Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
9 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE Amritsar
GARRISON ENGINEER AMRITSAR CANTT. PIN - 143001
SPL REPAIRS BLDG NO. P-27 (OT) AND ROOF TREATMENT ON OTM BLDGS (P-56, P-57, P-32 AND P-34) AT MH AND PROVN OF WASTE PAPER BURNING INCINERATOR IN PREMISES OF 870 FD WKSP AT OLD AMRITSAR CANTT
2026_MES_799739_1
GE/ASR-89/2026-27
Open Tender
Civil Works
Item Rate
240 days
GE AMRITSAR
AS PER NIT
8 documents required · 8 mandatory
₹500
GE Amritsar
₹92,000
Yes
20 Nov 2026
20 Nov 2026
16 Dec 2026
20 Nov 2026
9 Dec 2026
4 Dec 2026
20 Nov 2026 - 27 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Material and labour for preparation of existing surface and cleaning it off loose and tenable by mechanical means, filling the crack in brick tile joints with filler and PU sealent and providing 15mm thick plastering in cement mortar 1:3 with proper slope towards the spouts/drain pipe finishing even and smooth including WPC@2% by weight of cement as per manufacturer's instruction, applied over prepared surfaces including dismantling complete all as specified and directed by Engineer-in-charge. | 2,135 | SQM | 100 | ₹2,13,500 |
| 2 | Material and labour for water proofing treatment to roof/terrace surface (material of water proof treatment as approved by AO) Single component, acrylic based, flexible, micro fibre reinforced water proofing and heat reflective coating system, the treatment shall be carried out as per the manufacturer's instructions and shall include the following :-
(a) Application of primer coat @ 0.2 to 0.3 kg /Sqm followed by the first coat @0.75 kg/Sqm after dust free and moist the surface
(b) The second coat shall be applied @0.75 Kg/Sqm and reinforced with fabric re-inforcement between the first coat and second coat
(c) The top and third coat shall be applied after the second coat dries off @0.05-0.08 kg per Sqm (d) The whole roof/terrace so finished shall be flooded with water for a minimum period of 24hrs for curing and for final test.
(e) The material shall adhere to following specifications :-
TECHNICAL SPECIFICATION OF MATERIAL :-
(i) Tensile strength 1.5 MPa ASTM D 412 (ii) Elongation at break > 200% ASTM D412 (iii) Adhesion in Peel > 1.5 MPa (on concrete substrate) EN 1542 (iv) Crack Bridging ability passes upto 3.2 mm Width ASTM C 1305 (v) Permeability to water Vapour Passes upto 3.2 mm Width ASTM C 1305
(vi) Water Vapour Transmission -23 g/m2 /24 hrs ASTM E96 (vii) Water Absorption < 10% (by Mass) ASTM D 570 (viii) Microbiological Resistance No Algae & Fungal Growth ASTM D5590 Solar Reflecttance Index 102 ASTM E 1980
Note :- (i) Complete material shall be approved by AO and procured in bulk and kept in lock and key under Engineer-in-Charge.
(ii) Make : Sika, DR. Fixit or Fosroc as approved by AO. (iii) All above operations to be done in presence of authorised applicator in order. Documents of applicator as approved by AO. (iv) Submission of 10 year warranty certificate for water proofing treatment work for leekage / seepage is mandatory after completion of work. | 2,135 | SQM | 100 | ₹2,13,500 |
| 3 | Material and labour for repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete 1:1.5:3 using 12.5mm graded crushed stone aggregate and reinforced with 10mm TMT bars with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including and applying two coat of cement base paint over a coat of alkali resistant primer in upto 9mtr height complete all as specified and directed by Engineer-in-charge.
Note :- Cost of formwork and welded mesh, bldg ht upto 09 mtr, shall be deemed to be included in unit rate quoted by the Contractor. | 60 | SQM | 100 | ₹6,000 |
| 4 | Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) and including disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed by Engineer-in-charge. | 13.8 | CUM | 100 | ₹1,380 |
| 5 | Material and labour for machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete including packing all around with PCC 1:2:4 complete all as specified and directed by Engineer-in-Charge. | 80 | SQM | 100 | ₹8,000 |
| 6 | Material and labour for 75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed by Engineer-in-charge. | - | SQM | 100 | - |
| 7 | Material and labour for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in bands, string course coping apex stone bed plate kerbs and the like including weathering, slightly rounded or chamfered angle with and including necessary use and waste of form work complete all as specified and directed by Engineer-in-charge. | 0.5 | CUM | 100 | ₹50 |
| 8 | Material and labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in plinth protection finished fair & even laid in alternate bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed. | 60 | SQM | 100 | ₹6,000 |
| 9 | Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework complete all as specified and directed by Engineer-in-charge. | 5 | CUM | 100 | ₹500 |
| 10 | Material and labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-charge. | - | CUM | 100 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.39 MB
BOQ_897304.xls
BOQ • 0.61 MB
TENDER_89.pdf
Tender Documents • 0.44 MB
TENDER_AMEND_89.pdf
PDF • 12.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .