC water pipes and coupling, HDPE pipe, excavation charges, service charges, dismantling of old existing mechanical type water indicators and handing over in MES Water supply store and making good the disturbed surface to match the existing surface complete all as specified and directed by the Engineer-in-charge. Note: a) The cable used shall be made underground and should be properly clamped onto the Overhead tank all along its length. No hanging/loose cable is permitted. b) The water level indicator shall be installed at place as decided by the Engineer-in-charge. Cables should be run inPVC conduit not less than 20mm dia on walls/floors/roof with proper clamping 8 Each Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

8 Supply and fixing in replacement 20mm Non-return valve, bronze body, screwed end complete all as specified and directed by the Engineer-in-charge 10 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

9 Supply and fixing in replacement 25mm Non-return valve, bronze body, screwed end complete all as specified and directed by the Engineer-in-charge 8 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

10 Supply and fixing in replacement 32mm Non-return valve, bronze body, screwed end complete all as specified and directed by the Engineer-in-charge 2 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

11 (d) Indicating lamp (set of 3 ) make - HPL/Siemens /CG or equivalent 10 Set Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

12 Supply and laying in replacement of DI pipe 150mm spigot and socket ends class 'K-7', ISI marked suitable in replacement of CI Pipes for tyton joint with inside cement mortar lining and external black bitumen coating of any length properly laid in air all as specified and directed by Engr-In-Charge:-Make - Srikalahasti/Electrosteel/Kesoram/TISCO 85 RM Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

13 Scaffolding for overhead water tank upto 14m height , any type, including all accessories and safety measures for fall protection, hand rails complete all as specified and directed by the Engineer-in-charge 1 Each job Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

14 Labour charges only for welding of pipelines/ making hole and making good the disturbed surface of pipeline of any size and material all as specified and directed by the Engineer in charge 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

14.01 (a ) 80 mm dia pipe 3 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

14.02 (b ) 100 mm dia pipe 3 Each Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

14.03 (c) 150 mm dia pipe 5 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

15 Supply only for fixing Sluice Valve spindle with check nut (High tension Brass) for the following sizes:- 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

15.01 (a) 150mm dia 2 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

15.02 (b) 100mm dia 2 Each Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

15.03 (c) 80mm dia 2 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

16 Supply and fix DI sluice valve complete with iron wheel head , bronze body seat ring, stainless steel non-rising spindle and check nut , including jointing material such as rubber insertion nut bolts washers gas kit etc ISI marked, PN 1.6, conforming to IS 14846 including taking down old existing unserviceable valve and making good arrangement for safe working complete of following size 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

16.01 (a ) 80 mm dia pipe 1 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

16.02 (b ) 100 mm dia pipe 1 Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

16.03 (c ) 150 mm dia pipe 1 Each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

17 Taking down unserviceable NRV of any description and Supply and fix DI Non - Return Valves PN 1.6, ISI marked , heavy duty , flanged type with over 250 microns epoxy coating complete all as specified and directed for the following sizes. Make - Kirloskar/Kartar/Leader 1 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

18 Supply and fix in replacement Air Release Valve 100 mm dia PN 1.6 with double chamber conforming to IS - 14845 including all connecting items etc complete,of following size : Make - Durga/Venus/Leader/Kirloskar 2 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

19 Supply and fix CI or DI fittings for spigot socketed pipe such as bends ( any type , radius and angle ) tapers any type , (straight , bend increasing , decreasing or double socket etc ) tee pieces single branch , Y junction double branch , of size - up to 300 mm dia all as specified and directed. 200 Per day Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

20 Taking down unserviceable Foot Valve of any description and Supply and fix Foot valves ISI marked of cast iron 50mm with brass diaphragm heavy duty screwing type including pumping out water from UG sump upto 2feet complete of the following sizes .Make-Kirloskar/Kartar/Leader 5 Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

21 Supply and fixing Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), triple layered, ISI marked of capacity 500 litres hoisted and fixed in position, including connecting inlet an doutlet pipes and taking down old unserviceable water tank wth fixtures complete all as specified and directed by Engr-in-charge. Make : Sintex / Plasto/ Ashirvad 100 Each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

22 Supply and fixing in repairs 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type and chromium plated complete all as specified and directed by the Engineer-in-charge 30 Each Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

23 Supply and spraying of Roundup herbicide-Glyphosate 41% SL weed killer complete all as specified and directed by the Engineer-in-charge 30 Kg Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

24 Supply only bleaching powder to use as water disinfectant, unscented, 500g complete all as specified and directed 10 LTR Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

25 Supply only alum stone for water treatment complete all as specified and directed 10 Pack 0f 500g Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

26 Supply and fixing of HDPE (High density polythene) pipe, PE-63 grade, ISI marked, as per IS 4984, PN 10, size 3 inch, Outer dia 50 mm, 10 Kg/cm2, suitable for borewells including providing SS nipples (03 Nos) of suitable size flanged type for borewell complete all as specified and directed. 100 RM Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

27 Supply and fixing of HDPE (High density polythene) pipe, PE-63 grade, ISI marked, as per IS 4984, PN 10, Outer dia 63 mm, 10 Kg/cm2, suitable for borewells including providing SS nipples (03 Nos) of suitable size flanged type for borewell complete all as specified and directed. 100 RM Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

28 Supply, Install, Testing and commissioning of Water meter, Cast Iron, Bulk Woltman type, suitable upto 50 deg C, Class B, Removal mechanism type, magnetically coupled, having dry dial, hermetically sealed Totalizer conforming to ISO 4064, F/E connection, 50NB Flanged end complete all as specified and directed by the Engineer-in-charge 1 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

29 Supply, Install, Testing and commissioning of Water meter, brass, Bulk Woltman type, suitable upto 50 deg C, Class B, Removal mechanism type, magnetically coupled, having dry dial, hermetically sealed Totalizer conforming to ISO 4064, F/E connection, 1" size threaded end complete all as specified and directed by the Engineer-in-charge 1 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

30 Supply and fix PVC in replacement water tank cover made from high quality UV stabilized material to match the existing PVC water tank of capacity ranging from 500 litres to 5000 litres and secure with hinges/threads, colour to match existing tank fixed at any location including taking down old unserviceable cover complete :- Make: Sintex/Plasto/ Ashirvad 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

30.01 (a) 25 mm dia pipe 150 RM Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

30.02 (b) 50 mm dia pipe 500 RM Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

30.03 © 80mm dia pipe 150 RM Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

31 Supply and Lay in replacement for MS water tubing " Medium Grade" in accordance with IS 1239:latest with all fittings laid in trenches for following sizescomplete all as specified and directed.Make - Jindal/Tata/Zenith 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

31.01 (a) 150 mm dia pipe 50 RM Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

31.02 (b) 100 mm dia pipe 70 RM Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

31.03 © 80mm dia pipe 80 RM Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

32 Cutting chases, pinning in any any kind of walls or slabs making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed by the Engineer-in-charge 50 RM Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

33 Supply only Heavy Duty 3.0mm Steel Wire Trimmer Line Rope Cord for Brush Cutter/Strimmer, bundle of 50M – Square & Round Shape, Grey – Nylon Coated, Durable, Low Noise suitable for any kind of grass cutting machine complete all as specified and directed by the Engineer-in-charge 2 Pack 0f 100g Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

34 S&F in replacement Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including cutting/welding to suitable/desired strength complete all as sepcified and directed 250 Each bundle of 50RM Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

35 Supply and Lay in replacement for Galvanized Iron water tubing " Medium Grade" in accordance with IS 1 Set Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

36 1239:latest with all fittings laid in trenches for following sizes including necessary cutting and packing of slab or wall and making good the disturbed surface of floor/wall to match the existing surface complete all as specified and directed.Make - Jindal/Tata/Zenith 1 Set Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

37 Supply and fixing of PVC sticker, water proof, self-adhesive, micro laminated, premium quality digital print, rectangular shape, 5.5x5.5 inch with Do's and Don’t's for usage of electric geysers printed on the sticker complete all as speciifed and directed by the Engineer-in-charge 200 Each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

38 Supply & fixing acrylic display board with vinyl eco solvent printing, fitting with studs/spacers & fittings on wall for showing details/ Schematic diagram of OH tank/UG sumps/Headers/Pumps/Pipeline connections of water supply installation with 3mm diffused LED lamps of different colours for different pipes along with type of material used, size and length duly printed in English alphabet as provided by Engineer -in-charge made out of PVC sheet of size not less than1.5 mtrX1 mtr including Aluminium frame and cover to the frame complete including site survey all as specified and as directed by Engineer-in-charge. Note: The contractor shall obtain approval of the diagram before placing order for the same. Charges for excavation related to site survey will be paid under relevant intem of this schedule 3 Each Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

39 Supply & fixing acrylic display board on ground for showing details of borewell like Capacity of pump, suction, delivery pipe materials and sizes, area of delivery, yield duly printed in English alphabet of size not less than 100mm dia height and 20mm dia width as provided by Engineer -in-charge made out of PVC sheet of size 1.5 mtrX1 mtr including GI angle frame and GI sheet cover to the frame and necessary concreting for fixing the pipe on ground complete all as specified and as directed by Engineer-in-charge. 20 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

40 Supply & fixing acrylic display board wall mounted for showing technical specification of pumps, duly printed in English alphabet of size not less than 100mm dia height and 20mm dia widthas provided by Engineer -in-charge made out of PVC sheet of size 1.5 mtrX1 mtr including Aluminium angle frame and Aluminium sheet cover to the frame and necessary concreting for fixing on wall and making good the disturbed surface to match the existing surface complete all as specified and as directed by Engineer-in-charge. 10 Each Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

41 Material and labour for in-situ calibration of 300mm ultrasonic Water meter using Master meters/portable calibrators/flow provers through technicians from NABL accredited laboratories inclusinf submissio of test report complete all as sepcified and directed by the Engineer-in-charge 80 Set Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

42 Material & labour for earthing in repair with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire of 32X6 mmas earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe light grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PC 5 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

43 C (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 2009 complete all as specified and as directed by Engineer-in-charge. 10 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

44 Supply and fixing of Earth pit display boards made of UV based fibre glass possible to be relocated with necessary mounting arrangement, rectangle shape with rounded edges, displaying Earth pit No, Equipment connected to, Tested date, ohmic value and due date 4 Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

45 Supplying and laying in replacement synthetic rubber insulated mat 2 mm thick for voltage upto 3.3 KV for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m., ISI marked, laid in front of the LT panel complete all as specified and as directed. 150 KG Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

46 Material and labour for in-situ calibration of 200mm Mechanical Water meter using Master meters/Gravimetric/volumetric method through technicians from NABL accredited laboratories including submissio of test report complete all as sepcified and directed by the Engineer-in-charge 130 KG Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

47 Excavation in trenches not exc 1.5 wide and not exc 1.5 mtr deep and getting out in hard /dense soil for laying pipes complete all as specified . 70 KG Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

48 Removal of excavated material to a distance not exc 50 mtr away from starting point and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed . 12 RM Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

49 Material and labour for cutting of road / hard standing not exc . 1.5 mtr wide and not exc. 1.5 mtr deep for laying and taking out water pipe line including making good the disturbed portion as per existing earlier complete all as specified and directed . 120 Each bundle of 50RM Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

50 S&F MS sheet cover for valve chambers using angle iron 40 x40 x6 mm as a frame embedded in concrete and 6 mm thick MS sheet as in cover with necessary locking arrangements and lifting handles duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. The rate shall include taking measurements to suit the existing valve chamber. 50 Each bundle of 50RM Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

51 S&F MS sheet cover for overhead water tanks using angle iron 40 x40 x6 mm as a frame embedded in concrete and 6 mm thick MS sheet as in cover with necessary locking arrangements and lifting handles duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. The rate shall include taking measurements to suit the existing valve chamber. 3 Each Job Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

52 Material & labour brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 90 x90 cm x 6mm duly painted with two coats of synthetic enameled paint over a red oxide primer including locking arrangement, brick work and all inner suraces of pit and exposed portion of out side shal be plastered in cement motor (1:4) complete all as specified and directed. Per day Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

53 Supply only Calcium based Chlorine granules disinfectant for water treatment in 45 kg plastic drums having concentration of chlorine 60% to 70% complete all as specified and directed. Make : All Makes approved by E-in-C Branch. 300 RM Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

54 Supply and laying of Silicone tube, food grade and non-toxic, transparent and flexible, heat resistant, 0.5 inch inclding connecting the same to dosing pump complete all as specified and directed by the Engineer-in-charge 3 Each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

55 Measurement of proper earth resistance in presence of user, recording the values in Earth resistance test register, obtaining signature from user at locations and as per timelines prescibed by Engineer-incharge. Note: The necessary T&P shall be provided by the contractor to the person carrying out the job. 8500 Cum Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

56 Returning, filling in soils , including spreading ,levelling ,watering and well ramming in layers not exc 25 cm thick complete all as specified and directed . 24 Set Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

57 M&L for cleaning of pumphouses, borewell and sump areas including cutting down branches, clearing of fallen trees parts, cleaning all rooms, top of U/G sumps, rooms of O/H reservoirs, taking out all waste/debris out of the AFS complete all as specified and directed. Note: Necessary safety equipment shall be provided by the contractor . The work shall be executed as per schedule for individual areas as per the schedule given by Engineer-in-charge 2 Set Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

58 Supply and fixing of First Aid Box Kit, fully equipped with medicines and items, Red colour, class B(suitable for 25 to 50 persons), mountable, made from galvanized metal with 7way processed powder coating, as per Factories Act 1948, contents shall be as per WHO guidelines and GMP certified all as specified and directed. 50 SFT Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

59 Material and labour for painting of existing LT panels in pumphouses with two coats of super enamel paint of approved colour after preparing the surface and writing English alphabet in size not less than 450mm height and 20mm width complete all as specified and directed 3 Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

60 Supply only Ortho Tolidine solution of 500ml for testing of dissolved chlorine in water complete all as specified and directed 20 SFT Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

61 Testing of water sample for potability collected from different pumphouses by Govt NABL Laboratory and submission of test reports, parameters to be tested as per IS 10500: latest, Turbidity, temperature, colour, taste and odour, pH, acidity, alkalinity, hardness, iron, chlorides, Free residual chlorine, calcium, magnesium, dissolved oxygen,TDS, TSS,sulphates, nitrates, Fluoride, Manganese,bacteriological analysis for TBC, Coliform, E.Coli complete all as directed by Engineer-in-charge. Note: a) The price shall include collection of sample in quantity and medium as mentioned in IS 3025. b) NABL accreditation certificate of the laboratory testing the sample shall be submitted before sampling. 1 Each Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

62 Testing of water sample for parameters concerning toxic substances as per Table 3 of IS 10500:2012, samples collected from locations prescribed by Engineer in charge, testing to be carried out at Govt NABL Laboratory complete all as directed by Engineer-in-charge Note: a) The price shall include collection of sample in quantity and medium as mentioned in IS 3025/relevant ASTM. b) NABL accreditation certificate of the laboratory testing the sample shall be submitted before sampling. 1 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

63 Supply, fixing and commissioning of LT Panel outdoor type CPRI approved in replacement fabricated with 3.15 mm CRCA sheet with anti corrosion cubical enclosure of size (800x900x350)mm 415 volts, AC 50 Hz fabricated of CRCA sheet 3 mm thick machine pressed and angle iron frame 50mm x 50mmx 6mm grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters on both side complete all as specified and directed by Engineer-in-charge for following specifications :- (a) DOL starter for 3 HP capacity three phase submersible pump (b) Motor protection circuit breaker of capacity 3 HP (c) Digital ammeter and Voltmeter (d) LED type indicating lamps 5 SQM Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

64 M&L for painting to exposed pipes of any type and dia pertaining to water supply installations and connected valves and fittings after cleaning, scrapping and making the surfaces free from rust and painting with 2 coats of synthetic enamelled paint of approved colour including marking/writing complete all as specified and directed 13 RM Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

65 Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mps working pressure etc complete in all respect as specified specified and as directed by Engr-in-charge. 10 Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

66 Supply of Operating T-rods for sluice valves of any size 3mtr length including necessary fabrication, welding complete all as specified and directed by the Engineer-in-charge 5 SFT Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words